Directory Search Results

Print List

#240402068

Range of in-line ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50-200 flanged.
Marking:
Baylan on dial cover. Baylan, flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
UW-6: DN50 (port length 200mm), UW-0: DN65 (port length 200mm), UW-1: DN80 (port length 225mm), UW-2: DN100 (port length 250mm), UW-3: DN125 (port length 250mm), UW-4: DN150 (port length 300mm), UW-5: DN200 (port length 350mm).
Product Images

Approval Holder:
BAYLAN OLCU ALETLERI SAN. TICARET
Company Name
BAYLAN OLCU ALETLERI SAN. TICARET
Address
ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company
Manufacturer:
BAYLAN OLCU ALETLERI SAN. TICARET
Company Name
BAYLAN OLCU ALETLERI SAN. TICARET
Address
ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

Print This Approval


#240504018

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240504018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
THG etched on Body
Installation Requirements:
R001 R070 R415
Expiry date:
31/05/2029
Model:
G00-XXX-4270B/W. Where XXX denotes finishes and can be replaced by: A02-Polished Chrome, A13-Smoked Brass, B01-Polished Nickel, C01-Matte Nickel, C02-Matte Chrome, C27-Unlacquered Brass, C47-Smoked Nickel, D01-Light Bronze Lacquered, D05-Lacquered Matte Bronze, D10-USA Oil-Rubbed Bronze, D12-Polished Brass Lacquered, D15-Polished Black Lacquered, D16-White Lacquered, D18-Matte Black lacquered, D21-Old Oil-Rubbed Bronze, D24-Aranja, H17-Matt Aranja, F01-Polished Gold, F07-Matte Gold, F18-Rhodium Silver, F19-Matt Rhodium Silver, F27-Rose Gold, F30-Soft Gold, F31-Matte Soft Gold, F33-Brown Bronze PVD, F34-Matte Brown Bronze PVD, G01-Polished Nickel/Polished Gold, G02-Polished Chrome/Polished Gold, H03-Lacquered Antique Silver, H07-Varnished Matte Antique Red Copper, H08-Lacquered Matte Antique Silver, H24-Lacquered Antique Copper, H28-Antique Nickel, H49-Brass PVD, H50-Matte Brass PVD, H52-Gold PVD, H53-Matte Gold PVD, H55-Nickel PVD, H56-Matte Nickel PVD, H60-Matte Blush PVD, H62-Blush PVD, H64-Graphite PVD, H65-Matte Graphite PVD, H66-Umber PVD, H67-Matte Umber PVD
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#240504702

‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240504702
Note:
R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.
Size:
44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).
Marking:
Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.
Installation Requirements:
R001 R007 R009 R415
Expiry date:
31/05/2029
Model:
46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#240206701

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240206701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).
Marking:
Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
28/02/2029
Model:
1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:
Xylem Service Italia S.r.l
Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company
Manufacturer:
Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.
Company Name
Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.
Address

View All Listings by this Company

Print This Approval


#240202717

Range of multistage pumps with stainless steel bodies, impellers, shaft and outer sleeve. SC family models are submersible pumps. SCD family models are surface pumps only. SCDS family models can be used either as a surface pump or as a submersible pump. SCD/SCDS models: Maximum working pressure 10.0 bar. SC models: Open outlet use only. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240202717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SC models: Suction fed inlet x 1¼" BSP (F) outlet. SCD/SCDS models: 1¼" BSP (F) inlet/outlet.
Marking:
Xylem, Lowara, CE, model and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
28/02/2029
Model:
Model Code: XAAY/ZZ/F Where: X denotes the flow rate: This can be any digit 1 to 8. AA denotes the family code: SC (without float switch option only). SCD. SCDS (without float switch option only). Y denotes the stages: This can be any digit 2 to 9. ZZ/F: all the subsequent digits/letters are related to electrical features.

Approval Holder:
Xylem Service Italia S.r.l
Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company

Print This Approval


#240504019

Range of shower outlets, (brass bodies - various finishes), incorporating ball joints, EPDM ‘O’-rings and NBR rubber seals. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240504019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) ½” BSP (F) ¾” BSP (M) ½” BSP (M
Marking:
THG etched on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
186PR/W,286/W,288L/W,290/B/W,290/J/W,290/M/W,910PR/W & 3640/W Finishes: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#240608001

Range of wall or ceiling mounted shower outlets with plastic bodies (various finishes) and brass shower arms (various finishes, incorporating EPDM O-rings and plastic flow regulators. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240608001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products with ceiling connectors are to be installed with 24 010 180 basic set. 24 010 180 basic set is not approved in it's own right.
Size:
See models Products with ceiling connectors are to be installed with 24 010 180 basic set
Marking:
Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012). AXOR on shower plate (Models 35 274, 35 278 & 35 277).
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
24 002 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 002 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 003 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 003 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 012 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 24 013 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min - 1/2" BSP (M) 35 274 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 35 277 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector 35 278 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 24 010 180 - Hansgrohe | Rainmaker Select Basic Set - 1/2" BSP (F)

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240608002

Range of chrome plated plastic bodied or brass bodied (28 489 xxx model) overhead shower outlets. The 27 405 xxx model is supplied with a ceiling mounted shower arm and the 27 424 xxx models with a wall mounted shower arm, both are chromium plated brass. All shower outlets incorporate a combined EPDM washer and plastic strainer on the inlet. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240608002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
1/2" BSP (F)
Marking:
1/2" BSP (F)
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
27 405 xx0 - Hansgrohe | Raindance Classic 27 424 xx0 - Hansgrohe | Raindance Classic 28 474 xx0 - AXOR Montreux 28 487 xx0 - AXOR Montreux 28 489 xx0 - AXOR Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240508001

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE gaskets. Maximum working pressure 20 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSPP (ISO7/1) & NPT (ANSI B1.20.1) (F)
Marking:
Manufacturers logo, size, pressure and flow arrow cast into body.
Installation Requirements:
R001 R120
Expiry date:
31/05/2029
Model:
BV231W.

Approval Holder:
Belven NV
Company Name
Belven NV
Address
Blokhuisstraat 24, Industriepark Noord 1, B-2800 Mechelen
Country
Belgium

View All Listings by this Company

Print This Approval


#240502058

Range of electronic pressure switches housed in a plastic body with a ceramic sensor and NBR gaskets and/or ‘O’-rings. The U480015 and U480016 models incorporate a spring-loaded plastic flow restrictor. Maximum working pressure 12.0 bar. Cold water only.

Section:
1720 Switches
Section Subtitle:
Pressure operated.
WRAS Approval Number:
240502058
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
U480012/13/14/28: ¼" BSPP (F). U480015/16: 1" BSPP (M) X 1" BSPP (F) X 1" BSPP (F).
Marking:
Coelbo and product name on body. Coelbo, product name, serial number including date of manufacture (XX - YY/WWW VXX, where W13 would = week 13) and other technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
U480012 - Switchmatic 1, U480013 - Switchmatic 2, U480014 - Switchmatic 3, U480028 - Switchmatic 2T, U480015 - T-Kit - Switchmatic 1, U480016 - T-Kit - Switchmatic 2.
Product Images

Approval Holder:
COELBO CONTROL SYSTEM, S.L.
Company Name
COELBO CONTROL SYSTEM, S.L.
Address
Ctra. De Rubí, 288 Terrassa
Postcode
08228
Country
Spain
General Email
jcanizares@coelbo.es

View All Listings by this Company
Manufacturer:
COELBO CONTROL SYSTEM, S.L.
Company Name
COELBO CONTROL SYSTEM, S.L.
Address
Ctra. De Rubí, 288 Terrassa
Postcode
08228
Country
Spain
General Email
jcanizares@coelbo.es

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 508 of 789

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.