Range of double regulating valves with bronze bodies, DZR brass discs, EPDM `O`-rings and PTFE disc face. The valves incorporate a non-rising spindle headwork regulating the flow and isolation function. The D931, D933 and D934 models incorporate two pressure test points. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

250508001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

D921: ½” - 2” BSP (F x F), D921.AT: ½” - 2” NPT (F x F), D923 (Low flow): ½” BSP (F x F), D923.AT (Low flow): ½” NPT (F x F), D931: ½” - 2” BSP (F x F), D931.AT: ½” - 2” NPT (F x F), D933 (Low flow): ½” BSP (F x F), D933.AT (Low flow): ½” NPT (F x F), D934 (Ultra low flow): ½” BSP (F x F), D934.AT (Ultra low flow): ½” NPT (F x F).

Marking:

Crane, size, PN and flow arrow on body. Crane and model no. on handwheel.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

D921, D921.AT, D923 (Low flow), D923.AT (Low flow), D931, D931.AT, D933 (Low flow), D933.AT (Low flow), D934 (Ultra low flow), D934.AT (Ultra low flow).

Product Images

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Water chiller and heater units for under counter installation incorporating an approved double check valve at the inlet, to be used in conjunction with an outlet tap arrangement or flow control device, with a range of taps that are supplied with the chillers. Maximum working pressure 10.0 Bar Maximum operating temperature 98.0°C

Section:

2420 Water Coolers

Section Subtitle:

Drinking.

WRAS Approval Number:

250102705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Billi on tap body. Billi on front of unit. Technical information on adhesive label on back of unit

Installation Requirements:

R001 R006

Expiry date:

31/01/2030

Model:

Alpine Family, Cold and Ambient Water units 932060, 932120, 932125, 913000 Quadra Family 904010, 904020, 904025, 904040, 904060, 904065, 904100, 904105, 904107, 904180, 904187 X-series taps (XL- levered dispenser, XT -touch dispenser, XR-remote dispenser) XL ( 852150), XT ( 852153), XR (852156) Mixer Taps 991200, 991300, 991400, 991500, 991600, 991700, 991900 Models Added August 2025: Sahara family. Hot Water units 943020, 943025, 943065, 943060, 943120 & 943125 XL Tap font with 70mm riser. 992800 XL Tap font with 120mm riser. 992803 Slimline tap font 992810

Product Images

Manufacturer:

Billi Australia Proprietary Ltd

Company Name

Billi Australia Proprietary Ltd

Address

Unit 1, 21-35 Radford Road Reservoir, Victoria 3073

Country

Australia

View All Listings by this Company

'ITK-STE 221 (cream coloured), ITK-AL 99 (cream coloured) & ITK-AL96 (white coloured)'. Compression moulded and sintered ceramic sealing rings. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

31/03/2030

Approval Holder:

IT-Keramik Srl.

Company Name

IT-Keramik Srl.

View All Listings by this Company

'Wudu brand-NF 131118'. Factory applied, black coloured, two-component, water based epoxy coating. Mix in a 9:1 weight ratio and apply as per manufacturer's TDS 'PAMCN-V2', dated '20240821'. Cure for 1 hour@50°C. For use with water up to 50°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155014

Expiry date:

31/01/2030

Approval Holder:

Saint-Gobain Pipelines Co., Ltd. (Maanshan)

Company Name

Saint-Gobain Pipelines Co., Ltd. (Maanshan)

Address

No 1 HuaGong Road, Cihu Maanshan City, Anhui Province

Country

China

Phone

+86 5553508142

View All Listings by this Company

'JSAW– JAL (OPC-TICL)'. Factory applied, grey coloured Ordinary Portland Cement. Mix sand, cement & water in a 1.5:1.0:0.5 weight ratio and apply as per manufacturer's instructions 'JSL/QA/PR-06', version '2.0', dated '15.02.20'. Cure for 27 days@21°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155032

Expiry date:

31/01/2030

Approval Holder:

Jindal Saw Limited

Company Name

Jindal Saw Limited

Address

B-13 MIDC Tembhurni, Taluka- Madha, District –Solapur, Maharashtra, 413211

Country

India

View All Listings by this Company