Directory Search Results

Print List

#240502059

Range of inline or angled servicing valves incorporating a white (-W and -01 suffix models) or grey (all other models) plastic body, chrome plated brass ball, EPDM washers and EPDM ‘O’-rings. The products are either lever operated (-H and -01 suffix models) or screwdriver operated (all other models). Push fit connections are for use with copper pipe (manufactured to EN 1057), John Guest BPEX pipe or PEX barrier pipe (manufactured to BS EN 7291-3) and John Guest BPB or polybutylene barrier pipe (manufactured to BS EN 7291-2). Maximum working pressure and operating temperature: 13.24 bar @ 20°C, 6.0 bar @ 65°C.

Section:
2270 Valves
Section Subtitle:
Spherical, plastic.
WRAS Approval Number:
240502059
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R008 applies to the white models. The John Guest BPEX and BPB pipe are not covered under the scope of this approval.
Size:
Models with a tap connector: 15mm push fit x ½” captive nut. All other models: 15mm push fit or 22mm push fit.
Marking:
John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd), maximum temperature and size on body.
Installation Requirements:
R001 R008
Expiry date:
31/05/2029
Model:
SERVICE VALVES: 15SV-H: 15mm. 22SV-H: 22mm. 15SV: 15mm. 22SV: 22mm. SERVICE VALVES WITH TAP CONNECTOR: 15SVSTC: 15mm x 1/2 bsp. 15SVSTC-W: 15mm x 1/2 bsp (WHITE). 15SVSTC-01: 15mm x 1/2 bsp (WHITE). ANGLED SERVICE VALVES WITH TAP CONNECTOR: 15SVBTC: 15mm x 1/2 bsp. 15SVBTC-W: 15mm x 1/2 bsp (WHITE). 15SVBTC-01: 15mm x 1/2 bsp (WHITE).
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2312335

Range of screw down stop valves with brass bodies, incorporating EPDM gaskets. Compression connection to be used with copper pipe EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 85°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2312335
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
JMing, EN1213, flow arrow, size, WRAS, production date (MM/YY) moulded/etched on body
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
JMYG-029 15mm compression JMYG-030 22mm compression JMYG-268 15mm x 20mm compression

Approval Holder:
Ningbo Jiaming Metal Products Co. Ltd.
Company Name
Ningbo Jiaming Metal Products Co. Ltd.
Address
No.158 JinCi Road Hangzhou Wan New Zone Cixi City
Country
Zhejiang
Phone
+86-574-63575000

View All Listings by this Company
Manufacturer:
Ningbo Jiaming Metal Products Co. Ltd.
Company Name
Ningbo Jiaming Metal Products Co. Ltd.
Address
No.158 JinCi Road Hangzhou Wan New Zone Cixi City
Country
Zhejiang
Phone
+86-574-63575000

View All Listings by this Company

Print This Approval


#240504020

Range of angled valves with brass bodies (some models chrome plated). Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
240504020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Schell moulded on to Valve Body
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
05 112 - ½” BSP (M) x ⅜” BSP (M) 05 252 - ½” BSP (M) x 10mm compression 05 377 - ½” BSP (M) x ½” BSP (M) 05 257 - ½” BSP (M) x ⅜” BSP (M) 05 396 - ½” BSP (M) x ½” BSP (M) 05 398 - ½” BSP (M) x ½” BSP (M) 05 399 - ½” BSP (M) x ½” BSP (M) 05 414 - ½” BSP (M) x ⅜” BSP (M) 05 415 - ½” BSP (M) x ⅜” BSP (M) 05 419 - ½” BSP (M) x ½” BSP (M) Models added January 2025: 05 212 - ½” BSP (M) x ⅜” BSP (M) 05 217 - ½” BSP (M) x ½” BSP (M) 05 430 - ½” BSP (M) x ⅜” BSP (M) with filter
Product Images

Approval Holder:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

Print This Approval


#241204702

‘Satefy group’ with a brass inlet and a DZR brass body which incorporates a lever operated spherical valve, followed by an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and a plastic bodied pressure relief valve (set at 6.0 bar). The product incorporates a test point. The compression connections are for use copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
241204702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Caleffi logo, DN15, CR mark and flow arrow cast on body. Date of manufacture WW/YY printed on body. Caleffi and Caleffi logo, flow arrow, CE marking on pressure relief valve body. 6 bar, size, EN1491 and other technical information on pressure relief valve operating gear
Installation Requirements:
R001 R008 R120
Expiry date:
31/12/2029
Model:
528716

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#240402710

Range of motorised position pilot operated control valves with epoxy coated ductile iron bodies and stainless-steel pipework and fittings. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
2347 Valves
Section Subtitle:
Special combination assemblies, pilot operated control.
WRAS Approval Number:
240402710
Size:
DN40 up to DN1400 flanged inlet and outlet.
Marking:
Cla-Val, flow arrow, DN, PN and model number on data plate on flange.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
NG1E-138-L21KCOS (DN50 to DN600) 138-G1E-L21KCOS (DN40 to DN400) NG1E-138-L721KCOS TYTAN S (DN600 to DN800) NG1E-138-L721KCOS TYTAN M (DN900 to DN1000) NG1E-138-L721KCOS TYTAN L (DN1200 to DN1400) All valves up to DN600 have the option to be fitted with a manual operator. For sizes above 600mm, this is fitted as standard. Description of suffix codes, where: ‘K’ = Generic prefix for any subsequent letters ‘C’ = Internally and Externally epoxy coated ‘O’ = Stainless steel studs and washers for the main valve ‘S’ = Stainless steel seat and Disc guides
Product Images

Approval Holder:
Cla-Val UK Ltd.
Company Name
Cla-Val UK Ltd.
Address
Dainton House 107 Goods Station Road Tunbridge Wells
Postcode
TN1 2DR
Country
United Kingdom
Phone
01892 514400
General Email
liam.kent@cla-val.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 601 of 820

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.