'Tefzel® ETFE 200, 207, 280, 750, HT2181, HT2183 & HT2185'. Un-pigmented (white coloured), compression moulded ETFE material. For use with water up to 85°C.

Section:

5289 Ethylenetetrafluoroethylene (ETFE) Copolymer

Expiry date:

31/03/2028

Approval Holder:

Chemours International Operations Sàrl

Company Name

Chemours International Operations Sàrl

Address

Route du Nant-d'Avril 150, 1217 Meyrin

Country

Switzerland

View All Listings by this Company

'Teflon® FEP 100 X, 100-J, 106 X, CJ 95 X, CJ 99 X & 9302 X'. Un-pigmented (white coloured, compression moulded FEP material. For use with water up to 85°C.

Section:

5291 Fluoroethylenepropylene (FEP) Copolymer

Expiry date:

31/03/2028

Approval Holder:

Chemours International Operations Sàrl

Company Name

Chemours International Operations Sàrl

Address

Route du Nant-d'Avril 150, 1217 Meyrin

Country

Switzerland

View All Listings by this Company

''Teflon® PFA 340 X, 345 X, 350 X, 350-T-J, 440 HP X, 445 HP X, 450 HP X & 416 HP X'. Unpigmented (white coloured), compression moulded PFA materials. For use with water up to 85°C.

Section:

5293 Perfluoroalkoxy (PFA) Copolymer

Expiry date:

31/03/2028

Approval Holder:

Chemours International Operations Sàrl

Company Name

Chemours International Operations Sàrl

Address

Route du Nant-d'Avril 150, 1217 Meyrin

Country

Switzerland

View All Listings by this Company

'Teflon® PTFE 640XT X, 807N X, NXT 70, NXT 75, 6CN X, 62 X, 62N X, 62XT X, 669N X, 669 X, NXT 85, 605XT X, 6C X, 7A X, 641XT X & 650XT X’. White coloured, extruded or compression moulded PTFE material. For use with water up to 85°C.

Section:

5295 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2303553

Expiry date:

31/03/2028

Approval Holder:

Chemours International Operations Sàrl

Company Name

Chemours International Operations Sàrl

Address

Route du Nant-d'Avril 150, 1217 Meyrin

Country

Switzerland

View All Listings by this Company

'24410001 & 24410002'. White coloured, compression moulded PTFE materials. For use with water up to 85°C.

Section:

5295 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211565

Expiry date:

30/11/2027

Approval Holder:

Eautechnik GmbH

Company Name

Eautechnik GmbH

Country

Germany

View All Listings by this Company

'Titan A202'. Site applied, pale yellow coloured hydrophilic polyurethane foam. Apply as per manufacturer's Tech Sheet '03', dated '10.01.2023' and spray treated surface with water. Cure for 6 hours at an ambient temperature (19-21°C). For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5308 Repair Material

Expiry date:

31/05/2028

Approval Holder:

Metalyte Pipeworks (IMG Ltd).

Company Name

Metalyte Pipeworks (IMG Ltd).

Address

The Industrial Maintenance Group Ltd. Unit M, Riverside Industrial Estate, Fazeley, Tamworth

Postcode

B78 3RW

View All Listings by this Company

‘CRIEP50 & CRIEP80’. Black coloured, compression moulded EPDM rubber materials. Shore hardness 50 & 80 respectively. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2304539

Expiry date:

30/04/2028

Approval Holder:

Maithri Rubber Industries

Company Name

Maithri Rubber Industries

Address

3-4-28/1, Chavan Plaza, Sudhanagar, Hanamkonda, Warangal, TL 506001

Country

India

View All Listings by this Company

'EIW-54'. Black coloured, injection moulded EPDM material. Shore hardness 51 ShA. Tested in-radius size 0.5mm. For use with water up to 50°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2304542

Expiry date:

30/04/2028

Approval Holder:

AVK GUMMI A/S

Company Name

AVK GUMMI A/S

Address

Mosegaardsvej 1, DK 8670 Laasby

Country

Denmark

Phone

+45 8695 1311

General Email

avkgummi.dk

View All Listings by this Company

'Liner Code 'W' (for Butterfly Valves R480/R481/R487 & R488)'. Black coloured, compression moulded EPDM material with a shore hardness of 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211564

Expiry date:

30/11/2027

Approval Holder:

GEMÜ Gebr. Müller Apparatebau GmbH

Company Name

GEMÜ Gebr. Müller Apparatebau GmbH

Address

Fritz-Müller-Platz 1, 74676 Niedernhall-Waldzimmern

Country

Germany

View All Listings by this Company

'Sunaflex T 8165'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2305527

Expiry date:

31/05/2028

Approval Holder:

Compounds AG

Company Name

Compounds AG

Address

Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland

Phone

+41 44 953 34 36

General Email

info@compounds.ch

View All Listings by this Company