Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2012087

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:: 1719 Flow Activated Switches
WRAS Approval Number:: 2012087
Note:: Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:: ¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:: RELIANCE VALVES ON PLASTIC COVER
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: LEKP100001 - ¾, LEKP100002 1” & LEKP100003 1¼ FLOW ACTIVATED SWITCHES

Product Images

Manufacturer:: Reliance Worldwide Corporation

Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060

View All Listings by this Company

WRAS Approval Number: #2012337

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2012337
Size:: See model
Marking:: PPI on rear of body.
Installation Requirements:: R001 R005
Expiry date:: 31/12/2025
Model:: ½” BSP (M) 902001H 902001F 902001F PVD ¾” BSP (M) 902002H 902002F 902002F PVD

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

WRAS Approval Number: #2101027

Range of TPE and TPS lined flexible hose assemblies incorporating NBR ‘O’-rings and various end connections. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2101027
Note:: Open outlet use only.
Size:: see model
Marking:: IF logo, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/01/2026
Model:: FPE2MX.SMWWYYYYZZZ FPF2MX.SLWWYYYYZZZ X denotes the fitting size, for example; A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x 15X1M F = ½ “ BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = 15X1M x 15X1M L = 15X1M x 3/8” BSP (M) M = 15X1M x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x 12X1M U = ½” BSP (F) x 10x1M WW denotes the hose finish, for example; DK = Black (SL Model), PL = White (SL Model), CR = Chrome (SM Model), BN = Brushed Nickel (SM Model), RG = Red Gold (SM Model), GO = Gold (SM Model), BC = Black (SM Model). YYYY denotes the fitting finish, for example; ZZZ denotes then hose length, for example 050 = 500mm 200 = 2000mm

Approval Holder:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company
Manufacturer:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company

WRAS Approval Number: #2106046

Range of chromium plated brass interlocked shower hoses incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2106046
Note:: Open outlet use only.
Size:: ½” BSP Captive nut inlet x outlet.
Marking:: VADO on conical nut. Models: AX-SH-015-100-CP & AX-SH-015-150-DB-CP Axces by Vado on conical nut.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: H251200002S-03 SH-012-120-C/P (SH-012-120-DB-C/P) H251500002S-03 SH-012-150-CP (SH-012-150-DB-C/P) H252000002S-03 SH-012-200-C/P (SH-012-200-DB-C/P) H251000002S-05 SH-013-100-CP-LB H251500002S-05 SH-013-150-CP-LB (SH-013-150-DB-CP-LB) H252000002S-05 SH-013-200-CP-LB Model added AUGUST 22: AX-SH-015-100-CP AX-SH-015-150-DB-CP

Product Images

Approval Holder:: VADO

Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

WRAS Approval Number: #2101355

‘Platinox SLP’ range of stainless steel braided silicone lined flexible hose assemblies with a variety of end connections (see size). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2101355
Size:: Hose Sizes DN6: Female elbow (captive nut) 15x1. Female (captive nut) ⅜”, ½”, 10x1, 16x1. Tube TL ø6 - ø15mm. Male MOK M6, M8, M10, M12, M16. Male M ⅜”, ½” BSP (M). Comp. joint ø10. Hose Sizes DN8: Female elbow (captive nut) ⅜”, ½”. Female (captive nut) ⅜”, ½”. Tube TL ø6 - ø15mm. Male MOK M10, M15. Male M ⅜” BSP (M). Comp. joint ø10. Hose Sizes DN10: Female elbow (captive nut) ½”, ¾”. Female (captive nut) ⅜”, ½”, ¾”. Tube TL ø15mm. Male MOK M12. Male M ⅜”, ½” BSP (M). Hose Sizes DN13: Female elbow (captive nut) ½”, ¾”. Female (captive nut) ½”, ¾”.
Marking:: Platinox SLP, NPI, WRAS, DN, max. temp, max. pressure and date of manufacture (YYMM) on crimped connector.
Installation Requirements:: R001 R008
Expiry date:: 31/01/2026
Model:: 39.03CD.EFG.HI 39 = Hose Type: supply hose. 03 = Hose (inliner) material: PLATINOX SLP CD.EFG = Manufacturing sequential number HI = Packaging information The same product can also be sold under the following code structure: AAA.BBBBBB.CCC AAA = braiding specification (all are stainless steel) DN6: X80, X88, X8B, X8R, XP8. DN8: PT7, X69, X7B, X7R, X81, X84, X87, XV7. DN10: X82, X85, XB2, XR2, XV5. DN13: X83, X86. BBBBBB = Manufacturing alphanumeric string. CCC = Length of the hose in mm, e.g. 500 = 500mm, U20 = 1200mm, D50 = 2500mm, T50 = 3500mm, Q00 = 4000mm.

Product Images

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company