Directory Search Results

Print List

#2212009

Range of air vent valves with brass (covered with blue polyester coated ductile iron body) or plastic bodies and plastic floats. Maximum working pressure 16.0 bar (AP models) or 25.0 bar (AQ models). Cold water use only.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2212009
Size:
½” – 2” BSP (M)
Marking:
Plastic body – Dorot logo on label and PN on body DI body - Dorot, PN and model code on data plate.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
DAV KA Kinetic & Automatic, Air Release Valve (ARV). Cat No APECPxx000 000 01. DAV A Automatic, ARV. Cat No APEAPxx00000001. DAV MP-A Metal Plastic Automatic, ARV. Cat No AQEAPxxPB000001. DAV MP-KA Metal Plastic Kinetic & Automatic, ARV. Cat No AQECPxxPB000001. Xx denotes the size, and this can be replaced with any of the following: 50 = ½” 75 = ¾” 10 = 1” 20 = 2”
Product Images

Approval Holder:
Aquestia Ltd.
Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company
Manufacturer:
Aquestia Ltd.
Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company

Print This Approval


#2212028

Range of automatic air venting valves incorporating epoxy coated, ductile iron bodies and plastic float. Maximum operating pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2212028
Size:
DN25, DN50, DN80, DN100, DN150 & DN200
Marking:
AVK, DN and PN on body. AVK and other info on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
S851 Series comprising of models: 85102541971000 85105041111000 85108041111000 85110041111000 85115041111000 85120041111000
Product Images

Approval Holder:
AVK Valves Manufacturing Malaysia SDN BHD
Company Name
AVK Valves Manufacturing Malaysia SDN BHD
Address
Lot No. 1, Jalan SG Chadong 8 Batu 5½ Mile, Jalan Kapar 42100 Klang
Country
Selangor

View All Listings by this Company
Manufacturer:
AVK Valves Manufacturing Malaysia SDN BHD
Company Name
AVK Valves Manufacturing Malaysia SDN BHD
Address
Lot No. 1, Jalan SG Chadong 8 Batu 5½ Mile, Jalan Kapar 42100 Klang
Country
Selangor

View All Listings by this Company

Print This Approval


#2212327

Range of automatic air venting valves with brass bodies, stainless steel strainer, plastic float and EPDM ‘O’-rings and gaskets. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2212327
Size:
see model
Marking:
Yuhuan Zhengqu Fluid Intelligence Control Co., Ltd.logo, size and date of manufacture (YY-MM) on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
6036-15-00: ½" BSP (M), 6036-25-00: 1" BSP (M).
Product Images

Approval Holder:
Yuhuan Zhengqu Fluid Intelligence Control Co., Ltd.
Company Name
Yuhuan Zhengqu Fluid Intelligence Control Co., Ltd.
Address
Bingang Industrial City, Shamen Town, Yuhuan City Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:
Yuhuan Zhengqu Fluid Intelligence Control Co., Ltd.
Company Name
Yuhuan Zhengqu Fluid Intelligence Control Co., Ltd.
Address
Bingang Industrial City, Shamen Town, Yuhuan City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2211321

Range of wall mounted, thermostatic blending valves incorporating ceramic disc diverter cartridges. Inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to verify backflow protection. Product also had manual override button. Model VM207X and variants are supplied with variations of dome and single lever operating members. Model VM208X and variants are supplied with varaitions of cube type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2211321
Note:
Does not include hose and handset.
Size:
3/4” BSP (F) captive nuts. Supplied with ½” x ¾” BSP (M) offset unions.
Marking:
Alfred Victoria, Heyang on valve body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
VM207X. The following models are identical to VM207X but variations on the design of operating members: GA26, MG26, QA26, QB26, QG26, XQ26, FA26, MC26, MK26, RP26, AP26, RS26,VM207,VM507, VM607. VM208X. The following models are identical to VM208X but variations on the design of operating members: AD26, MJ26, RA26, AE26, EC26, ZB26, SC26, HC26, EV26, XA26, VM208, VM508, VM608.

Approval Holder:
KAIPING HEYANG SANITARY WARE CO., LTD
Company Name
KAIPING HEYANG SANITARY WARE CO., LTD
Address
No.18 Tangliang Road, the Third Industrial Zone Shuikou Town, Kaiping City, Guangdong 529321
Country
China

View All Listings by this Company
Manufacturer:
KAIPING HEYANG SANITARY WARE CO., LTD
Company Name
KAIPING HEYANG SANITARY WARE CO., LTD
Address
No.18 Tangliang Road, the Third Industrial Zone Shuikou Town, Kaiping City, Guangdong 529321
Country
China

View All Listings by this Company

Print This Approval


#2211904

Concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The valve can be supplied with a variation of shower kits that can consist of the following components: handsets, overhead showers, shower hoses, wall outlets, fixed arms, and isolation valves. Maximum working pressure 7 bar. Maximum working temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2211904
Size:
15mm spigot
Marking:
Valve Aqualisa and product information on adhesive label. Overhead showers Aqualisa on face or inlet connection Shower handsets Aqualisa on handle. Wall outlets Aqualisa on body. Fixed Arm Aqualisa on cover plate. Hoses Aqualisa on conical nuts. Isolation valves DM logo, size, and flow arrow on body
Installation Requirements:
R001 R008 R010 R040
Expiry date:
30/11/2027
Model:
794JK 828JK ISD.A1.BFC.21 ISD.A1.BFW.21 ISD.A1.BFW.21SU ISD.A1.BV.21 ISD.A1 BV. 21SU ISD.A1.EV.21 ISD.A1.EV.21SU OPQ.A1.BR.20 OPQ.A1.BV.20 QZD.A1.BR.20 QZD.A1.BV.20 QZSB.A1.BR.20 QZSB.A1.BV.20 QZSB.A1.BV.DVFC.INT.20 QZSB.A1.BV.DVFW.20 QZSB.A1.BV.DVFW.INT.20 QZSB.A1.BV.INT.20 QZST.A1.BR.20 QZST.A1.BV.20 QZST.A1.BV.INT.20 UTQ.A1.BR.20 UTQ.A1.BV.20 VSQ.A1.BR.20 VSQ.A1.BV.20 VSQ.A1.BV.DVFW.20
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 656 of 1708

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.