Directory Search Results

Print List

#2206061

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. The trigger on the pull-out controls optional spray. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2206061
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection attached to check valve bodies with ½” BSP female inlets.
Marking:
Kingfisher Good Home Logo on body
Installation Requirements:
R001 R009 R090
Expiry date:
30/06/2027
Model:
5059340452524

Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2110135

Range of wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Cha models added September are also supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110135
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
+TSL on spout
Installation Requirements:
R001 R007 R009 R040
Expiry date:
31/10/2026
Model:
TSL.C051, TSL.C051.C, TSL.C051.CS, TSL.C051.CP, TSL.C051.BK, TSL.C051.BR, TSL.C051.BZ, TSL.C052, TSL.C052.C, TSL.C052.CS, TSL.C052.CS, TSL.C052.CP, TSL.C052.BK, TSL.C052.BR & TSL.C052.BZ INFRA-RED COMBINATION TAP ASSEMBLIES

Approval Holder:
The Splash Lab UK
Company Name
The Splash Lab UK
Address
Unit 34 Meadow Industrial Estate Stockport
Postcode
SK1 2BU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2302800

‘Type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) incorporating a float operated valve controlling the flow. The inlet hose incorporates an isolation valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
0009 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
WRAS Approval Number:
2302800
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device.
Size:
Stainless-steel braided EPDM lined flexible hose assembly with 15mm push fit connection.
Marking:
Arrow Valves, Tel No, website, model, fluid catergory 5 protection, and break tank with Type AB Airgap on adhesive label on drip tray.
Installation Requirements:
R001 R574
Expiry date:
29/02/2028
Model:
AB18

Approval Holder:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Country
Herts
Phone
01442 823 123
General Email
enquiries@arrowvalves.co.uk

View All Listings by this Company
Manufacturer:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Country
Herts
Phone
01442 823 123
General Email
enquiries@arrowvalves.co.uk

View All Listings by this Company

Print This Approval


#2211306

Spring loaded resilient trim check valve cartridge with a plastic body and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2211306
Size:
DN50
Marking:
Korie, OV50, flow arrow, WRAS, ACS.
Installation Requirements:
R001
Expiry date:
30/11/2027
Model:
Korie OV50, OV50200000

Approval Holder:
Yuhuan Korie Plastics Co., Ltd.
Company Name
Yuhuan Korie Plastics Co., Ltd.
Address
Technology Industry Functional Area, Chumen Village, Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Yuhuan Korie Plastics Co., Ltd.
Company Name
Yuhuan Korie Plastics Co., Ltd.
Address
Technology Industry Functional Area, Chumen Village, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2211318

Spring loaded resilient trim in-line check valve cartridge with acetal body, incorporating a stainless steel spring and NBR or EPDM ‘O’-rings. To be housed in a specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C for 31.4232.0; 85°C for 31.0030.0.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2211318
Size:
see model
Marking:
Neoperl logo, DVGW, WRAS, DN moulded on body
Installation Requirements:
R001
Expiry date:
30/11/2027
Model:
31.4232.0 OV32/DN32 31.0030.0 OV32/DN32-HT

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 592 of 2358

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.