Directory Search Results

Print List

#2112042

A range of four-hole single outlet fixed combination tap assemblies with brass bodies in a variety of finishes (See models). Incorporating ¼ ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet elbow incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is supplied with a shower hose, shower handset and metal screw clamp type back nuts. The side valves and the spout are connected with a copper tube. Maximum working pressure 10 bar. Maximum working temperature 60 °C.

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Multi hole tap(s) with a single outlet and a swivel spout , incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).
WRAS Approval Number:
2112042
Size:
For use with basic set 13244180 which has ½” BSP (M) inlets
Marking:
HANSGROHE on Spout
Installation Requirements:
R001 R006 R030
Expiry date:
31/12/2026
Model:
HG Vernis Blend 4 hole bath mixer chrome models: 71 456 xxx 71 459 xxx Has to be installed with basic set 13 244 180 (HG 4 hole bath mixer basic set) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2010103

Range of floor mounted, single hole, single outlet fixed combination tap assemblies (chromium plated brass with a self-cancelling diverter to shower outlet. The product incorporates a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate an aerator and the product is supplied with a hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2010103
Size:
Stainless-steel braided EPDM lined hose assembly with 3/4" captive nut end connections.
Marking:
Kingfisher good home logo on body
Installation Requirements:
R001 R030
Expiry date:
31/10/2025
Model:
3663602299721 COMBINATION TAP ASSEMBLIES
Product Images

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2112004

Range of wall elbows incorporating brass bodies (various finishes) and various back plates. Maximum operating temperature 95ºC.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2112004
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
SHS on body.
Installation Requirements:
R001 R040
Expiry date:
31/12/2026
Model:
V264-W-XX Fairfield Elbow V664-W-XX Style Moderne Elbow V764-W-XX Landmark Elbow T164-W-XX 100 Collection Elbow “XX” denotes choice of finish available and can be replaced with any of the following: CP = Chrome Plate PN = Polished Nickel SSF = Stainless Steel Finish NL = Non-Lacquered BG = Brushed Gold BGG = Brushed Gold Gloss lacquered BGM = Brushed Gold Matt Lacquered CTB = City Bronze CNB = Country Bronze AG = Antique Gold MOP = Matt Finish MBC = Matt Black Chrome SSB = Stainless steel finish URB = Urban Brass URM = Urban Brass Matt

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2111052

Carbon block filter cartridge with plastic body. The cartridge may be installed with a manifold (filter head) for use with PE tubing manufactured to BS 1972. Maximum working pressure 8.6 bar. Cold water use only

Section:
1055 Filter Cartridges
Size:
Filter: 11mm spigot. Manifold: ¼” pushfit.
Marking:
Good home (Tradename of Kingfisher), model and technical info on label on body (Filter) Kingfisher on body (Manifold) model and technical information on label on body
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/11/2026
Model:
FC01 FILTER CARTRIDGES & SINGLE STAGE MANIFOLD
Product Images

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2112025

ERA-01 range of SDR11 and SDR17 polyethylene butt welded fittings for use with ERA-02 range of SDR11 and SDR17 PE 100 pipe. SDR11 rated pipe and fittings have a maximum working pressure of 16.0 bar. SDR17 rated pipe and fittings have a maximum working pressure of 10.0 bar. For above and below ground use. Cold water use only.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2112025
Size:
SDR11 pipe and fittings = DN75 – DN315. SDR17 pipe and fittings = DN160 – DN315.
Marking:
‘ERA®’ and technical information on pipe and fitting.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
ERA-01 range of fittings (90° elbow, 45° elbow, flange, cross, straight tee, reducing cross, reducing tee, end cap and reducing socket) for use with ERA-02 pipe.
Product Images

Approval Holder:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 471 of 2268

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.