Screw down stop valves with brass bodies and dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

241004021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” x ½” BSP (M).

Marking:

Company logo, PN, CW617N, Size casted on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

PZG-AV-213.

Manufacturer:

Smart Copper Industrial Co. Ltd.

Company Name

Smart Copper Industrial Co. Ltd.

Address

EL‐MENOUFIA, EL‐SADAT CITY NO (78+81+82), LOCATED IN PLOT NO 4, INDUSTRIAL ZONE, EL‐SADAT CITY, Cairo

Country

Egypt

View All Listings by this Company

STAD range of balancing valves with brass bodies, PTFE sliding washer and EPDM O-rings. Models are available with or without a drain port. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

240908004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP (F x F) (DN10) – 2” BSP (F x F) (DN50).

Marking:

IMI, TA, pressure rating, size and CE marking cast on body. IMA , TA, STAD*, DN and logo located on handwheel.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Global without drain: DN10 - 52851010, DN15 - 52851015, DN20 - 52861020, DN25 - 52851025, DN32 - 52851032, DN40 - 52851040, DN50 - 52851050. Global with drain ¾”: DN10 - 52851610, DN15 - 52851615, DN20 - 52851620, DN25 - 2552851625, DN32 - 52851632, DN40 - 52851640, DN50 - 52851650. Nordic without drain: DN10 - 52851110, DN15 - 52851115, DN20 - 52851120, DN25 - 52851125, DN32 - 52851132, DN40 - 52851140, DN50 - 52851150. Nordic with drain ½”: DN10 - 52851210, DN15 - 52851215, DN20 - 52851220, DN25 - 52851225, DN32 - 52851232, DN40 - 52851240 DN50 - 52851250.

Approval Holder:

IMI international Sp. z.o.o.

Company Name

IMI international Sp. z.o.o.

Address

Olewin 50A, 32-300 Olkusz, Poland

View All Listings by this Company

Range of in-line electrolytic scale reducers with copper bodies for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 40°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm compression.

Marking:

Gaobo & WRAS on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/10/2029

Model:

7568050511 & 7568062211 (15mm compression). 7568086211 (22mm compression).

Manufacturer:

Zhejiang Gaobo Sanitary Wares Co Ltd

Company Name

Zhejiang Gaobo Sanitary Wares Co Ltd

Address

Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang

Country

China

View All Listings by this Company

‘NMSP2104 M & ER2104A01SM'. The following coatings were added to the approval in March 2025: ER2209A01SC, ER2252A01SC, ER2259A01SC & ER2260A01SC. Factory applied, blue coloured, porcelain (vitreous) enamel coatings. Apply as per manufacturer’s user manual 'PEM 38', edition '01' dated '14/10/2020'. Cure for 5 minutes@840°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

241055010

Expiry date:

31/10/2029

Approval Holder:

Colorobbia Italia S.p.A.

Company Name

Colorobbia Italia S.p.A.

Address

Via Pietramarina 53, I-50053 Sovigliana-Vinci (Firenze)

Country

Italy

View All Listings by this Company

'PRIMGREEN® ENDURANCE & Primgreen LAT 12035' primers for use with 'RILSAN® PA11 T BLUE 7444 MAC (16293), PA11 T GREY 5161 MAC (17203), PA11 T WHITE 1488 AC (17219) & PA11 T BLACK 7450 AC (17185)' coatings. Factory applied primers and powder coatings. The piece to be coated is to be pre-heated to 330°C for 10 minutes, the primer and coating applied in accordance with user instructions 'Dircom - 4418E/05.2015/20' and then cured for 10 minutes@330°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240855041

Expiry date:

31/08/2029

Approval Holder:

Arkema France

Company Name

Arkema France

Address

CERDATO, Route du Launay, 27470 Serquigny

Country

France

View All Listings by this Company