Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241002078

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models.

Marking:

Hualing logo, WRAS and date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.

Approval Holder:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No. 42 Jinshan Road Shagang Industrial Park Shuikou Town

Country

Kaiping City

View All Listings by this Company

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No. 42 Jinshan Road Shagang Industrial Park Shuikou Town

Country

Kaiping City

View All Listings by this Company

Range of stainless steel braided hoses with EPDM liner and NBR or fibre gaskets. DN13 and DN19 Maximum working pressure 10 bar. Maximum operating temperature 65°C. DN25 Maximum working pressure 10 bar. Cold water use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240704037

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

APL, Date of manufacture (YYYY) and WRAS stamped on ferrule.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

H786 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H782 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H783 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H784 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H785 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H980 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.5m H979 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H978 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H977 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H976 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H775 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H769 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H772 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H773 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H774 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H981 19mm stainless steel braided hose 3/4" F BENT x 3/4” F BENT 1.5m H829 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H830 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H831 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H832 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H984 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.5m H767 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.25m H833 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.0m H768 25mm stainless steel braided hose 1” F STR x 1” F BENT 0.75m H989 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.5m H988 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.25m H987 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.0m H986 25mm stainless steel braided hose 1” F BENT x 1” F BENT

Product Images

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire

Postcode

L40 8AF

View All Listings by this Company

Manufacturer:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire

Postcode

L40 8AF

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602065

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Dolphin logo on end connections

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Model Code: Dolphin Blue DB30abb.ccc.d.eee a’ indentifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: o DB303bb. for brass material o DB304bb. for stainless steel material  ‘bb’ identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a11. Can be either one or two digits.  ‘ccc’ identifies the length range of the metal interlocked hose from 500mm ‘DB30abb.050’ to 2000mm ‘DB30abb.200’  ‘d’ identifies the external finish to the metal parts from ‘DB30abb.ccc.1 to DB30ab.ccc.9’: o ‘.1’ denotes brushed/satin polished o ‘.2’ denotes mirror polished o ‘.3’ denotes brushed/satin polished with PVD coating o ‘.4’ denotes mirror polished with PVD coating o ‘.5’ denotes powder coated o ‘.6 - .9’ to denote other material and finish options that may be available in the future  ‘eee’ indicates the colour of PVD or powder coat that has been applied from ‘DB30abb.ccc.d.00’ to ‘DB30abb.ccc.d.999’. Can be either two or three digits.

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

SHS on end connections.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Ultraflow ranges of Direct, Indirect, Solar Single, Solar Twin, Slim Direct and Slim Indirect stainless steel insulated unvented hot water storage cylinders with external expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:

1890 Unvented Heating Apparatus

WRAS Approval Number:

2103041

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.

Size:

22mm compression (Inlet Manifold)

Marking:

Ultraflow on front, technical information on adhesive label on body.

Installation Requirements:

R001 R140 R360

Expiry date:

31/03/2026

Proviso:

All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°c and 45°c.

Model:

UD90 - ULTRAFLOW 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD120 - ULTRAFLOW 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UD150 – ULTRAFLOW 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD170 – ULTRAFLOW 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UD200 – ULTRAFLOW 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD250 – ULTRAFLOW 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UD300 – ULTRAFLOW 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UI90-ULTRAFLOW 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI120 - ULTRAFLOW 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI150 - ULTRAFLOW 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI170 - ULTRAFLOW 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI200 - ULTRAFLOW 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI250 - ULTRAFLOW 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UI300 - ULTRAFLOW 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UWD170 -ULTRAFLOW 170 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWD200 -ULTRAFLOW 200 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWD250 -ULTRAFLOW 250 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWD300 -ULTRAFLOW 300 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER UWI170 ULTRAFLOW 170 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UWI200 ULTRAFLOW 200 NDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UWI250 ULTRAFLOW 250 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UWI300 ULTRAFLOW 300 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER UDS60-ULTRAFLOW SLIM 60 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UDS90-ULTRAFLOW SLIM 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS120-ULTRAFLOW SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS150D-ULTRAFLOW SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS170D-ULTRAFLOW SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UDS200D-ULTRAFLOW SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UIS60-ULTRAFLOW SLIM 60 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS90-ULTRAFLOW SLIM 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS120-ULTRAFLOW SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS150-ULTRAFLOW SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS170-ULTRAFLOW SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UIS200-ULTRAFLOW SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:

L & M (HEATING) SUPPLIES LTD.

Company Name

L & M (HEATING) SUPPLIES LTD.

Address

103 LOCKFIELD AVENUE ENFIELD, ENFIELD, MIDDLESEX

Postcode

EN3 7PY

View All Listings by this Company