Directory Search Results

Print List

#2208599

'Everbuild Plumber's P12 Silicone Grease (Barcode: 5055492703842)'. White coloured silicone grease. Apply as per manufacturer’s instructions. For use with water up to 65°C.

Section:
5160 Lubricants
Expiry date:
31/08/2027

Approval Holder:
Everbuild Building Products Ltd- a Sika Company
Company Name
Everbuild Building Products Ltd- a Sika Company
Address
Site 41 Knowsthorpe Way, Cross Green Industrial Estate, Leeds
Postcode
LS9 0SW
Country
United Kingdom
Phone
0113 240 3456

View All Listings by this Company

Print This Approval


#2211517

'70EP124p'. Black coloured, compression moulded EPDM 'O' ring. Shore hardness 70. Tested in-radius size 0.89mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2211517
Expiry date:
30/11/2027

Approval Holder:
Bode GmbH
Company Name
Bode GmbH
Address
Kirchweg 114, 24558 Henstedt-Ulzburg
Country
Germany
Phone
Tel: +49 4193 9821234 Fax: +49 4193 9822244

View All Listings by this Company

Print This Approval


#2210521

'XR0270012'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210521
Expiry date:
31/10/2027

Approval Holder:
Changtai Sinrun Rubber-Plastic Co., Ltd.
Company Name
Changtai Sinrun Rubber-Plastic Co., Ltd.
Address
Xingtai Development Zones, Changtai county, Zhangzhou, Fujian Province
Country
China

View All Listings by this Company

Print This Approval


#2210539

'RE7012(70SH)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210539
Expiry date:
31/10/2027

Approval Holder:
Changtai Sinrun Rubber-Plastic Co., Ltd.
Company Name
Changtai Sinrun Rubber-Plastic Co., Ltd.
Address
Xingtai Development Zones, Changtai county, Zhangzhou, Fujian Province
Country
China

View All Listings by this Company

Print This Approval


#2212008

Range of wall mounted, single hole, single outlet (fixed) tap assemblies (chromium plated brass) with a solenoid valve controlling the flow and activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connecting hose. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212008
Size:
½” BSP (M).
Marking:
Stern on spout body.
Installation Requirements:
R001 R007 R040
Expiry date:
31/12/2027
Model:
351110 - Quadrat B AB 1953, 351210 - Quadrat E AB 1953, 351115 - Quadrat LB AB 1953, 351215 - Quadrat LE AB 1953.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2206063

Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2206063
Size:
½” BSP (M)
Marking:
Ideal Standard, Model, WRAS and BS1212-4 on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/06/2027
Model:
EEM90010002, EEM83230067 & EV98067

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2212304

Range of side and bottom entry BS1212-4 fill valves with plastic bodies. Maximum working pressure 10.0 bar. Coldwater use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2212304
Note:
IRN R560 applies to bottom entry valves only
Size:
½” BSP (M)
Marking:
Wirquin on body and BS1212-4 on float
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2027
Model:
Jollyfill Air range: Side entry, brass inlet: 220160, 10120694 Bottom entry, brass inlet: 220158, 10120703 Side entry, plastic inlet 220161, 10120701 Bottom entry, plastic inlet: 220159, 10120693

Approval Holder:
Wirquin Plastiques
Company Name
Wirquin Plastiques
Address
11 rue du Chateau de Bel Air 44477 Carquefou Cedex France
Phone
+33 2 40 30 68 68
General Email
catherine.vernay@wirquin.com

View All Listings by this Company

Print This Approval


#2212317

Range of bottom entry BS1212-4 telescopic fill valves with plastic bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2212317
Size:
½” BSP (M)
Marking:
Wirquin and BS1212-4 on body
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2027
Model:
Jollyfill Air Telescopic range: Bottom entry, brass inlet: 220163 10120687 Bottom entry, plastic inlet: 220162 10120700

Approval Holder:
Wirquin Plastiques
Company Name
Wirquin Plastiques
Address
11 rue du Chateau de Bel Air 44477 Carquefou Cedex France
Phone
+33 2 40 30 68 68
General Email
catherine.vernay@wirquin.com

View All Listings by this Company

Print This Approval


#2207048

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207048
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R280 R556 R571 R581 R001
Expiry date:
31/07/2027
Model:
TR9008. Model added March 2024 INST13008

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207049

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207049
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9002 Model added March 2024 INST13002

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 64 of 247

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.