Filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve (suitable for back flow protection against fluid category 3) and a stainless steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1015 Filling Loop

Size:

½” BSP (M)

Marking:

Orkli logo, 16/01/20 (production date and hour – DD/MM/YY hh:mm) on body CR &Orkli logo on double check valve body.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

9E26009

Approval Holder:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

Manufacturer:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

Range of water filters comprising of polypropylene housings and caps. The filter head incorporates an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 7.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

8mm push-fit inlet & outlet.

Marking:

Water Care Filters on side of filter body

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

30/06/2025

Model:

Activated Carbon Filters: R11079.2 – Refiner RS250. R11078.2 – Refiner RS 350. R11080.2 – Refiner RS 500. Activated Carbon Filters with Silver Ions: R11940 – Refiner RS250 AG. R11941 – Refiner RS 350 AG. R11942 – Refiner RS 500 AG.

Approval Holder:

WATER CARE FILTERS SRL

Company Name

WATER CARE FILTERS SRL

View All Listings by this Company

Manufacturer:

WATER CARE FILTERS SRL

Company Name

WATER CARE FILTERS SRL

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with Rifeng B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2005323

Size:

12mm, 16mm, 20mm , 25mm, 26mm & 32mm

Marking:

Size, Rifeng, date of manufacture (YYYYMMDD) on body of fittings. Size, Rifeng, date of manufacture and time (YYYYMMDDHHMMSS) & batch no on pipe.

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

F1C compression fittings & F5 press fittings for use with B1 multilayer PEX/AL/PEX pipe. Models added July 2022: Added F5 Connector core press fittings: 16mm – 25mm. Added F1 Connector core compression fittings: 16mm – 25mm. Added F5 Wall plated female elbow press fittings: 16mm – 20mm.

Approval Holder:

Rifeng Enterprise Group Co., Ltd.

Company Name

Rifeng Enterprise Group Co., Ltd.

Address

Rifeng Building, No.16 Zumiao Road, Foshan City, Guangdong Province

Postcode

528000

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with EBRILLE multilayer pipe. Maximum working pressure 10 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2005358

Size:

12mm, 16mm, 20mm , 25mm, 26mm & 32mm

Marking:

Size, EBRILLE, date of manufacture (YYYYMMDD) on body. Size, EBRILLE, date of manufacture and time (YYYYMMDDHHMMSS) & batch no on pipe.

Installation Requirements:

R001

Expiry date:

31/05/2025

Model:

EBRILLE PIPE MZNR12X1,5R100 MZNR16X2,0R100M/MZNR16X2,0R200M/MZNR16X2,0R500M MZNR20X2,0R100M/MZNR20X2,0R200M MZNR25X2,5R100M MZNR26X3R50M/MZNR26X3R100M MZNR32X3,0R50M/MZNR32X3,0R100M Equal straight union REM12X12 REM16X16 REM20X20 REM25X25 REM26X26 REM32X32 Reducer REMR16X12 REMR20X12 REMR20X16 REMR25X12 REMR25X16 REMR25X20 REMR26X12 REMR26X16 REMR26X20 REMR32X12 REMR32X16 REMR32X20 REMR32X25 REMR32X26 Male straight union REDFM12X1/2 REDFM12X3/4 REDFM16X3/8 REDFM16X1/4 REDFM16X1/2 REDFM16X3/4 REDFM16X1 REDFM20X3/8 REDFM20X1/2 REDFM20X3/4 REDFM20X1 REDFM25X1/2 REDFM25X3/4 REFM25X1 REDFM26X1/2 REDFM26X3/4 REDFM26X1 REDFM32X1/2 REDFM32X3/4 REDFM32X1 REDFM32X11/4 REDFM32X11/2 Female straight union REDFF12X1/2 REDFF12X3/4 REDFF16X3/8 REDFF16X1/4 REDFF16X1/2 REDFF16X3/4 REDFF16X1 REDFF20X3/8 REDFF20X1/2 REDFF20X3/4 REDFF20X1 REDFF25X1/2 REDFF25X3/4 REDFF25X1 REDFF26X1/2 REDFF26X3/4 REDFF26X1 REDFF32X1/2F REDFF32X3/4F REDFF32X1 REDFF32X11/4 REDFF32X11/2 Equal elbow RE90°12X12 RE90°16X16 RE90°20X20 RE90°25X25 RE90°26X26 RE90°32X32 Unequal elbow RE90°R16X12 RE90°R20X12 RE90°R20X16 RE90°R25X12 RE90°R25X16 RE90°R25X20 RE90°R26X12 RE90°R26X16 RE90°R26X20 RE90°R32X12 RE90°R32X16 RE90°R32X20 RE90°R32X25 RE90°R32X26 Male elbow RE90°FM12X1/2 RE90°FM12X3/4 RE90°FM16X3/8 RE90°FM16X1/4 RE90°FM16X1/2 RE90°FM16X3/4 RE90°FM16X1 RE90°FM20X3/8 RE90°FM20X1/2 RE90°FM20X3/4 RE90°FM20X1 RE90°FM25X1/2 RE90°FM25X3/4 RE90°FM25X1 RE90°FM26X1/2 RE90°FM26X3/4 RE90°FM26X1 RE90°FM32X1/2 RE90°FM32X3/4 RE90°FM32X1 RE90°FM32X11/4 RE90°FM32X11/2 Female elbow RE90°FF12X1/2 RE90°FF12X3/4 RE90°FF16X3/8 RE90°FF16X1/4 RE90°FF16X1/2 RE90°FF16X3/4 RE90°FF16X1 RE90°FF20X3/8 RE90°FF20X1/2 RE90°FF20X3/4 RE90°FF20X1 RE90°FF25X1/2 RE90°FF25X3/4 RE90°FF25X1 RE90°FF26X1/2 RE90°FF26X3/4 RE90°FF26X1 RE90°FF32X1/2 RE90°FF32X3/4 RE90°FF32X1 RE90°FF32X11/4 RE90°FF32X11/2 Equal tee RET12X12X12 RET16X16X16 RET20X20X20 RET25X25X25 RET26X26X26 RET32X32X32 Unequal tee RETR16X20X16 RETR20X16X16 RETR20X20X16 RETR20X25X25 RETR25X16X16 RETR25X16X20 RETR25X16X25 RETR25X20X16 RETR25X20X20 RETR25X20X25 RETR25X25X16 RETR25X25X20 RETR25X32X25 RETR32X16X32 RETR32X20X32 RETR32X25X25 RETR32X25X32 RETR12X6X12 RETR32X26X32 Male tee RETFM12X1/2X12 RETFM12X3/4X12 RETFM16X3/8X16 RETFM16X1/4X16 RETFM16X1/2X16 RETFM16X3/4X16 RETFM16X1X16 RETFM16X3/8X20 RETFM20X1/2X20 RETFM20X3/4X20 RETFM20X1X20 RETFM20X1/2X25 RETFM25X3/4X25 RETFM25X1X25 RETFM26X1/2X26 RETFM26X3/4X26 RETFM26X1X26 RETFM32X1/2X32 RETFM32X3/4X32 RETFM32X1X32 RETFM32X11/4X32 RETFM32X11/2X32 Female tee RETFF12X1/2X12 RETFF12X3/4X12 RETFF16X3/8X16 RETFF16X1/4X16 RETFF16X1/2X16 RETFF16X3/4X16 RETFF16X1X16 RETFF20X3/8X20 RETFF20X1/2X20 RETFF20X3/4X20 RETFF20X1X20 RETFF25X1/2X25 RETFF25X3/4X25 RETFF25X1X25 RETFF26X1/2X26 RETFF26X3/4X26 RETFF26X1X26 RETFF32X1/2X32 RETFF32X3/4X32 RETFF32X1X32 RETFF32X11/4FX32 RETFF32X11/2X32 Demountable female straight union REDFFL12X1/2 REDFFL12X3/4 REDFFL16X3/8 REDFF16X1/4 REDFFL16X1/2 REDFFL16X3/4 REDFF16X1 REDFFL20X3/8 REDFF20X1/2 REDFFL20X3/4 REDFFL20X1 REDFFL25X1/2 REDFFL25X3/4 REDFFL25X1 REDFFL26X1/2 REDFFL26X3/4 REDFFL26X1 REDFFL32X1/2 REDFFL32X3/4 REDFFL32X1 REDFFL32X11/4 REDFFL32X11/2 End cap REDC12 REDC16 REDC20 REDC25 REDC26 REDC32

Approval Holder:

Ebrille s.r.l.

Company Name

Ebrille s.r.l.

Address

Administration and Esablishment, Straded Canelli, 53A - 14049 Nizza Monferrato AT

Country

Italy

View All Listings by this Company

Range of clamp fittings incorporating DZR brass bodies, EPDM ‘O’-rings. For use with Uponor PE 100 RC pipe to EN12201 only. Maximum working pressure 16.0 bar. Maximum operating temperature 20°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007349

Size:

See models

Marking:

Uponor logo (U), CR, production code, pipe dimensions, W (wipex code on connections) and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

Wipex double union: 1018322 (size G1) 1009035 (size G3) 1009037 (size G2xG1) 1009040 (size G3xG1) 1018323 (size G1x¼) 1022281 (size G2xG1 ¼) 1009041 (size G3xG1 ¼) 1018324 (size G2) 1009042 (size G3xG2) 1018325 (size G3) Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Product Images

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company