Directory Search Results

Print List

#2206059

Range of screw down stop valves with brass bodies and bonnets and EPDM seats. Maximum working pressure 20.0 bar. Cold water use only.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2206059
Size:
See models
Marking:
JET & SIZE ON BODY
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
BSP Female Threaded Stopcock: K74385 (½”), K74386 (¾”), K74387 (1”), K74388 (1¼”), K74389 (1½”) K74390 (2”). Compression stopcock: K74391(15mm), K74392 (22mm), K74393 (28mm), K74394 (35mm) K74395 (42mm) K74396 (54mm).

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2206701

Range of screw down angle valves with brass bodies (chromium plated) and NBR ‘O’-rings with a dome type operating member. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperatures: model 510052 = 95°C and model 510060 = 85°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2206701
Size:
½” BSP male inlet and outlet
Marking:
Pegler England (brand of Aalberts IPS UK Ltd.) on body.
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
510060 - V02002104: 78 Soft Seat Angle Valve, 510052 - V02002004: 79 Angle Valve.

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2207361

Range of drinking water stations. Flow is controlled via a push-button tap assembly (which incorporates a flow regulator) on all models. Model Park Tap 016 0104-TS-016_WRAS incorporates two outlets (bubbler at low-level & bottle filler at high-level). The flexible hose assembly which rises through the body of the station to the lower outlet incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Model Hall TAP_EN (indoor) incorporates one (bottle filler type) outlet with a fixed drip tray under. Street Tap 0104-TS003_WRAS incorporates one (bottle filler type) outlet. The flexible hose assembly which rises through the body of the station to the outlet incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Maximum working pressure 3.5 bar. Cold water use only.

Section:
2425 Water Fountain
Section Subtitle:
Drinking.
WRAS Approval Number:
2207361
Note:
Please note that IRN R006 applies only to model Hall TAP_EN (indoor). This is the only model with a fixed spillover level (in the form of a fixed drip tray).
Size:
8mm push fit
Marking:
Join The Pipe on operating member of tap.
Installation Requirements:
R001 R006 R150 R170 R430
Expiry date:
31/07/2027
Model:
Park Tap 0104-TS016_WRAS. Street Tap 0104-TS003_WRAS. Hall TAP_EN (indoor).
Product Images

Approval Holder:
Join The pipe
Company Name
Join The pipe
Address
Danzigerbocht 457 1013 AM Amsterdam
Country
Netherlands

View All Listings by this Company

Print This Approval


#2207521

‘Sleeve for Pipe M. Bottom Filter Nozzles DM, DS & D8. Upper Filter Nozzles AD, AP, AM & AS. Collector CB06, CB08, CC06 & CC12. Filter Nozzles P6 & P5’. Natural (appear white in colour) & red coloured, injection moulded ABS components. For use with water up to 23°C.

Section:
5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:
31/07/2027

Approval Holder:
Ilmap Srl.
Company Name
Ilmap Srl.
Address
Via S. Gazza, 2-43058 Sorbolo (PR), Italy

View All Listings by this Company

Print This Approval


#2211506

Carbongraphite AG21 P/T, MCI320/T & AG21P-3M/T. Dark grey coloured, phenolic resin filled, carbon graphite rings manufactured by cold pressing. For use with water up to 85°C.

Section:
5022 Carbon
Expiry date:
30/11/2027

Approval Holder:
Morgan Carbon Italia s.r.l.
Company Name
Morgan Carbon Italia s.r.l.
Address
Via Vittor Pisani, 20, 20124 Milano
Country
Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 603 of 2022

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.