Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. FIG 371 range incorporates a lockshield mechanism and the FIG 370 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2011084

Size:

½”, ¾” or 1” BSP (M)

Marking:

Hattersley logo, size and CR on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Hattersley FIG 371 & FIG 370 DRAINING TAPS

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2102701

Size:

See model.

Marking:

ZELB250445 model: RWC, CR and size on body. ZELB250446 model added July 2022: RWC, CR, size and BS2879 on body.

Installation Requirements:

R001 R511

Expiry date:

28/02/2026

Model:

ZELB250445: 22mm compression x ¾” BSP (M). Model added July 2022: ZELB250446 model: 28mm compression x 1” BSP (M).

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘TAQ PEX’ range of PEX lined flexible hose assemblies with either stainless steel braiding or grey polymeric (PET - Polyethylene terephthalate) braiding (ACB suffix models). Models have either EPDM ‘O’-rings and/or EPDM or silicone washers (depending on end connection). Models are also available with an optional washer incorporating a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012802

Size:

See model.

Marking:

Tucai, WRAS, year of manufacture (YY), manufacturing company (NT or TB) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

31/12/2025

Model:

TAQ PEX DN6 Hose bore = DN6, Braiding = SS. End connections = M8x1, M10x1, M15x1, M15x1 captive nut, 3/8" captive nut, ½" captive nut, pipe end 10mm (LISO 10), clip 10, clip 11, M11x1, H 3/8" valv, M12x1, compression fitting 10mm, compression fitting 15mm, 3/8" BSP, 7/16UNS, clip 9, 9/16-24UNEF captive nut, 1/2-14 NPSM captive nut. TAQ PEX DN6 ACB Hose bore = DN6, Braiding = ACB. End connections = M8x1, M10x1, M15x1, M15x1 captive nut, 3/8" captive nut, ½" captive nut, pipe end 10mm (LISO 10), clip 10, clip 11, M11x1, H 3/8" valv, M12x1, 3/8" BSP, 7/16UNS, clip 9, 9/16-24 UNEF captive nut,1/2-14 NPSM captive nut. TAQ PEX Hose bore = DN8, Braiding = SS. End connections = M10X1, M12x1, M15x1, 3/8" captive nut, ½" captive nut, M15X1 captive nut, 3/8" BSP, ½" BSP, compression fitting 10mm, compression fitting 12mm, compression fitting 15mm, pipe end 10mm (LISO10), pipe end 15mm, 3/8'' Elbow, ½'' elbow, clip 10, clip 11, M8X1, 1/8-27 NPSM, M11x1, F ¾'' , 7/16-24 UNS. TAQ PEX ACB Hose bore=DN8, Braiding = ACB. End connections = M10X1, M12x1, M15x1, 3/8" captive nut, ½" captive nut, M15X1 captive nut, 3/8" BSP, ½" BSP, compression fitting 10mm, compression fitting 12mm, compression fitting 15mm, pipe end 10mm (LISO10), pipe end 15mm, 3/8'' elbow, ½'' elbow, clip 10, clip 11, M8X1, 1/8-27 NPSM, M11x1, F ¾'', 7/16-24 UNS. Models added March 2022: TAQ PEX DN6 Hose bore = DN6, Braiding = SS. End connections = ½” BSP (M), M8x1.25, CLIP 8, pipe end 9.6mm (LISO 9.6), pipe end 8mm (LISO 8). TAQ PEX DN6 ACB Hose bore = DN6, Braiding = ACB. End connections = ½” BSP (M), M8x1.25, CLIP 8, pipe end 9.6mm (LISO 9.6), pipe end 8mm (LISO 8). TAQ PEX Hose bore = DN8, Braiding = SS. End connections = Elbow nut ¾” captive nut, M16x1, pipe end 8mm (LISO 8). TAQ PEX ACB hose bore = DN8, Braiding = ACB. End connections = Elbow nut ¾” captive nut, M16x1, pipe end 8mm (LISO 8). Models added May 2025: TAQ PEX DN6 ACB Elbow 3/8” captive nut

Approval Holder:

Tucai, S.A.

Company Name

Tucai, S.A.

Address

Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)

Country

Spain

Phone

+34 93 718 95 62

General Email

info@tucai.com

View All Listings by this Company

Manufacturer:

Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.

Company Name

Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.

Address

Ningbo Tucai Flexible Pipe Co., Ltd. : No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450 (China) TUCAI BULGARIA, Spdl. Ltd.: 7538 Aydemir Village, 39 Chernozem Street, Silistra Region (Bulgarie)

General Email

View All Listings by this Company

Range of stainless steel braided EPDM lined hose assemblies with EPDM O-rings and some models incorporate a servicing valve. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012032

Size:

SEE MODEL

Marking:

GCE, WRAS, size and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

DN17) HD125A/15W: 300mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD225A/15W: S00mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD325A/15W: 1000mmxl/2" BSP Captive Nut x 15mm Push Fit (DN17) HD425A/15W: 150mm 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD125B / 22W: 300mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD225B / 22W: 500mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD325B / 22W: 1000mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN13) HD125G / 15W: 300mm M12 x 15mm Push fit Monobloc (DN17) HD125H / 300mm x 15W 15mm Push Fit X 15mm Push Fit (DN17) HD225H / 500mm x 15W 15mm Push Fit X 15mm Push Fit (DN13) HD125F/15W: 300mm M10 x 15mm Push fit Monobloc (DN17) HD125H/22W:300mm22mm Push fit 22mm Push fit (DN17) HD225H/22W:500mm 22mm Push fit 22mm Push fit (DN17) HD125D/15W: 15mm Push fit x 1/2" BSP Captive Nut Elbow (DN17) HDW125E/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HDW225E/15W: 500mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HD125EH/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve Handle

Approval Holder:

Wavin UK

Company Name

Wavin UK

Address

Hazelhead Crow Edge Sheffield

Postcode

S36 4HG

View All Listings by this Company

Range of stainless steel, interlocked shower hoses with EPDM liner and O-rings. Open outlet use only. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2101019

Size:

½” BSP

Marking:

Jetom and WRAS on connector

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

H23B1 & H23GF

Product Images

Approval Holder:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town, Nan'an City, Fujian Province, Quanzhou City, Fujian Province, P.R. China

Country

China

Phone

+86 595 68979514

View All Listings by this Company

Manufacturer:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town, Nan'an City, Fujian Province, Quanzhou City, Fujian Province, P.R. China

Country

China

Phone

+86 595 68979514

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2101033

Size:

Bore diameters: DN11, DN12, DN 14. End connections: M8, M10, M12, M15, M3/8, M½”, F3/8”, F½”.

Marking:

WRAS, company logo and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

SX-SS-1-2-4. Where: 1 denotes the bore diameter. 2 denotes the inlet connection. 3 denotes the outlet connection. 4 denotes the length of hose (from 150mm).

Product Images

Approval Holder:

ShouXi Braided Tube Technology Co. Ltd.

Company Name

ShouXi Braided Tube Technology Co. Ltd.

Address

Workshop A-2, Zhuquanshan Industrial Zone, Songyuan Village, Duruan Town, Pengjiang District, Jiangmen City, Guangdong Province

Country

China

View All Listings by this Company

Manufacturer:

ShouXi Braided Tube Technology Co. Ltd.

Company Name

ShouXi Braided Tube Technology Co. Ltd.

Address

Workshop A-2, Zhuquanshan Industrial Zone, Songyuan Village, Duruan Town, Pengjiang District, Jiangmen City, Guangdong Province

Country

China

View All Listings by this Company

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012012

Note:

Open outlet use only.

Marking:

Solex, WRAS and date of manufacture (MM/YY) on captive nut.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

H21X0008S-01 - ½” BSP (F) conical or captive nut. H21X0008S-02 - ½” BSP (F) conical or captive nut. Models added November 2021: H21X0007S-01 - ½” BSP (F) conical or captive nut. H21X0007S-02 - ½” BSP (F) conical or captive nut. H21X0007S-03 - ½” BSP (F) conical or captive nut. H21X0007S-04 - ½” BSP (F) conical or captive nut. H21X0007S-05 - ½” BSP (F) conical or captive nut.

Product Images

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103319

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Justlink (tradename of manufacturer) or 'Jianglin', WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

JL – A*B – XX – D – E – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.

Product Images

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

‘PANASIA 051 series’ of stainless steel braided EPDM lined flexible hose assemblies with brass or chrome plated brass end connections. Maximum working pressure and operating temperatures: 16.0 bar and cold water use only. 10.0 bar @ 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103334

Size:

DN6 bore: M10*1, F3/8, M8*1. DN8 bore: M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN9 bore (1,75mm thickness): M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN9 (1,90mm thickness): M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN10 bore: M10*1, F1/2, M1/2, F15*1, M12*1, F3/4, 9/16‐24UNEF2B, F1/2‐14. DN11 bore: F1/2. DN13 bore: M10*1, F1/2, F3/4. DN14 bore: F1/2, F3/4.

Marking:

Panasia, WRAS, year of manufacture (YYYY) on crimped connection.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

PANASIA 051 Series

Product Images

Approval Holder:

Hangzhou Panasia Sanitary Ware Co. Ltd.

Company Name

Hangzhou Panasia Sanitary Ware Co. Ltd.

Address

No. 137 Baiyunyuan East Road, Tonglu, Hangzhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Hangzhou Panasia Sanitary Ware Co. Ltd.

Company Name

Hangzhou Panasia Sanitary Ware Co. Ltd.

Address

No. 137 Baiyunyuan East Road, Tonglu, Hangzhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012007

Marking:

Novoflex, WRAS, and technical info on adhesive label located on hose. VIOSPIRAL PAT UNI , year of manufacture (YY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Novaflex inox flexible connecting hose DN10, F-F 1/2'' 00-800 Novaflex inox hose F-F DN10 1/2X1/2 , 20cm 00-801 Novaflex inox hose F-F DN10 1/2X1/2 , 25cm 00-802 Novaflex inox hose F-F DN10 1/2X1/2 , 30cm 00-803 Novaflex inox hose F-F DN10 1/2X1/2 , 35cm 00-804 Novaflex inox hose F-F DN10 1/2X1/2 , 40cm 00-805 Novaflex inox hose F-F DN10 1/2X1/2 , 45cm 00-806 Novaflex inox hose F-F DN10 1/2X1/2 , 50cm 00-807 Novaflex inox hose F-F DN10 1/2X1/2 , 60cm 00-808 Novaflex inox hose F-F DN10 1/2X1/2 , 70cm 00-809 Novaflex inox hose F-F DN10 1/2X1/2 , 80cm 00-810 Novaflex inox hose F-F DN10 1/2X1/2 , 90cm 00-811 Novaflex inox hose F-F DN10 1/2X1/2 , 100cm 00-812 Novaflex inox hose F-F DN10 1/2X1/2 , 120cm 00-813 Novaflex inox hose F-F DN10 1/2X1/2 , 150cm 00-814 Novaflex inox hose F-F DN10 1/2X1/2 , 200cm Novaflex inox flexible connecting hose monoforo DN8, M10x1 - F 1/2'' 00-835 Novaflex inox hose DN8 F-M 1/2xM10x1 30CM 00-836 Novaflex inox hose DN8 F-M 1/2xM10x1 40CM 00-837 Novaflex inox hose DN8 F-M 1/2xM10x1 50CM 00-838 Novaflex inox hose DN8 F-M 1/2xM10x1 60CM 00-839 Novaflex inox hose DN8 F-M 1/2xM10x1 80CM

Product Images

Approval Holder:

Viospiral SA

Company Name

Viospiral SA

Address

10 Kehagia Str AG I Rentis 18233

Country

Piraeus

View All Listings by this Company