Directory Search Results

Print List

#250102013

Single hole, single outlet, fixed, combination tap assembly (chromium plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250102013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The product is supplied with a lever type pop up waste – not verified by test.
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections. Supplied with 15mm compression x 3/8" BSP male inlet adapters.
Marking:
Ideal Standard on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2030
Model:
BC340AA
Product Images

Manufacturer:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250102014

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes) incorporating a ceramic cartridge headworks with single lever operating members. Model 24.341.xxx is supplied with lever operated pop up waste (not verified by test). Maximum working pressure 10 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250102014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.
Marking:
Grohe SPA logo on front of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2030
Model:
24.341.xxx 24.342.xxx Xxx denotes finish: 000 – chrome DC0 – supersteel AL0 – brushed hard graphite
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250102042

Range of single-hole, single outlet, (fixed) combination tap assemblies (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250102042
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Polymeric braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
MAIN PLAN on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2030
Model:
154932899 154932299 158132899 158132299 166432899 166432299
Product Images

Approval Holder:
Main Plan Limited
Company Name
Main Plan Limited
Address
9/F Yau Lee Centre 45 Hoi Yuen Road Kwun Tong
Country
Kowloon
Phone
(852) 2698 9233

View All Listings by this Company

Print This Approval


#2306093

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The product is supplied with 3/8” x 15mm reducers incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is to be used with an instantaneous water heater. Maximum working pressure: 10.0 bar Maximum operating temperature: 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2306093
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010 R150 R170
Expiry date:
30/06/2028
Model:
74806xxx – Zesis M33 – Single lever kitchen mixer 150, LowPressure/vented hot water cylinders, 1jet

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2306094

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Products incorporate an additional hose outlet and shut-off valve for use with an external domestic appliance. Maximum working pressure: 10.0 bar Maximum operating temperature: 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2306094
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2028
Model:
74807xxx – Zesis M33 – Single lever kitchen mixer 200, device shut-off valve, CoolStart, 1jet 74808xxx – Zesis M33 – Single lever kitchen mixer 200, device shut-off valve, 1jet

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2306045

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure: 10.0 bar Maximum operating temperature: 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2306045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2028
Model:
74802xxx – Zesis M33 – Single lever kitchen mixer 150, 1jet 74811xxx – Zesis M33 – Single lever kitchen mixer 150, Eco, 1jet 74813xxx – Zesis M33 – Single lever kitchen mixer 150, CoolStart, EcoSmart, 1jet 74815xxx – Zesis Lean M34 – Single lever kitchen mixer 150, 1jet

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250102051

Range of single hole, single outlet (swivel) pull out spray combination tap assemblies (brass bodies – various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250102051
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hoses with 1/2" BSP Captive nut end connections.
Marking:
LOTA on body of tap
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/01/2030
Model:
63798-00X means different finishes as 0111:Trivalent chromium plating, 6801:Matt Black, 4408(the copper plating will be applied to the base body firstly and then final finish matt black) : Brushed Brass, 08:Stainless Steel, 5806:Titanium, 0402:Brushed Nickel PVD, 04:Brushed Nickel, 5804:gun metal
Product Images

Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China

View All Listings by this Company

Print This Approval


#250704003

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250704003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
ELSMBK, ELSMCP, MASMCP, INST-MCF-1HKM, INST-MCP-1HKM, INSMCSKMMB - DTC25 on rear and Methven on front body MDL104 - DTC25 on rear and Deva on front body
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2030
Model:
ELSMBK ELSMCP MASMCP INST-MCF-1HKM INST-MCP-1HKM MDL104 Model added June 2025 INSMCSKMMB

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#241102078

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate an aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241102078
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
JTP on wall plate
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2029
Model:
55273EX 23273BBR 27273BBL 28273MB 21273BRZ DH55273EX DH23273BBR DH27273BBL DH28273MB DH21273BRZ 55273 23273BBRMP 27273BBLMP 28273MBMP 21273BRZMP DH55273 DH23273BBRMP DH27273BBLMP DH28273MBMP DH21273BRZMP 55273SP 23273BBRSP 27273BBLSP 28273MBSP 21273BRZSP DH55273SP DH23273BBRSP DH27273BBLSP DH28273MBSP DH21273BRZSP 64273CHMP 63273BBRMP 67273BBLMP 68273MBMP 61273BRZMP LH64273CHMP LH63273BBRMP LH67273BBLMP LH68273MBMP LH61273BRZMP IX092 IX091 86231 FOR273 32231 33231BBR 37231BBL 38231MB 31231BRZ 32273 33273BBR 37273BBL 38273MB 31273BRZ

Approval Holder:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Innovia House, Marish Wharf, St Mary's Rd, Langley
Postcode
SL3 6DA
Country
Berkshire
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#240902083

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure; 10 Bar Maximum operating temperature 65°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240902083
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Scudo on faceplate
Installation Requirements:
R001 R010
Expiry date:
30/09/2029
Model:
KO‐004 KO‐024 KO‐014 KO‐034

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 505 of 620

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.