'VULCAN VEE4 Bellow & Boot'. Black coloured, compression moulded EPDM bellows and boot components. Shore hardness 70. The bellows has an in-radius size of 3.0mm and the boot has an in-radius size of 0.9mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240755041

Expiry date:

31/07/2029

Approval Holder:

VULCAN ENGINEERING LIMITED

Company Name

VULCAN ENGINEERING LIMITED

Address

THE SOUTH WEST CENTRE Troutbeck Road Sheffield

Postcode

S8 0JR

Country

United Kingdom

Phone

0114 2493333

General Email

spencer.reynolds@vulcanseals.com

View All Listings by this Company

‘ML57308’ Black coloured, compression moulded EPDM rubber material. Shore hardness 75A. Tested in-radius size 1.0mm. Between April 2025 and April 2025, the material is for use with water up to 23°C. Between May 2025 and April 2029, the material is for use with water up to 60°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240455062

Expiry date:

30/04/2029

Approval Holder:

SumiRiko AVS Germany GmbH

Company Name

SumiRiko AVS Germany GmbH

Address

Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse

Country

Germany

View All Listings by this Company

'NBR N65WKZ'. Black coloured, injection moulded NBR rubber material. Shore hardness 59. Tested in-radius 1.0mm. For use with water up to 23°C.

Section:

5395 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255002

Expiry date:

28/02/2030

Approval Holder:

Duram Industries A.C. Ltd.

Company Name

Duram Industries A.C. Ltd.

Address

Kibbuts Ramat, Hakovesh, 44930

Country

Israel

View All Listings by this Company

'RBL-9200-20, RBL-9200-30, RBL-9200-40, RBL-9200-50, RBL-9200-60, RBL-9200-65 & RBL-9200-70'. Transparent, colourless injection moulded silicone rubber materials. Shore hardness between 20 & 70. Tested in-radii size between 0.75mm & 2.89mm. For use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240655061

Expiry date:

30/06/2029

Approval Holder:

DOW Silicones Deutschland GmbH

Company Name

DOW Silicones Deutschland GmbH

Address

Rheingaustrasse 34 65201 Wiesbaden

Country

Germany

View All Listings by this Company

‘THERMOLAST DW Compound series (DW/CS2)’. Natural (appears white), injection moulded TPE-S materials. The materials can be coloured and include the following grades: DW(1)OCX-(2): (1) – for "0" to "8" indicating hardness: DW5OCX-(2) (55 ShA). DW6OCX-(2) (65 ShA). DW7OCX-(2) (75 ShA). DW8OCX-(2) (85 ShA). DW0OCX-(2) (35 ShD). (2) - Extension of 4 digits indicating colour. The four digits stands for this: LCNT -> natural material without colour. All other numbers depends on colour. The first digit of the 4 digit colour code indicates the ground colour: 1 = yellow, 2 = orange, 3 = red, 4 = violet, 5 = blue, 6 = green, 7 = grey, 8 = brown & 9 = white or black. The other digits of the 4 digit colour code, indicates the particular shade. For use with water up to 85°C.

Section:

5586 Thermoplastic Elastomer

Section Subtitle:

Material only

WRAS Approval Number:

240655050

Expiry date:

30/06/2029

Approval Holder:

Kraiburg TPE GmbH & Co KG

Company Name

Kraiburg TPE GmbH & Co KG

Address

Friedrich-Schmidt-Str. 2, 84478 Waldkraiburg

Country

Germany

View All Listings by this Company