Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110112

Size:

See model

Marking:

Company logo "S", WRAS, and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

SS-E1: DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. SS-E2: DN8 bore: 15mm compression, ⅜” & ½” captive nut. DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. DN17 & DN19 bore: 22mm compression, ¾” captive nut. SS-E3: DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). SS-E4: DN10 bore: 15mm compression with isolation valve, 15mm pushfit. DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. SS-E7: DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. SS-E8: DN8 bore: 15mm compression, ⅜” & ½” BSP (M). DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). DN17 & DN19 bore: 22mm compression, ¾” BSP (M). SS-E9: DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. SS-E10: DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. SS-E11: DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit. DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. SS-E12: DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Product Images

Approval Holder:

Ningbo Safewell Plumbing Co. Ltd.

Company Name

Ningbo Safewell Plumbing Co. Ltd.

Address

199 Xiangyun North Road Ningbo Hi-Tech Zone Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110120

Size:

See model

Marking:

Valtech, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

FH-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. FH-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. FH-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. FH-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. FH-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. FH-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. FH-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). FH-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). FH-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). FH-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). FH-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. FH-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. FH-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. FH-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. FH-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. FH-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). FH-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). FH-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. FH-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. FH-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. FH-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. FH-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. FH-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit FH-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. FH-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. FH-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). FH-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). FH-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of indirect and direct unvented storage cylinders consisting of either no coil (GLE) or a factory fitted single (GLC) or twin coil (GLT). The secondary circuit is supplied with a temperature and pressure relief valve set at 7.0 bar@85˚C for 1.0-6.0 bar products and 10.5 bar@95°C for 6.0-10.0 bar products. The products are supplied with an inlet control group (safety kit) consisting of a pressure reducing valve, an expansion relief valve 6.0 bar (1.0-6.0 bar products) or 10.5 bar (6.0-10.0 bar products) and an approved check valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is also supplied with an expansion vessel. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1890 Unvented Heating Apparatus

Size:

1 ½” BSP (M) secondary (inlet kit) 1 ½” BSF (F) secondary cylinder 1” BSP( F) primary coils

Marking:

Adveco badge on casing Serial No, Adveco, address, model no. capacity, & other tech info on adhesive label on body G3 warning label, maintenance label, service label, energy label on casing

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

Adveco GLE Range GLE 200, GLE 300, GLE 500, GLE 750, GLE1000 Adveco GLC Range GLC 200, GLC 300, GLC 500, GLC 750, GLC 1000. Adveco GLT Range GLT 200, GLT 300, GLT 500, GLT 750, GLT1000

Product Images

Approval Holder:

Adveco Ltd

Company Name

Adveco Ltd

Address

Unit 7 & 8 Armstrong Mall Southwood Business Park Farnborough Hants

Postcode

GU14 0NR

Country

United Kingdom

Phone

01252 551 540

General Email

enquiries@adveco.co

View All Listings by this Company

Vacuum relief valve with a DZR brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 99˚C

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

2203703

Size:

½” BSP (M)

Marking:

Reliance, date of manufacture (D/WW/Y), DR and technical information on cap.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

ADMT503001

Product Images

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

A range of wall mounted self-closing shower valves (chromium plated brass), incorporating a spring loaded headwork with a dome type operating member. Model TF222CP250 is supplied with metal back nut. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

2201068

Size:

15mm compression inlet and outlet:

Marking:

INTA on operating member

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

TF992 CP TF99230 CP TF99730 CP TF997 CP TF222 CP 150 TF222 CP 200 TF222 CP 250

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Manufacturer:

Idral S.p.A.

Company Name

Idral S.p.A.

Address

Via Isei, 8/10 - I-28010 Gargallo (NO)

Country

Italy

Phone

+39 0322 912017

General Email

View All Listings by this Company