Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2201332

Range of pump inverters with plastic bodies, NBR rubber and EPDM rubber seals and ‘O’-rings. The products incorporate an inline resilient trim non-return valve. Maximum working pressure 13.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Size:: 1¼” BSP (M) inlet x 1½” BSP (F) outlet.
Marking:: DAB Water Technology on front casing. Manufacturer name, CE marking, date of manufacture (N.X.YYWW, where N.x = product revision index) and other technical information on adhesive label on side of casing.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: Active driver plus M/T 1.0 Active driver plus M/T 2.2 Active driver plus T/T 3 Active driver plus T/T 5.5 Active driver plus M/M 1.1 Active driver plus M/M 1.8/DV Active driver plus M/M 1.5/DV Models are named “Active driver plus x/y z” or “Active driver plus x/y z/DV” Where: x indicates the configuration of the entry line, which can be monophase (“M”) or threephase (“T”), y indicates the configuration of the exit line, which can be monophase (“M”) or threephase (“T”), z indicates the maximum mechanical power of the pump’s motor and “DV” indicates dual voltage models (able to work at 115V or at 230V).

Product Images

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company
Manufacturer:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

WRAS Approval Number: #2201032

Bypass valve assembly with a plastic body and push/pull operating method to switch flows between different outlets. The product incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Size:: ¾” BSP (M)
Marking:: Culligan (owners of Harvey Water Softeners), CBP01 and flow arrows on body.
Installation Requirements:: R001 R008
Expiry date:: 31/01/2027
Model:: G3920

Product Images

Approval Holder:: Harvey Water Softeners

Company Name
Harvey Water Softeners
Address
Hipley Street Old Woking Surrey
Postcode
GU22 9LQ
Country
United Kingdom
Phone
01483 753430
General Email
papillon.bleeker@harvey.co.uk

View All Listings by this Company

WRAS Approval Number: #2112012

Union ball, non-return valve with a plastic PVC body. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2112012
Note:: Does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.
Size:: 20mm (F) solvent cement connection
Marking:: Company logo (ERA), PN and size on body
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: UBC02 20mm

Product Images

Approval Holder:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2203303

Range of three or four-hole single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Four hole models Incorporate quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet.. Three hole models Incorporate a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator and is connected to the headworks via stainless steel braided PEX lined hose assemblies. The product is supplied with a shower hose and shower handset. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:: 1530 Miscellaneous Fittings
Size:: 15mm compression.
Marking:: DTC53 on rear of the body. Methven on body.
Installation Requirements:: R001 R006 R007 R030
Expiry date:: 31/03/2027
Model:: 3 Hole models: MT3BSMCP MT3BSMBK MT3BSMBB MT3BSMBN MT3BSMGM 4 hole models: MT4BSMCP MT4BSMBK MT4BSMBB MT4BSMBN MT4BSMGM

Product Images

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #2203306

Range of concealed thermostatic mixing valves with DZR brass bodies incorporating a thermostatic cartridge controlling the temperature. The inlets incorporate asingle check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2203306
Note:: Shower hose and shower handset are not part of this approval
Size:: ¾” BSP (F)
Marking:: FM Mattsson, DR and model number on body.
Installation Requirements:: R001 R010 R040
Expiry date:: 31/03/2027
Model:: 51939120 51939121 51939122 51939123 51909008

Product Images

Approval Holder:: FM Mattsson Mora Group AB

Company Name
FM Mattsson Mora Group AB
Address

View All Listings by this Company
Manufacturer:: FM Mattsson Mora Group AB

Company Name
FM Mattsson Mora Group AB
Address

View All Listings by this Company