Directory Search Results

Print List

#2202549

'EWDRI 50, EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 0.69mm. 'EWDRI 50' is for use with water up to 70°C. 'EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80' are for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2202549
Expiry date:
28/02/2027

Approval Holder:
Deesawala Rubber Industries
Company Name
Deesawala Rubber Industries
Address
5-5-65/S12A, S.A. Trade Centre, Ranigunj 'X' Road, Secunderabad, Pin-500003, Telengana
Country
India

View All Listings by this Company

Print This Approval


#2204506

'EUW-60'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 0.9mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204506
Expiry date:
30/04/2027

Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval


#2111540

'Phardite D31'. Brown coloured, extruded hard/natural rubber material. Shore hardness 78. Tested in-radius size 0.9mm. For use with water up to 23°C.

Section:
5380 Rubbers
Section Subtitle:
Natural or Isoprene - material only.
WRAS Approval Number:
2111540
Expiry date:
31/10/2026

Approval Holder:
Burkert SAS
Company Name
Burkert SAS
Address
20 rue du Giessen, 67220 Triembach au Val
Country
France

View All Listings by this Company

Print This Approval


#2203521

'Loctite® AA 326 with Loctite® SF 7649™ Activator'. Loctite® AA 326 is an amber coloured, liquid anaerobic adhesive and Loctite® SF 7649™ is a green coloured, liquid activator. Apply as per manufacturer's Technical Data Sheet dated December 2013. Cure 7 days@22°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2203521
Expiry date:
31/03/2027

Approval Holder:
Henkel Ltd.
Company Name
Henkel Ltd.
Address
Technologies House, Wood Lane End, Hemel Hempstead
Postcode
HP2 4RQ
Country
Herts
Phone
+44 1442 278 100
General Email
loctite.connect@henkel.com

View All Listings by this Company

Print This Approval


#2203362

Range of wall mounted electric showers (various finishes). The GSD/BETTER models incorporate a solenoid valve controlling the flow, which includes a combined plastic and stainless steel strainer and a plastic flow regulator on its inlet. The GSM/DSK/ENTRY models incorporate a manually operated push button valve controlling the flow and plastic strainer on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:
1361 Heaters
Section Subtitle:
Electric Shower
WRAS Approval Number:
2203362
Size:
15mm plastic pipe.
Marking:
E-tec, model, address and other technical information on adhesive label on bottom panel.
Installation Requirements:
R001 R040
Expiry date:
31/03/2027
Model:
GSMxx. DSKxxT. GSDxx. GSDPBxx. GSDTGxx. Models added January 2024: ENTRYXX. BETTERXX. Where xx denotes kW rating: 75 (7.5kw), 85 (8.5kW), 95 (9.5kW) and 105 (10.5kW). All models are white finish, except for GSDPB = piano black, and GSDTG = titanium grey.
Product Images

Approval Holder:
Xiamen E-Tec Electric Shower Co., LTD
Company Name
Xiamen E-Tec Electric Shower Co., LTD
Address
No.11, HaiJing East 2nd Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone.

View All Listings by this Company

Print This Approval


#2203367

Range of wall mounted electric showers (various finishes). Incorporate a manually operated push button valve controlling the flow and plastic strainer on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:
1361 Heaters
Section Subtitle:
Electric Shower
WRAS Approval Number:
2203367
Size:
15mm plastic pipe.
Marking:
Comfee, model, address and other technical information on adhesive label on bottom panel. Comfee on front of body
Installation Requirements:
R001 R040
Expiry date:
31/03/2027
Model:
DSKxxT. Where xx denotes kW rating: 75 (7.5kw), 85 (8.5kW), 95 (9.5kW) and 105 (10.5kW). All models are white finish

Approval Holder:
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Company Name
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Address
East Road Wanchun, East Area Economic & Technological Development Area Wuhu City P.R.
Country
China

View All Listings by this Company

Print This Approval


#2203368

Range of wall mounted electric showers (various finishes). The GSD models incorporate a solenoid valve controlling the flow, which includes a combined plastic and stainless steel strainer and a plastic flow regulator on its inlet. The GSM/ models incorporate a manually operated push button valve controlling the flow and plastic strainer on the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:
1361 Heaters
Section Subtitle:
Electric Shower
WRAS Approval Number:
2203368
Size:
15mm plastic pipe.
Marking:
Gainsborough, Aqualisa and company details, model, address and other technical information on adhesive label on bottom panel. Gainsborough (Part of the Aqualisa Group) on front of body
Installation Requirements:
R001 R040
Expiry date:
31/03/2027
Model:
GSMxx. GSDxx. GSDPBxx. GSDTGxx. Where xx denotes kW rating: 75 (7.5kw), 85 (8.5kW), 95 (9.5kW) and 105 (10.5kW). All models are white finish, except for GSDPB = piano black, and GSDTG = titanium grey.
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2201325

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass or stainless steel bodies). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2201325
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (a Dolphin) on body.
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
DS120 Series InForm SMART taps DSaaa.bbb.c.dd Where ‘aaa’ denotes the mounting type and can be replaced with: DS121 - thru panel mounted DS122 - wall plate mounted Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm: Range 100mm - 275mm in 25mm increments Where ‘c’ denotes the material finish and can be replace with: 1 - brushed/satin 2 - mirror polished 3 - PVD on brushed/satin 4 - PVD on mirror polished 5 - powder coated (PC) Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Product Images

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2203324

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly with stainless steel body. The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet incorporates a flow regulator and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2203324
Size:
Control box: ½” BSP (M). Tap: Stainless steel braided PEX lined hose with ½” BSP captive nut end connections
Marking:
“Initial” on front of control unit Company name, address, year of manufacturer (YYYY) and other technical information on rear of control unit.
Installation Requirements:
R001 R007 R040 R557
Expiry date:
31/03/2027
Model:
573671
Product Images

Approval Holder:
Rentokil Initial 1927 plc
Company Name
Rentokil Initial 1927 plc
Address
Compass House Manor Royal Crawley West Sussex
Postcode
RH10 9PY
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dudley Industries Ltd
Company Name
Dudley Industries Ltd
Address
Preston Road Lytham Lancashire
Postcode
FY8 5AT

View All Listings by this Company

Print This Approval


#2203351

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated via an infra-red sensor either battery or power supply. The product incorporates a manual temperature control operated by a single lever on the side of the body. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2203351
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010 R570
Expiry date:
31/03/2027
Model:
59511 xx1100 59512 xx1100 Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. 37 – black matt
Product Images

Approval Holder:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2203352

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly with stainless steel body. The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2203352
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
“Initial” on front of control unit Company name, address, year of manufacturer (YYYY), contry of manufacturer, Model number and CE marking on rear of control unit.
Installation Requirements:
R001 R006 R009 R557
Expiry date:
31/03/2027
Model:
573672
Product Images

Approval Holder:
Rentokil Initial 1927 plc
Company Name
Rentokil Initial 1927 plc
Address
Compass House Manor Royal Crawley West Sussex
Postcode
RH10 9PY
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dudley Industries Ltd
Company Name
Dudley Industries Ltd
Address
Preston Road Lytham Lancashire
Postcode
FY8 5AT

View All Listings by this Company

Print This Approval


#2011108

Range of wall mounted, two hole, single outlet (fixed) battery controlled tap assemblies (chromium plated brass) incorporating approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection .The flow is controlled via a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The tap is supplied with spherical valves for both hot and cold inlets. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2011108
Size:
½” Male BSP.
Marking:
TWYFORD on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
Battery Operated: SF1130CP – Removable Spout SF1129CP
Product Images

Approval Holder:
Twyford Geberit Group
Company Name
Twyford Geberit Group
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926 516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company
Manufacturer:
Twyford Geberit Group
Company Name
Twyford Geberit Group
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926 516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2201033

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Incorporating a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201033
Size:
½” BSP (M).
Marking:
Geberit on cistern and operating members. 6 litre mark in cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2027
Model:
Geberit Sigma 12cm concealed cistern 6/3 litres and Duofix wall frames: 109.309.00.5 Cistern only with push fit flush pipe, 111.352.00.5 Wall frame with cistern H112cm, less abled installation, 111.384.00.5 Wall frame with cistern H112cm, 111.383.00.5 Wall frame with cistern H112cm, wall anchors & connection bend, 111.911.00.5 Wall frame with cistern H98cm, wall anchors & connection bend. Models added July 2023: 111.383.00.3, 111.911.00.3.
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2203336

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203336
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm 9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm 9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm 9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm 9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm 9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. 9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm 9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added February 2023 9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm
Product Images

Approval Holder:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company
Manufacturer:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company

Print This Approval


#2101075

Range of in-line, non-verifiable single check valve assemblies with DZR brass bodies and spring loaded, resilient trim check valve cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2101075
Size:
15, 22, 28 mm compression
Marking:
CPS, CR, Size and Flow Arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
218172 (15mm compression), 994451 (22mm compression), 994452 (28mm compression),

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2204022

Range of Caprice assisted baths which include a choice of with or without a hoist. Flow is controlled via a thermostatic mixing valve supplying the bath spout outlet or shower handset. The discharge from the bath spout and shower handset in via a type AUK 3 airgap, verified by measurement, suitable for Fluid Category 5 backflow protection Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 46°C

Section:
0055 Baths
Section Subtitle:
Assisted Bathing Units
WRAS Approval Number:
2204022
Note:
The inlets to the thermostatic mixing valve incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, therefore IRN 010 applies.
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 22mm push-fit end connections.
Marking:
Reval, model number, product info on label of leg. Reval on front panel.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
Caprice fixed height bath without hoist 7100.0GS70R – Caprice fixed height bath L/H model 172cm length 7100.0DS70R – Caprice fixed height bath R/H model 172cm length 7100.0GS90R – Caprice fixed height bath L/H model 192cm length 7100.0DS90R – Caprice fixed height bath R/H model 192cm length Caprice variable height bath without hoist 7100.1GS70R – Caprice variable height bath L/H model 172cm length 7100.1DS70R – Caprice variable height bath R/H model 172cm length 7100.1GS90R – Caprice variable height bath L/H model 192cm length 7100.1DS90R – Caprice variable height bath R/H model 192cm length Caprice variable height bath with hoist 7100.1GS71R – Caprice variable height bath with hoist L/H model 172cm length 7100.1DS71R – Caprice variable height bath with hoist R/H model 172cm length 7100.1GS91R – Caprice variable height bath with hoist L/H model 192cm length 7100.1DS91R 0 Caprice variable height bath with hoist R/H model 192cm length
Product Images

Approval Holder:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company
Manufacturer:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company

Print This Approval


#2206346

Range of ceramic disc diverter headworks with or without a on/off function, to be installed in specifically dimensioned bores. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2206346
Size:
See models
Marking:
Glamour logo (GLMO) on body
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
GD30F‐*, with on/off function: 29.29mmØ Note: The ‘*’ denotes the color of housing, which is not in contact with water. CW‐Creamy White BL‐Blue RE‐Red YE‐Yellow WH‐White GR‐Gray DG‐Dark Grey BK‐Black GD22F‐**:21.81mm Ø GD25F‐**:25.76mm Ø GD35F‐**: 33mm Ø GD40F‐**, with on/off function: 38mm Ø Note: The first ‘*’ denotes the color of housing GR‐Gray PPE BK‐Black polyarylamide BA‐Black PPS The second “*’ denotes the length of stem For GD22F is 10‐30, means 10‐30mm For GD25F is 10‐75, means 10‐75mm For GD35F is 10‐90, means 10‐90mm For GD40F is 10‐60, means 10‐60mm
Product Images

Approval Holder:
Kaiping Glamour Tap Component Co. Ltd.
Company Name
Kaiping Glamour Tap Component Co. Ltd.
Address
Building D2, No. 1, 2nd Xihu Road, Cuishanhu New District
Country
Kaiping City,

View All Listings by this Company
Manufacturer:
Kaiping Glamour Tap Component Co. Ltd.
Company Name
Kaiping Glamour Tap Component Co. Ltd.
Address
Building D2, No. 1, 2nd Xihu Road, Cuishanhu New District
Country
Kaiping City,

View All Listings by this Company

Print This Approval


#2107033

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with either a single lever or dome type operating member (see model). The spout outlet incorporates a plastic aerator (specific models only - see model section). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107033
Size:
M10
Marking:
QIXI and WRAS on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2026
Model:
Cartridge, Single Lever & Aerator: SH-T8002AW, SH-T8002L, SH-T8002LN, SH-T8012W, SH-T8012L, SH-T8012LN, SH-T8092W, SH-T8172W, SH-T8172NW, SH-T8172L, SH-T8182NW, SH-T8182AMW, SH-T8202NW, SH-T8202MW, SH-T8202L, SH-T8492MW, SH-T8532W, SH-T8682W, SH-T8682L, SH-T8552W, SH-T8552MW, SH-T8582MW, SH-T8622W, SH-T8712AW, SH-T8812MW, SH-T8812L, SH-T8842MW, SH-T8922MW, SH-T8982W, SH-T8982MW, SH-T9022W, SH-T9022MW, SH-T9052MW, SH-T9072W, SH-T9072MW, SH-T9162W, SH-T9162MW, SH-T9202W, SH-T9272W, SH-T9272NW, SH-T9282W, SH-T9282NW, SH-T9302W. Cartridge, Single Lever & no aerator: SH-T8242W, SH-T8322NW, SH-T8322MW, SH-T8322L, SH-T8542MW, SH-T8882W, SH-T8882AW, SH-T8882AMW, SH-T9122W, SH-T9122MW. Cartridge, Dome Type & no aerator: SH-T9182W, SH-T9182MW.
Product Images

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval


#2204085

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes). Model A05406 has a non-rising spindle headwork with cross top operating members. All other models have a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204085
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.
Marking:
Nabis on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
A05414, A05425, A05426, A05408, A05409, A05401, A05406 & A05433 combination tap assemblies
Product Images

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2107119

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a waterfall type with or without a stainless-steel mesh (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107119
Size:
M10
Marking:
QIXI and WRAS on rear of body
Installation Requirements:
R001 R006 R160
Expiry date:
31/07/2026
Model:
Waterfall with Mesh: SH-T8112W, SH-T8112L, SH-T8412AW, SH-T8612CW, SH-T8612AMW, SH-T8612AL, SH-T8612W, SH-T8612L, SH-T8642AW, SH-T8852W, SH-T8852MW, SH-T8942W. Waterfall without Mesh: SH-T8772W, SH-T8772NW, SH-T8772L, SH-T8772AW, SH-T8772AMW, SH-T8772AL.

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 51 of 214

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.