Directory Search Results

Print List

#2402700

Range of single-hole, single outlet (swivel) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2402700
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
The 1810 Company Ltd logo on handle
Installation Requirements:
R001 R006 R009 R010
Expiry date:
28/02/2029
Model:
DAV/01/CH (Chrome) DAV/02/BS (Brushed Steel)

Approval Holder:
The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

Print This Approval


#240102077

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240102077
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2029
Model:
71 832 xx0 71 833 xx0 71 839 xx0 31 816 xx0 71 860 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2312357

Range of two-hole, single outlet, fixed combination tap assemblies, (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates plastic flow straighteners. The products are supplied with a shower hose, handset and metal back nuts. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2312357
Size:
¾” BSP (M)
Marking:
Bristan on body
Installation Requirements:
R001 R006 R020
Expiry date:
31/12/2028
Model:
APL BSM C APL BSM BLK APL BSM BB APE BSM C APE BSM BLK APE BSM BB APE BSM GM 283644 283647 Model added February 2026: RP3 APE BSM BLK

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2402804

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65˚C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2402804
Size:
Stainless steel braided EPDM/PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
PPI on to Rear of Body
Installation Requirements:
R001 R006 R010
Expiry date:
28/02/2029
Model:
M3207Q CP

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2310396

Range of single hole, single outlet, (swivel) combination tap assembly (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2310396
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections
Marking:
Instinct on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2028
Model:
4E7010 – Keal Kitchen Mixer Chrome 4E7009 – Cullin Kitchen Mixer Chrome 4E7004 – Kiso Kitchen Mixer Chrome

Approval Holder:
PHG (Plumbing Heating Group)
Company Name
PHG (Plumbing Heating Group)
Address
C/O Walter Tipper Ltd , Europa Way, Lichfield, Staffs.
Postcode
WS14 9TZ

View All Listings by this Company

Print This Approval


#2402805

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65˚C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2402805
Size:
Stainless steel braided EPDM/PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
ebb & flo on Body.
Installation Requirements:
R001 R006 R010
Expiry date:
28/02/2029
Model:
38842 Ladram Mono Mixer Kitchen Tap

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2312057

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a dome type operating member to control the temperature. The spout outlet incorporates a plastic aerator and a detent headwork that controls the flow.. The inlets incorporate approved check valve cartridges however the complete product has not been fully tested to demonstrate It provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2312057
Size:
½” BSP (F)
Marking:
AXOR logo on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
45 112 xx0 45 113 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2408801

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass or gold finish) incorporating non-rising spindle headwork with dome type or cross top operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2408801
Size:
¾” BSP (M)
Marking:
DTC 34 on body.
Installation Requirements:
R001 R005 R010
Expiry date:
31/08/2029
Model:
DCM108 DCM108/501 MILAN 108

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2312006

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Product is to be installed with 13 622 180 rough inset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2312006
Note:
Note: 13 622 180 rough inset is not supplied as part of the approval.
Size:
1/2" BSP (F) inlets.
Marking:
Marking: Hansgrohe on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
31 085 XX0 31 086 XX0 31 251 XX0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2401710

Wall mounted, two hole, single outlet (fixed) combination tap assembly with (brass body - various finishes), incorporating a half-turn ceramic disc headwork with a dome type operating member, controlling and diverting the flow to a shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2401710
Size:
1/2" BSP (M)
Marking:
Axor on Faceplate
Installation Requirements:
R001 R020
Expiry date:
31/01/2029
Model:
12 410 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 485 of 1043

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.