Directory Search Results

Print List

#240655005

'6741'. Brown coloured, compression moulded FKM material. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 85°C.

Section:
5375 Rubbers
Section Subtitle:
Fluorocarbon - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655005
Expiry date:
30/06/2029

Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval


#240555027

'TEC S27 R.-60 rosso 'O'-rings' & Gaskets. Red coloured, injection moulded silicone rubber 'O'-rings & gaskets. Shore hardness 60. Tested in-radii sizes between 0.5mm & 2.67mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
240555027
Expiry date:
31/05/2029

Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2203379

Wall mounted electric heater, incorporate a manually operated push button valve controlling the flow and plastic strainer on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:
1361 Heaters
Section Subtitle:
Electric Shower
WRAS Approval Number:
2203379
Size:
15mm plastic pipe.
Marking:
Redring, model, address and other technical information on adhesive label on bottom panel.
Installation Requirements:
R001 R040
Expiry date:
31/03/2027
Model:
43678902

Approval Holder:
RKW Ltd
Company Name
RKW Ltd
Address
Sutton House Berry Hill Road
Postcode
ST4 2NL

View All Listings by this Company

Print This Approval


#240402073

Range of single hole, single outlet electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate plastic aerators. Maximum working pressure 8.0 Bar. Maximum operating temperature 65.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240402073
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Dudley on body.
Installation Requirements:
R001 R006 R009
Expiry date:
30/04/2029
Model:
Electroflo Arc Battery Electroflo Arc Mains

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#240502717

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, bottom or side entry type with brass ½’’ or ¾” BSP inlet. The inlet incorporates a strainer, models incorporate a delay fill function. The bottom entry valves are height adjustable. Maximum working pressure - 10 Bar, Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240502717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R560 and R562 applies to the bottom entry valves only.
Size:
See Models.
Marking:
Viva, BS1212-4 and Datum level on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
31/05/2029
Model:
SKYAIR01 with ½” BSP (M) SKYAIR02 with ½” BSP (M) SKYAIR03 with ¾” BSP (M) SKYAIR04 with ¾” BSP (M)
Product Images

Approval Holder:
Mercantile Ventures Ltd ta Viva Sanitary
Company Name
Mercantile Ventures Ltd ta Viva Sanitary
Address
Units 1-3 Capitol Trading Park Liverpool
Postcode
L33 7SY
Country
United Kingdom
General Email
allan.hanson@vivasanitary.co.uk

View All Listings by this Company

Print This Approval


#240602711

Range of spring loaded resilient trim check valve cartridges with plastic bodies, stainless steel spring and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 16 Bar Maximum operating temperature 65°C (model OV15/DN15-EPDM 31.0001.0 only) Maximum operating temperature 85°C for all other models

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
240602711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Neoperl, size, flow arrow and WRAS on body Note: flow arrow is not on model 31.0022.0
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
OF15/DN10-F1 31.0015.0 MODELS ADDED OCTOBER 2024 OF15/DN15-HT 31.0024.0 OV15/DN15-HT 31.0022.0 MODELS ADDED NOVEMBER 2024 OF15/DN10-F1-pr 31.0074.0 OF15/DN15 31.0006.0 OF15/DN15-GF 31.0007.0 OF15/DN15-pr 31.0069.0 OV15/DN15-EPDM 31.0001.0 Models added December 2024: OV15/DN15-pr 31.0070.0 OF15/DN15-EPDM 31.0032.0 Models added December 2024 OF20/DN20 31.4520.0 OF20/DN20-EPDM 31.0057.0 OF20/DN20-PR 31.4289.0 OV20-DN20-pr 31.0072.0 OV40/DN40 31.4240.0 OV50/DN50 31.4250.0 Models added June 2025: OV20/DN20-HT 31.0012.0 OV25/DN25-HT 31.0028.0
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2209072

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209072
Marking:
MF, WRAS, , size, PN, flow arrow and CR on body.
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
M37040000DZR ½” BSP (F) inlet/outlet M37060000DZR ¾” BSP (F) inlet/outlet M37080000DZR 1” BSP (F) inlet/outlet M37100000DZR 1.1/4" BSP (F) inlet/outlet M37120000DZR 1½” BSP (F) inlet/outlet M37160000DZR 2” BSP (F) inlet/outlet

Approval Holder:
Masterflow Products Limited
Company Name
Masterflow Products Limited
Address
Globall House 95 Vantage Point West Mindlands
Postcode
DY6 7FT
Country
United Kingdom

View All Listings by this Company

Print This Approval


#240602706

Assisted bath incorporating a thermostatic mixing valve to control both the flow and temperature to either a spout outlet or shower handset. The discharge from the bath spout and shower handset in via a type AUK 3 airgap, verified by measurement, suitable for Fluid Category 5 backflow protection. The bath has adjustable height and tilt functions. Maximum working pressure: 6 Bar Maximum operating temperature: 45 °C

Section:
0055 Baths
Section Subtitle:
Assisted Bathing Units
WRAS Approval Number:
240602706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with a 22mm pushfit end connection.
Marking:
Reval on front of bath.
Installation Requirements:
R001 R010 R006
Expiry date:
30/06/2029
Model:
7200.00 UK - Transcare Assisted Bath
Product Images

Approval Holder:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company

Print This Approval


#240604016

Range of aerators with plastic bodies and EPDM ‘O’-rings. Open outlet use only. Maximum operating temperature 65ºC.

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
240604016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Neoperl laser etched on body
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
07.3180.000 - Dual-Stream PCA 1.5gpm f M22 x 1 - Dual Stream Aerator - M22 x 1, 07.3180.200 - Dual-Stream PCA 1.5gpm f M22 x 1 w/o washer - Dual Stream Aerator - M22 x 1, 07.3181.000 - Dual-Stream PCA 1.5gpm f M22 x 1,25 - Dual Stream Aerator - M22 x 1,25, 06.4010.000 - Swivel f M22 x 1 – m M22 x 1 STD d24 AT - Optional Swivel - M22 x 1 STD, 06.4011.000 - Swivel f M22 x 1,25 – m M22 x 1,25 STD d24 AT - Optional Swivel - M22 x 1,25 STD, 06.9001.0 - Snodo STD-IT IG-AG M22 Liscio - Optional Swivel - M22, 07.3184.000 - DS swivel AT M22 - Dual Stream Aerator with Swivel - M22, 07.3185.000 - DS swivel AT M22 x 1,25 - Dual Stream Aerator with Swivel - M22 x 1,25.
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#240602053

Single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240602053
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 1/2" BSP captive nut end connections
Marking:
Zhejiang Xindong Sanitary Ware Co., Ltd logo on body
Installation Requirements:
R001 R090
Expiry date:
30/06/2029
Model:
T1040 T1036
Product Images

Approval Holder:
ZHEJIANG XINDONG SANITARY WARE CO., LTD
Company Name
ZHEJIANG XINDONG SANITARY WARE CO., LTD
Address
Xuanmen Industrial Zone Yuhuan Zhejiang
Postcode
317608
Country
China
General Email
310860331@qq.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 567 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.