Directory Search Results

Print List

#2111364

Greenstar Heatslave II range of floor standing oil-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system, which incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The cold water inlet incorporates a screwdriver operated spherical valve followed by a plastic flow regulator inserted within the pipework. Maximum working pressure: Primary circuit 2.5 bar. Secondary circuit 10.0 bar. Maximum operating temperature 82°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2111364
Note:
Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999. R430 applies to the EXT models only.
Size:
Primary: 28mm copper tail (25/32 models), 22mm copper tail (all other models). Secondary: 15mm inlet x 22mm copper tail outlet.
Marking:
Worcester (brand of Bosch Thermotechnology Ltd) and Worcester logo on front casing. Data label, Worcester and technical information on inside cover.
Installation Requirements:
R001 R140 R360 R430
Expiry date:
30/11/2026
Model:
7 731 600 165 Greenstar Heatslave II 12/18 ErP+, 7 731 600 166 Greenstar Heatslave II 18/25 ErP+, 7 731 600 167 Greenstar Heatslave II 25/32 ErP+, 7 731 600 168 Greenstar Heatslave II EXT 12/18 ErP+, 7 731 600 169 Greenstar Heatslave II EXT 18/25 ErP+, 7 731 600 170 Greenstar Heatslave II EXT 25/32 ErP+, 7 731 600 260 Greenstar Heatslave II 12/18 2022+, 7 731 600 261 Greenstar Heatslave II 18/25 2022+, 7 731 600 262 Greenstar Heatslave II 25/32 2022+, 7 731 600 263 Greenstar Heatslave II EXT 12/18 2022+, 7 731 600 264 Greenstar Heatslave II EXT 18/25 2022+, 7 731 600 265 Greenstar Heatslave II EXT 25/32 2022+.

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Bosch Thermotechnology Ltd.
Company Name
Bosch Thermotechnology Ltd.
Address
Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire
Postcode
S45 9BY
General Email

View All Listings by this Company

Print This Approval


#2205321

Range of electric combination boilers providing heating and instantaneous hot water. The heating system incorporates an expansion vessel and pressure relief valve (set at 3.0 bar). The DHW inlet and outlet incorporate spherical servicing valves. Fittited with a CAB device keyless filling link, verifired by test, suitable for category 3 backlfow protection. Maximum working pressure on central heating circuit 2.5 bar & Domestic Hot Water 10bar. Maximum operating temperature 80°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2205321
Size:
15mm compression x 22mm compression.
Marking:
E.C.A on front casing. Manufacturer, address, model no, QR code and other technical information on side panel.
Installation Requirements:
R001 R140
Expiry date:
31/05/2027
Model:
8116270010 - Arceus/Cure plus/Electus EK 12 MT UK, 8116271010 - Arceus/Cure plus/Electus EK 15 MT UK, 8116272010 - Arceus/Cure plus/Electus EK 18 MT UK 8116273010 - Arceus/Cure plus/Electus EK 24 MT UK & 8116274010 - Arceus/Cure plus/Electus EK 27 MT UK
Product Images

Approval Holder:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company
Manufacturer:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company

Print This Approval


#2204058

Hydraulic block assembly comprising of a flow regulator, central heating pump assembly and a stainless-steel plate heat exchanger. Maximum working pressures: DHW circuit: 10.0 Bar Central heating circuit: 2.5 Bar Maximum operating temperature: DHW Circuit: 65.0°C Central heating circuit: 90.0°C

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2204058
Size:
DHW Circuit: ½” BSP (M) Central heating circuit: ¾” BSP (M)
Marking:
KD, made in KOREA on adhesive label on pump casing and motorized valve. NAIVIEN on pump casing
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
NCB 300 Range: 30029242 28kW 30029241 37kW 30029112 41kW

Approval Holder:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company
Manufacturer:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company

Print This Approval


#2204016

Range of commercial ice making machines with flow controlled via solenoid valve. Maximum working pressure 8 bar. Cold water use.

Section:
1500 Ice Making Machine(s)
Size:
PVC lined flexible hose assembly with 3/4" BSP captive nut end connections
Marking:
Hoshizaki on front panel, Hoshizaki, model, product info on left side panel
Installation Requirements:
R001 R009 R150 R171 R511
Expiry date:
30/04/2027
Model:
FM-60KE-HC FM-60KE-HC-N FM-80KE-HC FM-80KE-HCN FM-120KE-HC FM-120KE-HCN FM-120KE-50-HC FM-120KE-50-HCN FM-150AKE-HC FM-150AKE-HCN FM-300AKE-HC FM-300AKE-HCN FM-480AKE-HC FM-480AKE-HCN FM-480AWKE-R452-SB FM-480AWKE-R452N-SB FM-600AKE-R452-SB FM-600AKE-R452N-SB FM-600AWKE-R452-SB FM-600AWKE-R452N-SB FM-750AKE-R452-SB FM-750AKE-R452N-SB FM-1000AKE-R452-SB FM-1000AKE-R452N-SB FM-1200ALKE-R452-SB FM-1200ALKE-R452N-SB FM-600ALKE-CO2-SB FM-600ALKE-CO2N-SB FM1200ALKE-CO2-SB FM-1200ALKE-CO2N-SB

Approval Holder:
Hoshizaki Europe Ltd
Company Name
Hoshizaki Europe Ltd
Address
Telford 70 Stafford Park 7 Telford
Postcode
TF3 3BQ
Country
Shropshire

View All Listings by this Company
Manufacturer:
Hoshizaki Europe Ltd
Company Name
Hoshizaki Europe Ltd
Address
Telford 70 Stafford Park 7 Telford
Postcode
TF3 3BQ
Country
Shropshire

View All Listings by this Company

Print This Approval


#2201024

Range of in-line water meters with brass bodies and plastic inlet filters. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C (SJ & ELECTO-SJ models) Maximum operating temperature 30°C (AP VARIO and AP RADIO models)

Section:
1505 Water Meters
Size:
DN15 - ¾” BSP (M) inlet and outlet. DN20 - 1” BSP (M) inlet and outlet.
Marking:
Maddalena logo on meter face or sealing ring. CE, year of manufacture (YYYY) and other technical information on meter face. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
SJ, SJ PLUS, SJ EVO, ELECTO SJ models (DN15, length of body 110, 115, 120, 130mm / DN20, length of body 115, 130mm). AP VARIO, AP RADIO models (DN15, length of body 80, 110, 130mm / DN20, length of body 130mm).

Approval Holder:
Maddalena SpA
Company Name
Maddalena SpA
Address
via G.B. Maddalena 2/4 Povoletto (Udine)
Postcode
33040
Country
Italy
Phone
+39 0432 634811
General Email
emanuele.ferrari@maddalena.it

View All Listings by this Company
Manufacturer:
Maddalena SpA
Company Name
Maddalena SpA
Address
via G.B. Maddalena 2/4 Povoletto (Udine)
Postcode
33040
Country
Italy
Phone
+39 0432 634811
General Email
emanuele.ferrari@maddalena.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 58 of 493

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.