Range of flow sensors with plastic bodies and rotors. Maximum working pressure: 10 Bar. Maximum operating temperature: 80°C.

Section:

1530 Miscellaneous Fittings

Size:

See model.

Marking:

Resideo, Model, Max temperature, Max pressure & made in Japan on the front face.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

C7195A 2001 – 1/2” BSP (M). C7195B 1001 – 3/4” BSP (M). C7195C 1009 – cartridge only, to be inserted in a ø25.2 mm manifold.

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of stainless steel bodied mechanical pump shaft seals. The 491 model comprises of carbon and silicone carbide seal faces and EPDM ‘O’-rings. The 1510 model comprises of carbon and silicone carbide seal faces, EPDM ‘O’-rings and an orange NBR/aramid fibre gasket. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

491: 16 - 110mm. 1510: 25 - 120mm.

Marking:

491: Chesterton on body. 1510: Chesterton on tabs.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

491 - Chesterton 491 DINS-DINL rotary internal single seal. 1510 - Chesterton 1510 General Duty Single Cartridge Seal with orange NBR/aramid fibre Gasket.

Approval Holder:

Chesterton International GmbH

Company Name

Chesterton International GmbH

Address

Am Lenzenfleck 23, DE-85737 Ismaning

Country

Germany

View All Listings by this Company

Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

1530 Miscellaneous Fittings

Size:

½” BSP (F)

Marking:

Axor on adhesive label

Installation Requirements:

R001 R040

Expiry date:

30/04/2029

Model:

13 129 180 45 442 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

‘SCALA 2’ integrated, self-priming, plastic bodied (compact) mains pressure boosting pump. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240207701

Size:

1” BSPT (M) inlet and outlet.

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, Model, P/N no., Serial no., P/C no., technical info, manufacturing country and data matrix on adhesive label on end of motor housing.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

Scala2 Model2 3-45 AKCCDE, Scala2 Model2 3-45 AKCDDE, Scala2 Model2 3-45 AKCGDE.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240507701

Size:

Stainless steel body models (N): 1" BSP (M) (retrospectively added June 2024), 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).

Marking:

Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Model added November 2024: ALPHA SOLAR 25-**2 N 180. Where: UPM3 & ALPHA SOLAR = pump type. For UPM3 these can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (ALPHA SOLAR 1½” model and 2” N models only).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company