Directory Search Results

Print List

#241004027

Range of single-hole, multiple outlet, swivel, combination tap assemblies (brass bodies - various finishes) a quarter turn ceramic disc controlling the flow to the swivel arm with a dome type operating member and a ceramic cartridge with a single lever controlling the flow to the pull-out spray outlet incorporating a plastic aerator. The spray outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway 98°C, for mixed water pathway 65C and purified water pathway 85°C

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
WRAS Approval Number:
241004027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R170 only applies to the pure water outlet on the swivel arm.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections
Marking:
NLB on body.
Installation Requirements:
R001 R006 R009 R010 R090 R170
Expiry date:
31/10/2029
Model:
14013** & 13012D** ** represent different finishes No suffix: Chrome plated H: Black N: Nickel brushed GJS: Zirconium gold brushed G: Zirconium gold QTSL: Brushed bronze bright QTS: Brushed bronze matte TJ: Titanium gold TJLS: Titanium gold brushed MGJ: Rose gold MGJL: Rose gold brushed HGT: Red bronze HTL: Yellow bronze brushed HTS: Red bronze brushed PVDQH: Gun grey HQ: Gun grey brushed Q: Bronze DYB: Matte white STS: Acid copper brushed BZ: Spray pearl white DMGJ: Light rose gold brushed
Product Images

Manufacturer:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE QINGGANG, YUHUAN TAIZHOU ZHEJIANG
Country
China

View All Listings by this Company

Print This Approval


#241002038

Range of single hole, single outlet (fixed) electronically controlled tap assemblies. Incorporating a solenoid valve activated via an infra-red sensor. The inlets to the control box incorporate stainless steel strainers and the outlet incorporates a plastic aerator. Maximum working pressure: 8 Bar Maximum operating temperature: 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241002038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot x 1/2" BSP (F) adaptor connected to a ½” BSP (M) x ½” BSP (M) solenoid connected to stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
Stern Logo on tap cover
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
225610: Touch free B AB1953 & 225710: Touch free E AB1953

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2303396

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303396
Size:
½” BSP (M)
Marking:
Crosswater logo inside cistern. 6L waterline on adhesive label within cistern
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2028
Model:
WCF80X45R WCC46X39R WCF98X45R

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2112372

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112372
Size:
½” BSP (M)
Marking:
Duravit on adhesive label bon body Duravit on flush plate Duravit, date of manufacture YYYY & Model on adhesive label inside cistern 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
Durasystem range WD1034000080 WD1029000080

Approval Holder:
Duravit UK Ltd.
Company Name
Duravit UK Ltd.
Address
Unit 7 Stratus Park Brudenell Drive Brinklow Milton Keynes
Postcode
MK10 0DE

View All Listings by this Company

Print This Approval


#240602717

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602717
Size:
½” BSP (M)
Marking:
Bagnodesign, WRAS and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
BAGNODESIGN AQE-B695-D13-ESG1

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 566 of 892

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.