The range of WC cisterns incorporating a BS 1212-4:2016 side entry or bottom entry float operated inlet valve providing a Type AG air gap arrangement and a flush outlet valve operated via a push button assembly for either full or reduced flush. Maximum operating pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

241204725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Geberit etched to flush plate Water line and volume within cistern Geberi, model and other info etchen within cistern on backplate

Installation Requirements:

R001 R280 R556 R581

Expiry date:

31/12/2029

Model:

Geberit Alpha Duofix 82cm, 98cm and 112cm Geberit Alpha Concealed Cisterns 82cm & 109cm

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies, models AI-903215, Al-903222 & AI-903228 are chrome plated. Maximum working pressures: AI-903215, AI-903222 & AI-903020 16 bar. AI-903032, AI-903040 & AI-903050 10 bar. Maximum operating temperature 60°C Added September 2025 Maximum working pressure 10 Bar (AI-903025) Maximum working pressure 16 Bar (AI-903228) Maximum operating temperature 85°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250302709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

AI-903215, AI-903222 Airaga logo, CR, eco fil & flow arrow on body. Size on nut. AI-903020: Altecnic logo, flow arrow, size, pressure & CR on body. AI-903032, AI-903040 & AI-903050: Airaga logo, Eco fil, CR, size, flow arrow and made in Italy on body Marking added September 2025: AI-903228 – Airaga logo, flow arrow, CR on body AI-903025 – Altecnic logo, flow arrow, CR, size on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

AI-903215 (15mm compression inlet/outlet) AI-903222 (22mm compression inlet/outlet) AI-903020 (¾” BSP (F) inlet/outlet) Model added June 2025: AI-903015 (1/2" BSP (F) inlet/outlet Models added June 2025: AI-903032 1 ¼” BSP (F) inlet/outlet, AI-903040 1½” BSP (F) inlet/outlet, AI-903050 2” BSP (F) inlet/outlet. Models added September 2025: AI-903228, 28mm compression inlet/outlet AI-903025, 1” BSP F inlet/outlet

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of single hole, single outlet fixed (over the rim swivel nozzle) bidet combination tap assemblies stainless steel or brass bodies with various finishes, incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a swivel nozzle with a plastic aerator. The products are also supplied with a lever type pop-up waste. Maximum working pressure 3.0 Bar Maximum operating temperature 60.0°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

250402006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP (F) captive nut end connections.

Marking:

VOLA on Operating Member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2030

Model:

VOLA HV4-XX Model VOLA HV4-XX made in Brass or Stainless-steel material are available with the different surface finish. Suffix “XX” indicate the number of surface and denotes: For Brass Versions: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, B61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. For Stainless Steel Versions: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating ceramic cartridge headworks and dome type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure; 5 Bar Maximum operating temperature 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

241002094

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Scudo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2029

Model:

KO‐001 KO‐021 KO‐011 KO‐031 KO‐002 KO‐022 KO‐012 KO‐032 KO‐003 KO‐023 KO‐013 KO‐033

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Single hole, single outlet, fixed combination tap assembly (chrome plated brass body) incorporating a sequential headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The inlets incorporate a stainless steel strainer and a single check valve cartridge verified by test suitable for backflow protection against Fluid Category 2. Maximum working pressure 10 Bar Maximum operating temperature 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250702001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assembly with a 1/2” BSP (F) captive nut end connector, to a 1/2” BSP (M) x 1/2” BSP (F) check vale housing to a ½” BSP (M) x 15mm compression fitting.

Marking:

Edison on indice, Edison on rear of body, DR on check valve body

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Model:

9K2169CP – Edison W3

Manufacturer:

Zhuhai Edison Smart Home Co., Ltd

Company Name

Zhuhai Edison Smart Home Co., Ltd

Address

East Building, of Seagull kitchen and Bath Products Co., Ltd. and Bath Products Co., Ltd. Fushan Industrial Zone Qianwu, Doumen District Zhuhai Guangdong China

Phone

86+7565659822

View All Listings by this Company