'PPA 571 ES Blue 536'. Factory applied, blue coloured polyolefin coating. Apply as per manufacturer's instructions dated '08/2022'. Cure for 20 minutes@200°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2112531

Expiry date:

31/12/2026

Approval Holder:

Plascoat Systems Ltd.

Company Name

Plascoat Systems Ltd.

Address

Farnham Trading Estate, Farnham, Surrey

Postcode

GU9 9NY

Phone

+44 (0) 1252 733 777

General Email

sales@plascoat.com

View All Listings by this Company

'UPS 505 WAU Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet ‘TDS – UPS505WAU - Version 6 – August 2022'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205567

Expiry date:

31/05/2027

Approval Holder:

Unique Polymer Systems Ltd.

Company Name

Unique Polymer Systems Ltd.

Address

Unit 19, Link Business Centre, Worcs.

Postcode

WR14 1UQ

View All Listings by this Company

'Devi Flosto GRP (SMC) Hot Press Moulded Tank Panels' (manufactured from SMC 523/35). Grey coloured, hot press moulded GRP panels with a thickness of between 3.0mm & 16.0mm. For use with water up to 23°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2202567

Expiry date:

28/02/2027

Approval Holder:

m/s. Devi Polymers Pvt. Ltd.,

Company Name

m/s. Devi Polymers Pvt. Ltd.,

Address

NP 23 & 24, Developed Plot, Ekkattuthangal, Chennai – 600032. Tamilnadu

Country

India

Phone

+91 44 2225 0359/2225 1502 Fax: +91 44 840804

General Email

devi@xlweb.com

View All Listings by this Company

'Silicopaste 312500'. White coloured silicone grease. Apply as per manufacturer’s instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

31/08/2027

Approval Holder:

BRB International

Company Name

BRB International

Address

Branskamp 12, 6014 CB Ittervoort

Country

Netherlands

Phone

+31 475 560 300

General Email

info@brbbv.com

View All Listings by this Company

‘VP1620-WR & VP-2020-WR’. Single layer, cream coloured, extruded PEX-b tubes. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2206533

Expiry date:

30/06/2027

Approval Holder:

Zhejiang Valtec Plumbing Equipment Co., Ltd.

Company Name

Zhejiang Valtec Plumbing Equipment Co., Ltd.

Address

No. 121 Hongxing Road, Xiaoshan District, Hangzhou City,

Country

China

View All Listings by this Company