'LEXAN EXL1494T-NA8A005T'. Colourless, injection moulded Polycarbonate material. For use with water up to 85°C.

Section:

5210 Polycarbonate

Section Subtitle:

Material only. Components made from materials listed in this section be required to be submitted for audit tests.

WRAS Approval Number:

2312552

Expiry date:

31/12/2028

Approval Holder:

SHPP B.V.

Company Name

SHPP B.V.

Address

Plasticslaan 1, 4612PX, Bergen Op Zoom

Country

Netherlands

View All Listings by this Company

‘Tecotek OP20 BK014 01 0A QF, Tecotek OP20 GR30 BK014 01 0A QF, Tecotek OP20 GR10 BK014 01 0A QF & Tecotek OP20 GR20 BK014 01 0A QF’. Tecotek OP20 BK014 01 0A QF is a black coloured, injection moulded, unfilled PPO/HIPS material. Between February 2024 and April 2025, it was for use with water up to 23°C. Between May 2025 and February 2029, it’s for use with water up to 85°C. Tecotek OP20 GR30 BK014 01 0A QF, Tecotek OP20 GR10 BK014 01 0A QF & Tecotek OP20 GR20 BK014 01 0A QF are black coloured, injection moulded, filled PPO/HIPS materials suitable for use with water up to 85°C.

Section:

5250 Polyphenyleneoxide (PPO)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240255019

Expiry date:

28/02/2029

Approval Holder:

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Company Name

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Address

Karamehmet Mah. Avrupa Serbest Bolgesi, Avrasya Bulvari No: 8, TR 59930 Ergene

Country

Turkey

View All Listings by this Company

‘4TECH 9S20000 W-A-ABK 01 0A QF, 4TECH 9S22130 W-A-ABK, 4TECH 9S22110 W-A-ABK & 4TECH 9S22120 W-A-ABK’. Black coloured, injection moulded PPO & PPO/HIPS materials. 4TECH 9S20000 W-A-ABK 01 0A QF is an unfilled PPO material suitable for use with water up to 23°C. 4TECH 9S22130 W-A-ABK, 4TECH 9S22110 W-A-ABK & 4TECH 9S22120 W-A-ABK are filled PPO/HIPS materials suitable for use with water up to 85°C.

Section:

5250 Polyphenyleneoxide (PPO)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240255032

Expiry date:

28/02/2029

Approval Holder:

Safic-Alcan UK Ltd.

Company Name

Safic-Alcan UK Ltd.

Address

812 Fountain Court, Birchwood Boulevard, Warrington

Postcode

WA3 7QZ

View All Listings by this Company

'PTFE G439'. Terracotta coloured, extruded PTFE sealing ring. For use with water up to 85°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

240155020

Expiry date:

31/01/2029

Approval Holder:

Guarniflon SpA

Company Name

Guarniflon SpA

Address

Via T Tasso 12, 24060 Castelli Calepio (BG)

Country

Italy

Phone

+39 35 4494 311

General Email

info@guarniflon.com

View All Listings by this Company

‘METOLUX Metoset’. Site applied, grey coloured chemical anchor resin which is supplied in a pre-mixed cartridge. Apply as per manufacturer’s instructions 'version 2', dated 29.10.2023. Cure for 4 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/05/2027

Approval Holder:

Chemfix Products Ltd.

Company Name

Chemfix Products Ltd.

Address

Mill Street East, Dewsbury, West Yorkshire

Postcode

WF12 9BQ

Phone

+44(0)1924 453886

View All Listings by this Company