Directory Search Results

Print List

#250302008

Range of wall mounted, manually operated blending valves with brass bodies (various finishes) and ceramic cartridge headworks controlling both the flow and temperature with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250302008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Needs to get installed in combination with Rapido Smart Box 35.600.
Size:
Only to be used with compatible Grohe products.
Marking:
Grohe SPA logo on rosette or Grohe logo on operating member. Models 24.259, 24.277 and 24.354 include the new Grohe SPA Logo, all other models include standard Grohe Logo.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
24.259.xxx 24.277.xxx 24.354.xxx 24.071.xxx 24.069.xxx 24.065.xx3 24.067.xxx 24.063xx1 24.061.xxx 24.059.xx3 24.057.xx1 24.055.xx2 24.053.xx1 24.051.xx2 24.046.xx3 24.048.xx3 24.044.xxx 24.042.xx2 Where xxx / xx1 / xx2 / xx3 denotes finish, can be replaced by: 000 / 001 / 002 / 003– Chrome DC0 / DC1 / DC2 / DC3 – Supersteel DA0 / DA1 / DA2 / DA3 – Warm sunset AL0 / AL1 / AL2 / AL3 – Brushed hard graphite GL0 / GL1 / GL2 / GL3 – cool sunrise IG0 / IG1 / IG2 / IG3 – chrome/gold

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#250104010

Range of wall mounted concealed, shower valves (brass bodies – various plated trim sets) incorporating a ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). Maximum operating pressure 10 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250104010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with a shower hose, handset, riser rail or spout outlet. Product to be used in combination with 01700180 AXOR iBox universal Basic set or 01400180 AXOR iBox universal 2 Basic set + 13588000 Adapter plate for iBox universal 2.
Size:
¾” BSP (F)
Marking:
Axor on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
46450xx0 46451xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250302013

Range of wall mounted, concealed, digitally controlled thermostatic blending valve with a 1, 2 or 3 outlets, incorporating a plastic body, the flow and temperature is controlled via a digital user interface. Products incorporate a built-in pump and a solenoid valve. Maximum working pressure 1.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm spigot connection
Marking:
Aqualisa logo, pressure, temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R040
Expiry date:
31/03/2029
Model:
705758 705759 705760 Models added July 2025 1013928 1013929 1001269 1001271 1001273

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#250302017

Wall mounted, bar type thermostatic blending valve, (brass bodies - various finishes), incorporating a half turn ceramic disc for manually diverting the flow between the shower handset, on off position, and the overhead shower with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button with a dome type operating member. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) x ½” BSP (M) offset unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
27 633 xx0. Models added April 2025: 24592xx0, 24593xx0. Models added July 2025: 48 794 xx0 & 48 795 xx0. Model added September 2025: 24 594 xx0. Models added September 2025: 28 823 xx0 and 28 825 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250304013

Range of wall mounted concealed thermostatic shower valves (brass bodies – various finishes) incorporating either quarter turn ceramic discs or ceramic disc diverters. Temperature is controlled independently via a thermostatic cartridge. Products incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure: 5.0 bar Maximum operating temperature: 70°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250304013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
First Fix valves must be used incjoncution with the models listed in this approval. Products are not supplied with shower hoses, handsets, overhead showers or riser rail assemblies.
Size:
¾” BSP
Marking:
St James on faceplate
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
First Fix Valves Only TH.100.F.00 First Fix Valve, 1 outlet TH.101.F.00 First Fix Valve, 2 outlet TH.102.F.00 First Fix Valve, 3 outlet TH.104.F.00 First Fix Valve, 3 outlet First Fix, 1 Outlet, 2 Handle ET.100.C.XX EATON HT.100.C.XX HATTON DN.100.C.XX DENBIGH CV.100.C.XX CAVENDISH CW.100.C.XX CRANWORTH First Fix, 2 Outlet, 2 Handle ET.101.C.XX EATON HT.101.C.XX HATTON DN.101.C.XX DENBIGH CV.101.C.XX CAVENDISH First Fix, 3 Outlet, 2 Handle ET.102.C.XX EATON HT.102.C.XX HATTON DN.102.C.XX DENBIGH CV.102.C.XX CAVENDISH First Fix, 3 Outlet, 3 Handle ET.104.C.XX EATON “XX” denotes the finish of the trim kit Finish codes are - 01 = Chrome, 02 = Matt Black, 03 = Brushed Brass, 04 = Brushed Nickel, 05 = Brushed Bronze, 06 = Gunmetal, 07 = Polished Nickel, 08 = Stainless Steel

Approval Holder:
Sanbra Limited T/A St James England
Company Name
Sanbra Limited T/A St James England
Address
17 Flitch Industrial Estate Chelmsford Raod Dunmow
Postcode
CM6 1XJ
Country
GB
Phone
01213588946
General Email
wayne.berrow@StJamesEngland.com

View All Listings by this Company

Print This Approval


#250304016

Range of wall mounted, concealed, thermostatic shower valves, (brass bodies - various trim set finishes), incorporating 2-way ceramic disc diverter valve with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The products incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate that is provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250304016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
VITRA on trim set
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
A4325836EXP - B2H7 B/I Bath Mixer V-Box Therm.,MBlack A43258EXP - B2H7 B/I Bath Mixer V-Box Therm.,Chrome A4326836EXP - B3H6 B/I Bath Mixer V-Box Therm.,MBlack A43268EXP - B3H6 B/I Bath Mixer V-Box Therm.,Chrome Models added December 2025: A4325825EXP AqHeat B-in Therm. B/S,Round,V-Box,B.Gold A4325834EXP AqHeat B-in Therm. B/S,Round,V-Box,B.Nickel A4325874EXP AqHeat B-in Therm. B/S,Round,V-Box,S.Gold A4325829EXP AqHeat B-in Therm. B/S,Round,V-Box,S.Copper A4325824EXP AqHeat B-in Therm. B/S,Soft,V-Box,B.Cop A4326825EXP AqHeat B-in Therm.B/S,Sq. ,V-Box,B.Gold A4326834EXP AqHeat B-in Therm.B/S,Sq. ,V-Box,B.Nickel A4326874EXP AqHeat B-in Therm.B/S,Sq. ,V-Box,S.Gold A4326829EXP AqHeat B-in Therm.B/S,Sq. ,V-Box,S.Copper A4326824EXP AqHeat B-in Therm.B/S,Sq. ,V-Box,B.Cop

Manufacturer:
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Company Name
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Address
4 Eylül Mahallesi Necmi Soylu Caddesi No:5 Bilecik
Postcode
11300
Country
Turkey

View All Listings by this Company

Print This Approval


#250304020

Range of shower valves with (brass bodies – various finishes) Incorporating either 1 jet or 2 jet setting. Flow is controlled by push button operating members and temperature is controlled via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower handset, hose and overhead shower. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250304020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Hansgrohe on the hand shower, overhead shower, thermostat handle and hose.
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Model:
24 580 xx0 24 581 xx0 24 582 xx0 24 583 xx0 24 590 xx0 24 591 xx0 24 595 xx0 24 596 xx0

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250108017

Range of butterfly valves with black epoxy coated ductile iron bodies & aluminium bronze discs. The closing mechanism can be controlled by lever or handwheel (via gearbox). Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2020 Valves
Section Subtitle:
Butterfly valve(s)
WRAS Approval Number:
250108017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
950W- DN50-200 950WG - DN50-300 970W - DN50-150 970WG - DN50-300 973W DN65-150
Marking:
Hattersley, model, WRAS, temp 80°C, temperature rating, PN, BS EN 593 & year of manufacture (YYYY) on ID plate on body. Size on body and disc. Hattersley on lever.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
950W: Lever Operated semi-lugged Butterfly Valve. 950WG: Gearbox Operated semi-lugged Butterfly Valve. 970W: Lever Operated fully lugged Butterfly Valve. 970WG: Gearbox Operated fully lugged Butterfly Valve. 973W: Lever operated double regulating butterfly valve fully lugged.

Approval Holder:
Hattersley
Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#2310174

Range of lever operated butterfly valves with blue epoxy coated cast iron bodies, stainless steel discs and EPDM ‘O’ rings and seals. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2020 Valves
Section Subtitle:
Butterfly valve(s)
WRAS Approval Number:
2310174
Size:
DN50 – DN300
Marking:
Winners logo on dataplate on body PN and size on body
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
WNSD71X

Approval Holder:
Tongling Winners Flow Technology CO., Ltd
Company Name
Tongling Winners Flow Technology CO., Ltd
Address
NO 4688 Qifeng Road

View All Listings by this Company

Print This Approval


#250302009

Range of eccentric lugged or wafer type butterfly valves with stainless teel or blue epoxy coated bodies and stainless steel or epoxy coated ductile iron discs, incorporating EPDM or PTFE seats (see models). Max working pressure: 10.0 Bar, 16.0 Bar or 20.0 Bar (see models). Max operating temperature 80°C or 99°C (see models).

Section:
2020 Valves
Section Subtitle:
Butterfly valve(s)
WRAS Approval Number:
250302009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Models 301-371X-125LB Wafer Type & 302-371X-125LB Lug type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’, 12’’, 14’’, 16’’, 18", 20" & 24" Models: 811-372F-150LB Wafer Type & 812-372F-150LB Lug Type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’ & 12” Lug type connections Model: D342X-16Q: DN200, DN300, DN400, DN500, DN600, DN800, DN1000 & DN1200 Flange connections
Marking:
EMV, PN, temperature and other technical information on data plate on body. Shanghai Ever Mark Valves logo, flow arrow and size cast on body. Note Flow Arrow is only present on models 811-372F-150LB & 812-372F-150LB.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
301-371X-125LB Wafer type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 302-371X-125LB Lug type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 811-372F-150LB Wafer type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C 812-372F-150LB Lug type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C D342X-16Q. Eccentric flanged type, Epoxy coated ductile iron discs and stainless steel seats, 16.0 Bar, 80°C
Product Images

Print This Approval



Back To Directory Sections

Page 652 of 887

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.