Directory Search Results

Print List

#2212009

Range of air vent valves with brass (covered with blue polyester coated ductile iron body) or plastic bodies and plastic floats. Maximum working pressure 16.0 bar (AP models) or 25.0 bar (AQ models). Cold water use only.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2212009
Size:
½” – 2” BSP (M)
Marking:
Plastic body – Dorot logo on label and PN on body DI body - Dorot, PN and model code on data plate.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
DAV KA Kinetic & Automatic, Air Release Valve (ARV). Cat No APECPxx000 000 01. DAV A Automatic, ARV. Cat No APEAPxx00000001. DAV MP-A Metal Plastic Automatic, ARV. Cat No AQEAPxxPB000001. DAV MP-KA Metal Plastic Kinetic & Automatic, ARV. Cat No AQECPxxPB000001. Xx denotes the size, and this can be replaced with any of the following: 50 = ½” 75 = ¾” 10 = 1” 20 = 2”

Approval Holder:
Aquestia Ltd.
Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company
Manufacturer:
Aquestia Ltd.
Company Name
Aquestia Ltd.
Address
Kfar Charouv Ramat Hagolan
Postcode
12932000
Country
Israel
General Email
orly.yariv@aquestia.com

View All Listings by this Company

Print This Approval


#2212028

Range of automatic air venting valves incorporating epoxy coated, ductile iron bodies and plastic float. Maximum operating pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2212028
Size:
DN25, DN50, DN80, DN100, DN150 & DN200
Marking:
AVK, DN and PN on body. AVK and other info on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
S851 Series comprising of models: 85102541971000 85105041111000 85108041111000 85110041111000 85115041111000 85120041111000

Approval Holder:
AVK Valves Manufacturing Malaysia SDN BHD
Company Name
AVK Valves Manufacturing Malaysia SDN BHD
Address
Lot No. 1, Jalan SG Chadong 8 Batu 5½ Mile, Jalan Kapar 42100 Klang
Country
Selangor

View All Listings by this Company
Manufacturer:
AVK Valves Manufacturing Malaysia SDN BHD
Company Name
AVK Valves Manufacturing Malaysia SDN BHD
Address
Lot No. 1, Jalan SG Chadong 8 Batu 5½ Mile, Jalan Kapar 42100 Klang
Country
Selangor

View All Listings by this Company

Print This Approval


#2211044

Range of wall mounted thermostatic blending valves (brass bodies), with ceramic cartridge headworks controlling the temperature and the flow and a manual diverter that diverts the flow to two outlets. Both have single lever operating members. Maximum working pressure 5.0 Bar Maximum operating temperature 65°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2211044
Size:
½” BSP (F)
Marking:
VOLA on operating member and valve body
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
VOLA 400V, VOLA 400FV, VOLA 400NV, VOLA 400RV, VOLA 400TV

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2211049

Range of wall mounted, manual, shower blending valves, comprising of a concealed brass body (rough in set) and a trim set (chrome plated), which includes a ceramic cartridge headwork with a single lever operating member. The 2551 and 2551EP trim set models also have a 90° wall outlet elbow. The 2541 and 2551 models are supplied with a combined plastic filter and plastic flow regulator (x2) for installation on each concealed body inlet. The 2541EP and 2551EP models are supplied with a combined plastic filter and an approved single check valve with a plastic flow regulator (x2), for installation on each concealed body inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The concealed rough in set incorporates a manually operated isolation valve on each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2211049
Note:
This approval does not include a shower hose and handset.
Size:
½” BSP (F) to concealed rough in set.
Marking:
Concealed bodies: Dealbie on product casing. Trim sets: Delabie on operating member and face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
2541 + 254BOX, 2541EP + 254BOX, 2551 + 254CBOX, 2551EP + 254CBOX.

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#2211329

Wall mounted thermostatic shower mixer with brass body (chrome plated), incorporating a ceramic cartridge headwork ,controlling the flow and temperature and single lever operating member. The shower outlet incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2211329
Note:
Product is not supplied with a shower hose and handset.
Size:
3/4” BSP (F) captive nuts. Supplied with ½” x ¾” BSP (M) offset unions
Marking:
Grohe on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
23.633.001 Bauloop

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 490 of 1771

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.