'Polyglass VEF'. Factory applied, two-part, off-white coloured, vinyl ester coating. Mix parts A & B in a 98:2 mass ratio and apply as per manufacturer's instructions '2/23' last reviewed July 2020. Cure for 7 days@21°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

251055024

Expiry date:

31/10/2030

Approval Holder:

Corrocoat Ltd.

Company Name

Corrocoat Ltd.

Address

Forster Street, Leeds

Postcode

LS10 1PW

Phone

+44 113 276 0760

General Email

info@corrocoat.com

View All Listings by this Company

‘Nitcote CM 210’. Site applied, two-part, grey coloured (once applied), Cementitious Waterproofing coating. Mix ‘CM 210 white’ liquid polymer and ‘CM 210 grey’ powder in a 1:3.6 weight ratio and apply two coats as per manufacturer's TDS 'UAE/0210/23/Z-1'. Cure Coat 1 for 3 hours@35°C and Coat 2 for 21 days@23°C. For use with water up to 65°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250755056

Expiry date:

31/07/2030

Approval Holder:

Al Gurg Fosroc LLC

Company Name

Al Gurg Fosroc LLC

Address

PO Box 657, 215 Community, Street No. 13, Nad Al Hamar Road, Al Ramool Industrial Area, Dubai

Country

United Arab Emirates

View All Listings by this Company

'TECHNYL ® SAFE A 219WFC V30 BK’ (black coloured) & ‘TECHNYL ® SAFE A 219WFC V30 NC’ (natural, appears off-white). Injection moulded, glass fibre reinforced polyamide 6.6 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251155013

Expiry date:

30/11/2030

Approval Holder:

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Company Name

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Address

Usine de Belle Etoile, Avenue Albert Ramboz, 69190 SAINT-FONS

Country

France

View All Listings by this Company

'Seal Ring T11/T21'. Grey coloured, extruded PE seal ring. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

250955021

Expiry date:

30/09/2030

Approval Holder:

Vanatome (Previously DAHER Valves)

Company Name

Vanatome (Previously DAHER Valves)

Address

Chemin de la buissonnée, 26241 SAINT-VALLIER

Country

France

View All Listings by this Company

'3P764921 Pipe Spacer'. White coloured (opaque), injection moulded PP Pipe Spacer. For use with water up to 85°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

250755043

Expiry date:

31/07/2030

Approval Holder:

DAIKIN DEVICE CZECH REPUBLIC s.r.o.

Company Name

DAIKIN DEVICE CZECH REPUBLIC s.r.o.

Address

Švédské valy 2, 627 00 Brno

Country

Czech Republic

View All Listings by this Company