Directory Search Results

Print List

#2110324

Range of polyphosphate scale inhibitors comprising of an inline (nickel plated) brass body and head, and a separate cartridge with an aluminium body and plastic cap. Maximum working pressure 5.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
15mm compression
Marking:
Models BWT AC002100 & AC002400: BWT on adhesive label on body. Models Permutit PT000150 & PT000300: BWT and Permutit on sump base.
Installation Requirements:
R001 R008 R120 R150 R170 R290
Expiry date:
31/10/2026
Model:
BWT AC002100 (head and cartridge) & AC002400 (refill cartridge only) Permutit PT000150 (head and cartridge) & PT000300 (refill cartridge only).

Approval Holder:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company
Manufacturer:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company

Print This Approval


#2109341

Range of UV disinfection units incorporating 316L stainless steel bodies and quartz sleeves. Maximum working pressure 10.0 bar. Maximum operating temperature 35°C.

Section:
2411 Disinfection Equipment
Size:
DN150, DN200, DN250, DN300, DN350 & D400 flanged connections
Marking:
Bio-UV logo, model, date of manufacture (DD/MM/YYYY) and technical information on adhesive label on electrical cabinet. Bio-UV and other technical information on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290 R511
Expiry date:
30/09/2026
Model:
‘IAM’ range of models: IAM2273 300W IAM4273 300W IAM6273 300W IAM4273 400W IAM6273 400W IAM8323 400W IAM6355 800W IAM8406 800W

Approval Holder:
Bio-UV group
Company Name
Bio-UV group
Address
850 avenue Louis Médard Lunel
Postcode
34400
Country
France
Phone
+ 33 (0)4 26 89 98 77
General Email
dedet@bio-uv.com

View All Listings by this Company
Manufacturer:
Bio-UV group
Company Name
Bio-UV group
Address
850 avenue Louis Médard Lunel
Postcode
34400
Country
France
Phone
+ 33 (0)4 26 89 98 77
General Email
dedet@bio-uv.com

View All Listings by this Company

Print This Approval


#2104073

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:
2450 Water softeners
Size:
¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
Marking:
Monarch Company details, model and other product info on adhesive label on rear of body. Model on front
Installation Requirements:
R001 R150 R170 R290 R415
Expiry date:
30/04/2026
Proviso:
Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
Model:
Mini Aqua HE CS100HE PROSOFT100HE EVER 9 Midi HE CS150HE PROSOFT150HE EVER 12 Master HE CS200HE PROSOFT200HE EVER 18 Matrix HE CS300HE PROSOFT300HE EVER 30 PS12 HE PS15 HE GS4000 HE GS6000 HE LPS HE PROSOF 120 XE PROSOFT 120 XE PROSOF 160 XE PROSOFT 160 XE PROSOF 350 XE PROSOFT 350 XE SOF3000HE SOF6000HE

Approval Holder:
Monarch Water Ltd
Company Name
Monarch Water Ltd
Address
Fair Green Diss Norfolk
Postcode
IP22 4DG
Country
United Kingdom
Phone
01986 784759
General Email
kdelaney@monarchwater.co.uk

View All Listings by this Company

Print This Approval


#2202503

‘Inertol BS10’. Factory applied, black coloured bitumen coating. Apply as per manufacturer’s technical data sheet 'no. 786.3' dated 2013-V2'. Cure for 5 hours@23°C or 30 minutes@50°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Section:
5021 Bituminous Based Products
Section Subtitle:
Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:
2202503
Expiry date:
28/02/2027

Approval Holder:
Mäder Group
Company Name
Mäder Group
Address
Burschgrundstrasse 10-12, 45894 Gelsenkirchen
Country
Germany

View All Listings by this Company

Print This Approval


#2111530

'Tankguard 412'. White coloured, factory applied, 2 part epoxy coating. Mix and apply as per manufacturer's TDS dated 6 November 2015. Cure for 7 days@23°C. Between 1st November 2021 and 27th July 2022 this coating is for use with water up to 23°C. Between 28th July 2022 and 30th November 2026 this coating is for use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2111530
Expiry date:
30/11/2026

Approval Holder:
Guangzhou Yao Wei Decoration Engineering Co. Ltd
Company Name
Guangzhou Yao Wei Decoration Engineering Co. Ltd
Address
Room 313, No.28 Zhoumen North Road, Liwan District, Guangzhou
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 50 of 451

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.