Directory Search Results

Print List

#2110320

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressure relief valve set at 3.0 bar. The supplies to both primary hot water and secondary are controlled via spherical valves. The boilers incorporate a filling loop assembly which incorporates a double check valve assembly (suitable for backflow protection against Fluid Category 3). Primary circuit: Maximum working pressure 2.5 bar. Maximum operating temperature 82°C. Secondary circuit: Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2110320
Size:
22mm compression
Marking:
Worcester (brand of Bosch) on front of boiler. Worcester, address, model, serial No. & other tech info on adhesive label on inside of panel.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
Greenstar Highflow range comprising of model numbers: 7 731 600 098 (model code: 440CDi ErP). 7 731 600 099 (440CDi ErP). 7 731 600 100 (550CDi ErP). 7 731 600 101 (550CDi ERP).
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#2111310

Hydraulic block assembly comprising a flow sensor, primary pump assembly, pressure relief valve preset at 3.0 bar and plate heat exchanger. Maximum working pressures: secondary = 10.0 bar and primary = 2.5 bar. Maximum operating temperature 80°C.

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2111310
Size:
Primary: ¾” captive nut. Secondary: ½” captive nut
Marking:
Bosch, model number and WRAS approved on adhesive label on circulating pump.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
8 718 687 771
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#2111023

‘Aquila V4 C1’ range of water meters (brass or bronze bodies) with a plastic working chamber, flow regulator and impellor, and either NBR or EPDM ‘O’-rings. The products are supplied with loose NBR/fibre flange gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
DN50 - DN100 flanged
Marking:
DIEHL logo on cap. DIEHL METERING, CE, temperature, maximum pressure and other technical information on meter face. Flow arrow and size on body
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
Aquila V4 C1: Brass bodies: DN 50 and DN 65 length 300 mm Bronze bodies: DN 80 and DN 100 length 350 mm
Product Images

Approval Holder:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company
Manufacturer:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company

Print This Approval


#2111043

A range of water meters incorporating brass or plastic bodies (See models), EDPM ‘O’-rings, plastic strainer on the inlet and a plastic impellor. Maximum working pressure 16.0 bar. Maximum working temperature 85°C (brass bodies) or cold water use only (plastic bodies)

Section:
1505 Water Meters
Size:
DN 15 models – ¾” BSP (M) DN 20 models – 1” BSP (M)
Marking:
Zenner, Q3, year of manufacture (YYYY), max operating pressure and other technical info on face plate. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
Minomess A Brass Minomess A Plastic
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company
Manufacturer:
Zenner Meters (Shanghai) Ltd.
Company Name
Zenner Meters (Shanghai) Ltd.
Address
No 15 Dongxing Road Songjiang Ind Zone Shanghai
Country
China

View All Listings by this Company

Print This Approval


#2110358

Range of water meter assemblies which incorporating DZR brass bodies, spherical valve and pressure reducing valve (1.5 to 6.0 bar range). The products incorporate two approved, in-line single check valve cartridges, (verified by test, suitable for backflow protection against Fluid Category 3). Fitting is also supplied with a pressure guage. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
¾” with straight connector or meter connection. 1” with straight connector or meter connection.
Marking:
Essco Controls, CR, flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
ESS-90501035 PRV-CON. ESS-90501101 PRV-CON. ESS-90501035 CARRIER PRV-CON. ESS-90501101 CARRIER PRV-CON.
Product Images

Approval Holder:
Essco Controls Ltd (T/A Essco Group)
Company Name
Essco Controls Ltd (T/A Essco Group)
Address
J1 Adanac North Adanac Drive Southampton
Postcode
SO16 0BT
Country
United Kingdom
General Email
mike.bennett@esscogroup.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 439 of 2268

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.