Combination Tap Assemblies

Section Code 0445 : Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

Back To Directory Sections

#2201353

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2201353
Size:
Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Clearwater on body.
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/01/2027
Model:
KAR20WH White Pull out Kitchen mixer

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company

Print This Approval


#241102089

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating a quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a pull-out spray type. The inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
241102089
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Clearwater on rear of tap body.
Installation Requirements:
R001 R009 R090
Expiry date:
30/11/2029
Model:
LOR20CP=Chrome LOR20BN=Brushed Nickle LOR20BB=Brushed Brass LOR20MB=Matta Black LOR20WH=White .

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company

Print This Approval


#251204001

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). incorporating a ceramic cartridge and single lever operating member with a spring loaded, pull down trigger operated spray. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
251204001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Captive nut (F).
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body.
Installation Requirements:
R001 R090
Expiry date:
31/12/2030
Model:
SLINKY218, SPR104.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2311378

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2311378
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)
Marking:
WIX on Body
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2028
Model:
173904 Loose Coil Tap Brushed 137040BN

Approval Holder:
Wickes PLC
Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company

Print This Approval


#2311379

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2311379
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
Marking:
WIX on Body
Installation Requirements:
R001 R090
Expiry date:
30/11/2028
Model:
170100 Simeto Mono Mixer 311150 Simeto Monobloc Pull out Kitchen Mixer Chrome

Approval Holder:
Wickes PLC
Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company

Print This Approval


#2201356

Single hole, single outlet (swivel) combination tap assembly with white finish brass body), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2201356
Size:
Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Clearwater on body.
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/01/2027
Model:
ALA30WH White Pull out Kitchen mixer

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company

Print This Approval


#250612003

Single hole, single outlet (swivel) pull down spray combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250612003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Rangemaster on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2030
Model:
PRO SPRAY SINGLE LEVER PULL-OUT TAP: TPROSLPOCM/

Approval Holder:
AGA Rangemaster Ltd
Company Name
AGA Rangemaster Ltd
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD
Phone
+44 (0) 115 946 4000
General Email
info@agarangemaster.co.uk

View All Listings by this Company

Print This Approval


#250814303

Kisdon range of single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The outlet of the pull-out spray incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250814303
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP
Marking:
WIX on tap body
Installation Requirements:
R001 R090
Expiry date:
31/08/2030
Model:
170099 311142 313077 313078 313079 313087

Approval Holder:
Wickes PLC
Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company

Print This Approval


#260112001

Range of single hole, single outlet (swivel) combination taps assemblies (brass bodies - various finishes, see model) incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a pull-down spray outlet with plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
260112001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
LOTA on body.
Installation Requirements:
R001 R009 R090
Expiry date:
31/01/2031
Model:
62933-00X, 62933-01X. X denotes finish and can be replaced with: 01 - Chrome, 0111 - Chrome 3+, 6801 - Matt Black, 4408 - Brushed Brass, 08 - Stainless Steel, 5806 - Titanium, 0402 - Brushed Nickel PVD, 04 - Brushed Nickel, 5804 - Gun Metal.

Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#260112003

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model) with a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The cold inlet includes a loose chrome plated brass adaptor ½” BSP (M) x ½” BSP (F) incorporating an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The pull-out spray handset also incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
260112003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections + ½” BSP (F) on cold inlet (to adaptor).
Marking:
Lota on body.
Installation Requirements:
R001 R009 R090
Expiry date:
31/01/2031
Model:
63268-00X. X denotes finish and can be replaced with: 01 - Chrome, 0111 - Chrome 3+, 6801 - Matt Black, 4408 - Brushed Brass, 08 - Stainless Steel, 5806 - Titanium, 0402 - Brushed Nickel PVD, 04 - Brushed Nickel, 5804 - Gun Metal.

Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#250912010

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) with a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The pull-out spray hose connector incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250912010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on body.
Installation Requirements:
R001 R009 R090
Expiry date:
30/09/2030
Model:
63852-00X, 63855-00X. X denotes finish and can be replaced with: 0111 - Chrome 3+, 6801 - Matt Black, 4408 - Brushed Brass, 08 - Stainless Steel, 5806 - Gun Metal, 0402 - Brushed Nickel PVD., 04 - Brushed Nickel.

Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#250913701

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The cold inlet and shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250913701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
SMR on rear of tap.
Installation Requirements:
R001 R090
Expiry date:
30/09/2030
Model:
LOG ECO PULLOUT

Approval Holder:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#250912058

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) with a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The pull-out spray hose connector incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250912058
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Abode on body.
Installation Requirements:
R001 R009 R090
Expiry date:
30/09/2030
Model:
ACT3073 ACT3074 ACT3075 ACT3082 ACT3076 ACT3087 ACT3088 ACT3089 ACT3122 ACT3090

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

Print This Approval


#251102703

Single hole, single outlet (swivel) pull down spray combination tap assembly (chromium plated brass body) with a ceramic cartridge headwork and single lever operating member. The product incorporates a pull-down spray with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
251102703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless Steel and polyamide braided PEX lined flexible hose assemblies incorporating 1/2" BSP captive nut end connections.
Marking:
Grohe logo on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030
Model:
30.648.xxx Where xx1 denotes finish, can be replaced by: 001 – Chrome

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250913702

Single hole, single outlet (swivel) combination tap assembly with brass body (chromium plated), incorporating a ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a pull-out spray with plastic aerator. The cold inlet and shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250913702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
Abode on operating member.
Installation Requirements:
R001 R090
Expiry date:
30/09/2030
Model:
LOGIK SINGLE LEVER PULL OUT

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

Print This Approval


#251215901

Section:
0445 Combination Tap Assemblies
Description:
A Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
Deck Mounted Stainless steel braided PEX lined inlet hoses Undefinable Air Gap - See IRN's
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
2720067Chromed1/2" Captive nut10 bar60 °CMVIBodyNoCeramic cartridgeC-plateAerator

Approval Holder:
MVI Hazel Ltd.
Company Name
MVI Hazel Ltd.
Address
1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Print This Approval


#251002708

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies incorporating a ceramic cartridge headwork with a various operating member. The product incorporates a pull-out spout with a plastic aerator. Maximum working pressure 6 Bar Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
251002708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
⅜” BSP (F).
Marking:
Waterworks on escutcheon
Installation Requirements:
R001 R009 R090
Expiry date:
31/10/2030
Model:
BKM1ZZX BKM1ZZX Where: ZZ = handle components. 0 - Less Handles, 1 - Cross Handle, 2 - Two‐Tone Cross Handle, 3 - Coin Edge Cross Handle, 10 - Solo Series Lever Handle, 11 - Lever Handle, 12 - Two‐Tone Lever Handle, 13 - Coin Edge Lever Handle, 14 - Walnut Lever Handle, 15 - Leather Lever Handle, 20 - Solo Series Straight Lever Handle, 2A - Tandem Series Guilloche Lines Lever Handle, 2B - Tandem Series Two‐Tone Lever Handle, 2C - Union Series Guilloche Link Lever Handle, 2D - Union Series Enamel Guilloche Lines Lever Handle, 2E - Union Series Guilloche Pinstripe Lever Handle, 2P - Solo Series Two‐Piece Straight Lever Handle, 2S - Bond Rally Series Lever Handle, 2T - Teak Lever Handle, 30 - Solo Series Knob Handle, 3S - Bond Rally Series Knob Handle, 4A - Tandem Series Guilloche Lines Knob Handle, 4B - Tandem Series Two‐Tone Guilloche Knob Handle, 4D - Union Series Enamel Guilloche Lines Knob Handle, 5C - Union Series Guilloche Link Knob Handle, 7A - Tandem Series Guiloche Lines Lever handles with Gland Cover, 7B - Tandem Series Two Tone Lever handles with Gland Cover, 7C - Union Series Guiloche Link Lever handles with Gland Cover, 7D - Union Series Enamel Guiloche Lines Lever handles with Gland Cover, 7E - Union Series Guiloche Pinstripe Lever handles with Gland Cover, 7P - Solo Series Two Piece Straight Lever handle with Gland Cover, 7S - Bond Rally Series Lever Handle With Gland Cover, 7T - Tandem Series Teak lever with Gland Cover, 8Z - Straight Lever Handle, 90 - Solo Series Straight Lever handles with Gland Cover. X = External Color or Finish Options: AC - Antique Copper, AB - Architectural Bronze, AQB - Antique Brass, BZ - Architectural Bronze, C - Polished Chrome, CO - Concordia, DN - Dark Nickel, G - Gold, L - Lumin, M - Matte Nickel, MC - Matte Chrome, MG - Matte Gold, MS - Matte Silver, N - Polished Nickel, S - Silver, SC - Shiny Copper, SO - Sovereign, UB - Unlacquered Brass.

Approval Holder:
Waterworks
Company Name
Waterworks
Address
10 John Street London
Postcode
WC1N2EB
Country
United Kingdom

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 6

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.