Range of wall mounted gas fired condensing instantaneous water heaters. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240704704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M) for 10-12L & 14~17L/min (Flow rate) ¾” BSP(M) for 22~26L/min (Flow rate)

Marking:

Company Logo Vanward, model, pressure, tempeture and and other technical info on adhesive label on side panel.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

10~12L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 26, 27, 28, 31, 32, 34 to 35) Casing 1: ST27, S21, Casing 2: ST28, S25, Casing 3: ST29, S22, Casing 4: S21B, Casing 5: S23, Casing 6: S24, Casing 7: S25(A), Casing 8: S25(B), Casing 9: S26, Casing 10: S27, Casing 11: S28, Casing 12: S31, Casing 13: S32, Casing 14: S34, Casing 15: S35. Where a typical code is: ①JSG28-14ST28、JSG14ST-S25: JSG=balance type gas water heater 28=nominal heat input(kW) 14=volume ST28=the type of casing, ST=structure platform S25=the type of casing 14~17L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 27, 28, 31, 32, 34 to 35). Same casings as above but without casing 9. ②JSG14ST-S25(B) 、JSQ28-14ST28 JSG=balance type gas water heater JSQ=forces exhaust type gas water 14=volume 28=nominal heat input(kW) ST=structure platform S25(B)=the type of casing, ST28=the type of casing 22~26L outdoor type gas water heater: JSW=outdoor type gas water heater, a= nominal heat input(kW) (fixed from 44 to 52), b=volume (fixed from 22 to 26), ST58=Wd= the type of casing (d fixed from 81, 82, 83 to 84), Casing 1: ST58, W81, Casing 2: W82, Casing 3: W83, Casing 4: W84. ③JSW44-22ST58、 JSW22HT-W81: JSW=outdoor type gas water heater 44=nominal heat input(kW) 22=volume ST58=the type of casing, HT=structure platform W81=the type of casing

JSG20-10ST27, JSG10ST-S21, JSQ20-10ST27, JSQ10ST-S21, JSG22-11ST27, JSG11ST-S21, JSQ22-11ST27, JSQ11ST-S21, JSG24-12ST27, JSG12ST-S21, JSQ24-12ST27, JSQ12ST-S21, JSG20-10ST28, JSG10ST-S25, JSQ20-10ST28, JSQ10ST-S25, JSG22-11ST28, JSG11ST-S25, JSQ22-11ST28, JSQ11ST-S25, JSG24-12ST28, JSG12ST-S25, JSQ24-12ST28, JSQ12ST-S25, JSG20-10ST29, JSG10ST-S22, JSQ20-10ST29, JSQ10ST-S22, JSG22-11ST29, JSG11ST-S22, JSQ22-11ST29, JSQ11ST-S22, JSG24-12ST29, JSG12ST-S22, JSQ24-12ST29, JSQ12ST-S22, JSG10ST-S21B, JSQ10ST-S21B, JSG11ST-S21B, JSQ11ST-S21B, JSG12ST-S21B, JSQ12ST-S21B, JSG10ST-S23, JSQ10ST-S23, JSG11ST-S23, JSQ11ST-S23, JSG12ST-S23, JSQ12ST-S23, JSG10ST-S24, JSQ10ST-S24, JSG11ST-S24, JSQ11ST-S24, JSG12ST-S24, JSQ12ST-S24, JSG10ST-S25(A), JSQ10ST-S25(A), JSG11ST-S25(A), JSQ11ST-S25(A), JSG12ST-S25(A), JSQ12ST-S25(A), JSG10ST-S25(B), JSQ10ST-S25(B), JSG11ST-S25(B), JSQ11ST-S25(B), JSG12ST-S25(B), JSQ12ST-S25(B), JSG10ST-S26, JSQ10ST-S26, JSG12ST-S26, JSQ12ST-S26, JSG10ST-S27, JSQ10ST-S27, JSG12ST-S27, JSQ12ST-S27, JSG10ST-S28, JSQ10ST-S28, JSG12ST-S28, JSQ12ST-S28, JSG10ST-S31, JSQ10ST-S31, JSG12ST-S31, JSQ12ST-S31, JSG10ST-S32, JSQ10ST-S32, JSG12ST-S32, JSQ12ST-S32, JSG10ST-S34, JSQ10ST-S34, JSG12ST-S34, JSQ12ST-S34, JSG10ST-S35, JSQ10ST-S35, JSG11ST-S35, JSQ11ST-S35, JSG12ST-S35, JSQ12ST-S35. JSG28-14ST27, JSG14ST-S21, JSQ28-14ST27, JSQ14ST-S21, JSG30-16ST27, JSG16ST-S21, JSQ30-16ST27, JSQ16ST-S21, JSG31-17ST27, JSG17ST-S21, JSQ31-17ST27, JSQ17ST-S21, JSG28-14ST28, JSG14ST-S25, JSQ28-14ST28, JSQ14ST-S25, JSG30-16ST28, JSG16ST-S25, JSQ30-16ST28, JSQ16ST-S25, JSG31-17ST28, JSG17ST-S25, JSQ31-17ST28, JSQ17ST-S25, JSG28-14ST29, JSG14ST-S22, JSQ28-14ST29, JSQ14ST-S22, JSG30-16ST29, JSG16ST-S22, JSQ30-16ST29, JSQ16ST-S22, JSG31-17ST29, JSG17ST-S22, JSQ31-17ST29, JSQ17ST-S22, JSG14ST-S21B, JSQ14ST-S21B, JSG16ST-S21B, JSQ16ST-S21B, JSG17ST-S21B, JSQ17ST-S21B, JSG14ST-S23, JSQ14ST-S23, JSG16ST-S23, JSQ16ST-S23, JSG17ST-S23, JSQ17ST-S23, JSG14ST-S24, JSQ14ST-S24, JSG16ST-S24, JSQ16ST-S24, JSG17ST-S24, JSQ17ST-S24, JSG14ST-S25(A), JSQ14ST-S25(A), JSG16ST-S25(A), JSQ16ST-S25(A), JSG17ST-S25(A), JSQ17ST-S25(A), JSG14ST-S25(B), JSQ14ST-S25(B), JSG16ST-S25(B), JSQ16ST-S25(B), JSG17ST-S25(B), JSQ17ST-S25(B), JSG14ST-S27, JSQ14ST-S27, JSG16ST-S27, JSQ16ST-S27, JSG14ST-S28, JSQ14ST-S28, JSG16ST-S28, JSQ16ST-S28, JSG14ST-S31, JSQ14ST-S31, JSG16ST-S31, JSQ16ST-S31, JSG14ST-S32, JSQ14ST-S32, JSG16ST-S32, JSQ16ST-S32, JSG14ST-S34, JSQ14ST-S34, JSG16ST-S34, JSQ16ST-S34, JSG14ST-S35, JSQ14ST-S35,JSG16ST-S35, JSQ16ST-S35. JSW44-22ST58, JSW22HT-W81, JSW52-26ST58, JSW26HT-W81, JSW22HT-W82, JSW26HT-W82, JSW22HT-W83, JSW26HT-W83, JSW22HT-W84, JSW26HT-W84.

Product Images

Approval Holder:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Manufacturer:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Range of single or twin booster pumps with stainless steel bodies and stainless-steel impellers. Maximum working pressure 8.0 Bar Maximum operating temperature 90.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240602708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSPT F 1 ¼” BSPT F 1 ½” BSPT F

Marking:

EBARA logo, model number with additional technical data on adhesive label on body

Installation Requirements:

R001 R415

Expiry date:

30/06/2029

Model:

1970056704I CDE/I 70/05 IE3 1970096604I CDE/I 70/07 IE3 1980096604I CDE/I 120/07 IE3 1980096614I CDE/I 120/106 220/380-460 IE3 1980206604I CDE/I 120/20 IE3 1970106604I CDE/I 90/10 IE3 1970106804I CDE/I 70/12 IE3 1980106604I CDE/I 120/12 IE3 1990106604I CDE/I 200/12 IE3 1990206604I CDE/I 200/20 IE3 1990256604I CDE/I 200/25 IE3 1970056600E CDME/E 70/05 IE2 1970096600E CDME/E 70/07 IE2 1970106600E CDME/E 70/12 IE2 1970106800E CDME/E 90/10 IE2 1980096600E CDME/E 120/07 IE2 1980106600E CDME/E 120/12 IE2 1980206600E CDME/E 120/20 IE2 1990106600E CDME/E 200/12 IE2 1990206600E CDME/E 200/20 IE2 1610036616I CDXE/I 70/076 220/380-460_60 IE3 1610036716I CDXE/I 70/076 220/380-460_60 SCAIE3 1610056616I CDXE/I 70/106 220/380-460_60 IE3 1610056716I CDXE/I 70/106 220/380-460_60 SCA IE3 1610075216I CDXE/I 70/156 220/380-460_60 1615056604I CDXE/I 70/05 IE3 1615056904I CDXE/I 70/05 SCA IE3 1615096504I CDXE/I 70/07 SCA IE3 1615096604I CDXE/I 70/07 IE3 1615106604I CDXE/I 90/10 IE3 1615109704I CDXE/I 90/10 SCA IE3 1620056616I CDXE/I 120/106 220/380-460_60 IE3 1620056716I CDXE/I 120/106 220/380-460_60 SCA IE3 1610075316I CDXE/I 70/156 220/380-460_60 SCA 1620076616I CDXE/I 120/156 220/380-460_60 1620076716I CDXE/I 120/156 220/380-460_60 SC 1620086516I CDXE/I120/206 220/380-460_60 SCA 1625096604I CDXE/I 120/07 IE3 1625096704I CDXE/I 120/07 SCA IE3 1625106304I CDXE/I 120/12 IE3 SCA 1625106604I CDXE/I 120/12 IE3 1625106904I CDXE/I 120/12 SCA IE3 1625206304I CDXE/I 120/20 IE3 SCA 1625206604I CDXE/I 120/20 IE3 1630076616I CDXE/I 200/156 220/380-460_60 1630086616I CDXE/I 200/206 220/380-460_60 1630086716I CDXE/I200/206 220/380-460_60SCA 1630106616I CDXE/I 200/306 220/380-460_60 1630106716I CDXE/I 200/306 220/380-460_60SCA 1635106604I CDXE/I 200/12 IE3 1635106704I CDXE/I 200/12 SCA IE3 1635206604I CDXE/I 200/20 IE3 1635206704I CDXE/I 200/20 SCA IE3 1635256604I CDXE/I 200/25 IE3 1635256704I CDXE/I 200/25 SCA IE3 1610036610E CDXME/E 70/076 220-230_60 IE2 1610056610E CDXME/E 70/106 220-230_60 IE2 1615057400E CDXME/E 70/05 IE2 1615096600E CDXME/E 70/07 IE2 1615106600E CDXME/E 90/10 IE2 1625096600E CDXME/E 120/07 IE2 1625106600E CDXME/E 120/12 IE2 1625206600E CDXME/E 120/20 IE2 1635106600E CDXME/E 200/12 IE2 1635206600E CDXME/E 200/20 IE2 1611106504I 2CDXE/I 70/10 SCA IE3 1611106510I 2CDXE/I 70/106 220/380-460_60 1611106600E 2CDXEM/E 70/10 IE2 1611106604I 2CDXE/I 70/10 IE3 1611106610I 2CDXE/I 70/106 220/380-460_60 SCA 1611126600E 2CDXEM/E 70/12 IE2 1611126604I 2CDXE/I 70/12 IE3 1611126704I 2CDXE/I 70/12 SCA 1611150200E 2CDXEM/E 70/15 IE2 1611156404I 2CDXE/I 70/15 SCA 1611156604I 2CDXE/I 70/15 IE3 1611206600E 2CDXEM/E 70/20 IE2 1611206604I 2CDXE/I 70/20 IE3 1611206804I 2CDXE/I 70/20 SCA IE3 1619206916I 2CDXE/I70/206 220/380-460_60 SCA 1619207516I 2CDXE/I 70/206 220/380-460_60 1619300214I 2CDXE/I 70/306 220/380-460_60 SCA 1619306614I 2CDXE/I 70/306 220/380-460_60 1621150200E 2CDXEM/E 120/15 IE2 1621156600E 2CDXEM/E 120/15 IE2 1621156604I 2CDXE/I 120/15 IE3 1621159604I 2CDXE/I 120/15 SCA 1621206600E 2CDXEM/E 120/20 IE2 1621206604I 2CDXE/I 120/20 IE3 1621206616I 2CDXE/I 120/206 220/380-460_60 1621206716I 2CDXE/I 120/206 220/380-460_60 SCA 1621209604I 2CDXE/I 120/20 SCA IE3 1989306316I 2CDXE/I 120/306 220/380-460_60 1989306404I 2CDXE/I 120/30 IE3 SCA 1989306604I 2CDXE/I 120/30 IE3 1989306816I 2CDXE/I120/306 220/380-460_60SCA 1989400206I 2CDXE/I 120/406 220/380-460_60 1989400216I 2CDXE/I 120/406 220/380-460_60 SCA 1989406604I 2CDXE/I 120/40 IE3 1989406704I 2CDXE/I 120/40 IE3 SCA 1999306604I 2CDXE/I 200/30 IE3 1999309604I 2CDXE/I 200/30 SCA IE3 1999400206I 2CDXE/I 200/406 220/380-460_60 1999406604I 2CDXE/I 200/40 IE3 1999409604I 2CDXE/I 200/40 SCA IE3 1999500206I 2CDXE/I 200/506 220/380-460_60 1999500216I 2CDXE/I 200/506 220/380-460_60 SCA 1999506604I 2CDXE/I 200/50 IE3 1999509604I 2CDXE/I 200/50 IE3 SCA 1999400216I 2CDXE/I 200/406 220/380_460_60SCA 1611100206E 2CDXME/E 70/106 220-230_60 IE2

Product Images

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Manufacturer:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Range of plastic, stainless steel or brass (see models) shower outlets comprising of a shower handset, shower rails and hose (Models: 58004-46XX and 58004-47XX), a shower handset only (Models: 53401-00XX, 56031-00XX, 53283-04XX, 56565-02XX, 56205-00XX, 56321-20XX and 56183-10XX) or an overhead shower head only (models: 51051-12XX, 54012-31XX, 54112-31XX and 54108-00XX). Models 56565-02XX and 54108-00XX incorporate stainless steel strainers. Maximum operating temperature 60.0°C, open outlet use.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240602035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) or (F) (see models)

Marking:

Lota on handset & shower Rail (58004-46XX & 58004-47XX only) Lota on body (all other models)

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

58004-46XX (Plastic, ½” BSP (F)) 58004-47XX (Plastic, ½” BSP (F)) 53401-00XX (Brass, ½” BSP (M)) 56031-00XX (Plastic, ½” BSP (M)) 53283-04XX (Plastic, ½” BSP (M)) 56565-02XX (Plastic, ½” BSP (M)) 56205-00XX (Plastic, ½” BSP (M)) 56321-20XX (Plastic, ½” BSP (M)) 56183-10XX (Plastic, ½” BSP (M)) 51051-12XX (Plastic, ½” BSP (F)) 54012-31XX (Stainless Steel, ½” BSP (F)) 54112-31XX (Stainless Steel, ½” BSP (F)) 54108-00XX (Stainless Steel, ½” BSP (F)) Where XX denotes the finish and can be replaced with any of the following: 01 = Chrome (All models) 23 = Polished nickel (model 53401-00XX only) 6803 = Matt black (models 56183-10XX & 56321-20XX only)

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604004

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Twyford on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

SF2104CP

Approval Holder:

Twyford Geberit Group

Company Name

Twyford Geberit Group

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926 516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company