In-line, Y-patterned strainer with stainless steel body and EPDM ‘O’-ring. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1715 Strainers

Size:

3/8” BSP (M) x 3/8” BSP (M)

Marking:

iMist, PN, model, size and flow arrow on body.

Expiry date:

31/01/2026

Model:

STS 12 430

Product Images

Approval Holder:

iMist Holdings Ltd.

Company Name

iMist Holdings Ltd.

Address

Unit 293, National Avenue Hull

Postcode

HU5 4JB

View All Listings by this Company

Manufacturer:

iMist Holdings Ltd.

Company Name

iMist Holdings Ltd.

Address

Unit 293, National Avenue Hull

Postcode

HU5 4JB

View All Listings by this Company

Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2102701

Size:

See model.

Marking:

ZELB250445 model: RWC, CR and size on body. ZELB250446 model added July 2022: RWC, CR, size and BS2879 on body.

Installation Requirements:

R001 R511

Expiry date:

28/02/2026

Model:

ZELB250445: 22mm compression x ¾” BSP (M). Model added July 2022: ZELB250446 model: 28mm compression x 1” BSP (M).

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of stainless steel braided PE-X lined flexible hose assemblies incorporating NBR washers and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012020

Size:

See model.

Marking:

Finial Plumbing logo (I>J), date of manufacture (YYYY), WRAS and DN size on ferrule.

Installation Requirements:

R001 R008

Expiry date:

31/12/2025

Model:

DN8 bore: Finial-DN8-01 - Stainless steel braided PEX hose F3/8*M3/8 (DN8) 10~200cm: ⅜” BSP (F) x ⅜” BSP (M). Finial-DN8-02 - Stainless steel braided PEX hose F3/8*M10x1 (DN8) 10~200cm: ⅜” BSP (F) x M10. Finial-DN8-03 - Stainless steel braided PEX hose F1/2*M1/2 (DN8) 10~200cm: ½” BSP (F) x ½” BSP (M). Finial-DN8-04 - Stainless steel braided PEX hose F1/2*M10x1 (DN8) 10~200cm: ½” BSP (F) x M10. Finial-DN8-05 - Stainless steel braided PEX hose F1/2*F1/2 (DN8) 10~200cm: ½” BSP (F) x ½” BSP (F). Finial-DN8-06 - Stainless steel braided PEX hose F1/2*M12x1 (DN8) 10~200cm: ½” BSP (F) x M12. Finial-DN8-07 - Stainless steel braided PEX hose F1/2*M15x1 (DN8) 10~200cm: ½” BSP (F) x M15. Finial-DN8-08 - Stainless steel braided PEX hose F3/8*F1/2 (DN8) 10~200cm: ⅜” BSP (F) x ½” BSP (F). Finial-DN8-09 - Stainless steel braided PEX hose 15mm compression*M10x1 (DN8) 10~200cm: 15mm compression x M10. Finial-DN8-10 - Stainless steel braided PEX hose 15mm compression*M12x1 (DN8) 10~200cm: 15mm compression x M12. DN10 bore: Finial-DN10-01 - Stainless steel braided PEX hose F1/2*F1/2 (DN10) 10~200cm: ½” BSP (F) x ½” BSP (F). Finial-DN10-02 - Stainless steel braided PEX hose F1/2*M12x1 (DN10) 10~200cm: ½” BSP (F) x M12. Finial-DN10-03 - Stainless steel braided PEX hose F1/2*M1/2 (DN10) 10~200cm: ½” BSP (F) x ½” BSP (M). Finial-DN10-04 - Stainless steel braided PEX hose F3/4*F3/4 (DN10) 10~200cm: ¾” BSP (F) x ¾” BSP (F). All hoses are available in lengths of 10 to 200cm.

Approval Holder:

Finial Plumbing Co., Ltd.

Company Name

Finial Plumbing Co., Ltd.

Address

No 36-38, Siqian Development Zone, Shuikou Town, Kaiping City

Country

Guangdong Province,

Phone

86-750-2729525

General Email

info@dingjian.tw.cn

View All Listings by this Company

Manufacturer:

Finial Plumbing Co., Ltd.

Company Name

Finial Plumbing Co., Ltd.

Address

No 36-38, Siqian Development Zone, Shuikou Town, Kaiping City

Country

Guangdong Province,

Phone

86-750-2729525

General Email

info@dingjian.tw.cn

View All Listings by this Company

Range of stainless steel braided EPDM lined hose assemblies with EPDM O-rings and some models incorporate a servicing valve. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2012032

Size:

SEE MODEL

Marking:

GCE, WRAS, size and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

DN17) HD125A/15W: 300mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD225A/15W: S00mmx 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD325A/15W: 1000mmxl/2" BSP Captive Nut x 15mm Push Fit (DN17) HD425A/15W: 150mm 1/2" BSP Captive Nut x 15mm Push Fit (DN17) HD125B / 22W: 300mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD225B / 22W: 500mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN17) HD325B / 22W: 1000mm x 1/2" BSP Captive Nut x 22mm Push Fit (DN13) HD125G / 15W: 300mm M12 x 15mm Push fit Monobloc (DN17) HD125H / 300mm x 15W 15mm Push Fit X 15mm Push Fit (DN17) HD225H / 500mm x 15W 15mm Push Fit X 15mm Push Fit (DN13) HD125F/15W: 300mm M10 x 15mm Push fit Monobloc (DN17) HD125H/22W:300mm22mm Push fit 22mm Push fit (DN17) HD225H/22W:500mm 22mm Push fit 22mm Push fit (DN17) HD125D/15W: 15mm Push fit x 1/2" BSP Captive Nut Elbow (DN17) HDW125E/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HDW225E/15W: 500mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve (DN17) HD125EH/15W: 300mm x 1/2" BSP Captive Nut x 15mm Push fit Service Valve Handle

Approval Holder:

Wavin UK

Company Name

Wavin UK

Address

Hazelhead Crow Edge Sheffield

Postcode

S36 4HG

View All Listings by this Company

Range of stainless steel or ACB braided, PE-RT lined flexible hose assemblies, incorporating various end connections. The 15mm & 22mm compression models may incorporate an isolation valve. The 15mm pushfit incorporates an isolation valve. Models added April 2022 have a maximum operating pressure of 6.0 bar, a maximum operating temperature of 65°C and are for use with copper pipe manufactured to BS EN 1057. All other models have a maximum operating pressure of 10.0 bar and a maximum operating temperature of 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2101301

Size:

Please refer to model.

Marking:

Tucai, WRAS, date of manufacture (YY), production location (NT or TB) on crimped connector. Models added December 2024: Tucai Logo, WRAS, date of manufacture (YY), production location (NT or TB) on crimped connector.

Installation Requirements:

R001 R008

Expiry date:

31/01/2026

Model:

‘Anti-Corrosion’ braided range comprising of: TWIST ACB: Hose bore = DN8. End connections = M8x1, M10x1, M12x1, 3/8 " Captive Nut, 1/2" Captive Nut, 3/8" BSP, 1/2" BSP, Compression fitting 10mm, Compression fitting 12mm, Compression fitting 15mm, Pipe end 10mm, Pipe end 15mm, 3/8" elbow nut, 1/2" elbow nut, M15X1, M15X1 Captive nut, Clip 10, Clip 11. FORTE TWIST ACB: Hose bore = DN10. End connections = M10x1, M12x1, 3/8 " Captive Nut, 1/2" Captive Nut, 3/4” Captive Nut, 1/2" BSP, 3/4" BSP, Compression fitting 10mm, Compression fitting 15mm, Compression fitting 15mm w/valve, 1/2" elbow nut, pushfitting 15, 3/4” elbow nut. SUPER TWIST ACB: Hose bore = DN13. End connections = 1/2" Captive Nut, 3/4” Captive Nut, 1/2" BSP, 3/4" BSP, Compression fitting 15mm, Compression fitting 22mm, Compression fitting 22mm w/valve, M12X1, 3/4" elbow nut, Pipe end 22mm. Stainless-steel braided range comprising of: TWIST: Hose bore = DN8. End connections = M8x1, M10x1, M12x1, 3/8 " Captive Nut, 1/2" Captive Nut, 3/8" BSP, 1/2" BSP, Compression fitting 10mm, Compression fitting 12mm, Compression fitting 15mm, Pipe end 10mm, Pipe end 15mm, 3/8" elbow nut, 1/2" elbow nut, M15X1, M15X1 Captive nut, Clip 10, Clip 11. FORTE TWIST: Hose bore = DN10. End connections= M10x1, M12x1, 3/8 " Captive Nut, 1/2" Captive Nut, 3/4” Captive Nut, 1/2" BSP, 3/4" BSP, Compression fitting 10mm, Compression fitting 15mm, Compression fitting 15mm w/valve, 1/2" elbow nut, pushfitting 15, 3/4" elbow nut. SUPER TWIST: Hose bore = DN13. End connections= 1/2" Captive Nut, 3/4” Captive Nut, 1/2" BSP, 3/4" BSP, Compression fitting 15mm, Compression fitting 22mm, Compression fitting 22mm w/valve, M12X1, 3/4" elbow nut, Pipe end 22mm Models added April 2022 FORTE TWIST ACB // FORTE TWIST Hose bore = DN10. End connection = 15mm pushfit. SUPER TWIST ACB // SUPER TWIST Hose bore = DN13. End connection = 22mm pushfit. Models added December 2024: Twist ACB DN8 hose with ‘Y’ connector ¾”x ½” captive nut end connections was added to the approval.

Product Images

Approval Holder:

Tucai, S.A.

Company Name

Tucai, S.A.

Address

Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)

Country

Spain

Phone

+34 93 718 95 62

General Email

info@tucai.com

View All Listings by this Company

Manufacturer:

Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.

Company Name

Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.

Address

Ningbo Tucai Flexible Pipe Co., Ltd. : No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450 (China) TUCAI BULGARIA, Spdl. Ltd.: 7538 Aydemir Village, 39 Chernozem Street, Silistra Region (Bulgarie)

General Email

View All Listings by this Company