Range of copper solder ring fittings for use with copper tube. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011048

Size:

8mm - 54mm.

Marking:

Manufacturer’s logo and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F05 - Solder Ring Elbow. F01 - Solder Ring Coupling. F11 - Solder Ring Tee.

Product Images

Approval Holder:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011363

Size:

See model.

Marking:

Flomasta and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of brass compression fittings for use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011314

Size:

½”, ¾” or 1” compression

Marking:

HM Pro on body. Heatmerchants Pro, size and technical information on nut.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

U47171, U47172, U47174, U47173, U47175, U47176, U47177, U47179, U47178, U47180, U47181, U47182, U47185, U47183, U47184, U47186, U47187, U47188, U47189, U47190, U47191, U47192, U47193, U47194, U47195, U47197, U47196, U47198, U47199, U47200, U47205, U47204, U47201, U47202, U47203, U47211, U47206, U47208, U47209, U47207, U47210, U47212, U47214, U47218, U47219, U47220, U47221, U47222, U47223

Product Images

Approval Holder:

Heat Merchants Group.

Company Name

Heat Merchants Group.

Postcode

CO WESTMEATH

View All Listings by this Company

Range of end feed copper fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011038

Size:

Please refer to model.

Marking:

◊ A ◊ (Masterflow logo) and 'SIZE' on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Masterflow soldered endfeed: Straight Coupler 8mm to 54mm. Reduced Coupler 8mm to 54mm. Fitting Reducer 8mm to 54mm. Fitting Reduce (Long) 8mm to 15mm. Imperial/Metric Coupler 1/2”x15mm.3/4”x22mm.1”x28mm. Slip Coupler 15mm to 28mm. C x Fl Straight Coupler 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”, 28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. Cx Ml Straight Coupler 15mm x 1/4”,15mm x 1/2”,22mm x 1/2”, 22mm x 3/4”,28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. C x Fl 15mm x 1/2”,22mm x 3/4.” C x Ml Elbow 15mm x 1/2”,22mm x 3/4”. 90 deg Elbow 8mm to 54mm. 90 deg Street Elbow 10mm to 54mm. Obtuse Street Elbow 15mm to 54mm. End Feed Long Radius Street Elbow 15mm x 54mm. 45 deg Obtuse Elbow 15mm to 54mm. Wallplate Elbow 15mm x 1/2”. Part Crossover 15mm to 22mm. Full Crossover 15mm to 22mm. Equal Tee 10mm to 54mm. Reduced Branch Tee 10mm to 54mm. Reduced End Tee 15mm to 54mm. Reduced End & Branch Tee 15mm to 54mm. Both Ends Reduced Tee 15mm x 28mm. Extended Street Elbow 15mm x 150mm. Fl Tee (Fl On Run) 15mm x 1/2” x 15mm, 22mm x 1/2” x 22mm. Fl Tee (On Run) 15 x 15 x 1/2”,22 x22 x 1/2”,22 x 22 x 3/4”. Stop End 8mm to 54mm. Straight Tap Connector 15mm x 1/2”,15mm x 3/4”, 22mm x 3/4”. Bent Cap Connector 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”. Bent Union Adaptor 22mm x 1”. Straight Union Adaptor 22mm x 3/4”,22mm x 1”,28mm x 1”. Air Vent Cap 15mm and 22mm. U Bend 15mm.

Product Images

Approval Holder:

Masterflow UK

Company Name

Masterflow UK

Address

Astley Park Estate, The Gatehouse, Kennedy Road, Astley, Manchester

Postcode

M29 7JY

View All Listings by this Company

End Feed Range copper fittings for use with copper tube. For above and below ground use Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011053

Size:

8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm & 54mm.

Marking:

Linhai Hengye Tubing logo (IOJ) and size on body.

Installation Requirements:

R0001

Expiry date:

30/11/2025

Model:

5090 (Elbows), 5270 (Couplings) & 5130 (Tees).

Product Images

Approval Holder:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Range of dual flush, WC outlet valves. Each valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating temperature – Cold water use.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2011046

Note:

Not supplied with an operating button

Size:

62 ∅

Marking:

WDI, ECO and series on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

K4050-G-YYB1, K4050-G-YYB2, K4050-G-YYB3 & K4050-G-YYB4.

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. Incorporating a pressure relief valve and expansion vessel. Primary circuit has a maximum working pressure of 3.5 bar and operating temperature of 85°C. Secondary circuit has a maximum working pressure of 10.0 bar and operating temperature of 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2011037

Note:

A filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.

Size:

½” BSP male inlet and outlet (DHW). ¾” BSP male inlet and outlet (CH).

Marking:

Lukey on adhesive label on front.

Installation Requirements:

R001 R140

Expiry date:

30/11/2025

Model:

Lukey solution HE (18kW CH & 26kW DHW). Lukey solution HE+ (18kW CH & 26kW DHW). Lukey solution HES+ (18kW CH & 26kW DHW). Lukey solution CBU (18kW CH & 26kW DHW). Beginning February 2021 the models will be named: Lukey 28 HE (18kW CH & 26kW DHW). Lukey 28 HE+ (18kW CH & 26kW DHW). Lukey 28 HES+ (18kW CH & 26kW DHW). Lukey 28 CBU (18kW CH & 26kW DHW).

Product Images

Approval Holder:

Lukey Cassette Boilers (UK) Ltd.

Company Name

Lukey Cassette Boilers (UK) Ltd.

Postcode

BH24 2BB

View All Listings by this Company

Manufacturer:

Lukey Cassette Boilers (UK) Ltd.

Company Name

Lukey Cassette Boilers (UK) Ltd.

Postcode

BH24 2BB

View All Listings by this Company

RINNAI range of wall mounted combination boilers.The unit incorporates a stainless-steel plate heat exchanger pressure relief valve set at 3.0 bar and an expansion vessel on the primary circuit. Maximum working pressure of primary circuit is 2.5 bar and secondary circuit is 10.0 bar. Maximum operating temperature 60˚C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2011033

Note:

Not supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.

Size:

Primary circuit: ¾” (M) BSP inlet and outlet. Secondary circuit: ½” (M) BSP inlet and outlet

Marking:

Rinnai on front. Rinnai, model and technical information on adhesive label on side of unit.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2025

Model:

ZEN i24 Combi Boiler – REB-KBI2424FF. ZEN i29 Combi Boiler – REB-KBI2929FF. ZEN i34 Combi Boiler – REB-KBI3535FF.

Product Images

Approval Holder:

Rinnai UK Ltd

Company Name

Rinnai UK Ltd

Address

9 Christleton Court Manor Park Runcom

Postcode

WA7 18T

Phone

01928 531 870

General Email

info@rinnaiuk.com

View All Listings by this Company

Hydroblock unit consisting of a stainless steel heat exchanger, a pressure relief valve pre-set at 3.0 bar, diverter valve and return valve. Maximum working pressure 2.5 bar. Maximum operating temperature 90°C

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

2011351

Size:

Primary side – ¾” BSP (M) x 18.8mm manifold. Secondary side – ½” BSP (M) x ½” BSP (M)

Marking:

Hydro Zero logo & model on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Hydroblock HB-112

Product Images

Approval Holder:

Hydro Zero Ltd.

Company Name

Hydro Zero Ltd.

Postcode

LS28 9LE

View All Listings by this Company

Range of flow measurement devices (DZR brass) bodies incorporating two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Size:

See model.

Marking:

Crane, size, PN, CR, model and flow arrow on body.

Installation Requirements:

R001

Expiry date:

28/02/2026

Model:

D901 & 902: Inlet: ½” screwed ISO 228 parallel BSPP (F). Outlet: ½” taper threaded to BS EN 10266-2 BSPT (M). D901: Inlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (F). Outlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (M).

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

enquiries@cranefs.com

View All Listings by this Company