Range of ‘Thermowatt’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

Thermowatt logo, Model, Voltage, Size and other information on cap.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Product Images

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company

Concealed, floor mounted basic set with DZR brass body. For use with floor standing combination tap assemblies. Maximum operating pressure 10 bar. Maximum operating temperature 70°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240704008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Hansgrohe & DR

Installation Requirements:

R001 R010

Expiry date:

31/07/2029

Model:

10452180

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of overhead shower outlets, (brass bodies - various finishes. The inlets incorporate combined EPDM washers and stainless-steel strainers. Open outlet use only Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240902003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Model 27 607 xx0 is supplied with a shower arm Model 27 620 xx0 is supplied with a ceiling connector

Size:

1/2" BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

27 607 xx0 27 620 xx0 27 623 xx0 Models added February 2025: 27 624 xx0 & 28 821 xx0. Models added September 2025: 33 291 7xx & 32 291 7xx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of overhead shower outlets with Various finishes. The inlets incorporate a stainless-steel strainer and flow regulator. Models 64400250CH, 67400250BBL, 63400250BBR, 68400250MB & 61400250BRZ Incorporates a shower arm.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310168

Note:

Open outlet use only.

Size:

½” BSP F ½” BSP M Stainless Steel Braided PEX lined hose ½” BSP captive nut

Marking:

JTP on connector

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

IX200, 23200BBR, 27200BBL, 28200MB, 21200BRZ, IX250, 23250BBR, 27250BBL, 28250MB, 21250BRZ, IX300, 23300BBR, 27300BBL, 28300MB, 21300BRZ, 32250, 38250MB, 33250BBR, 37250BBL, 64400250CH, 67400250BBL, 63400250BBR, 68400250MB & 61400250BRZ

Approval Holder:

Just Taps Plus UK Ltd

Company Name

Just Taps Plus UK Ltd

Address

Innovia House, Marish Wharf, St Mary's Rd, Langley

Postcode

SL3 6DA

Country

Berkshire

Phone

01895 44 22 11

General Email

info@jtpuk.co.uk

View All Listings by this Company

Self-closing pillar tap (chromium plated brass) with spring loaded headwork and dome operating member. The spout outlet incorporates a plastic aerator. Supplied with brass backnuts. Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240702054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Armitage shanks on operating member.

Installation Requirements:

R001 R005

Expiry date:

31/07/2029

Model:

B8267AA – Avon 21

Product Images

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Country

Staffordshire,

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company