Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260102013

Type ‘J’ range of plate heat exchangers with stainless steel (AISI 304L or AISI 316L) fin and end plates. Maximum working pressure 3.0 bar (primary circuit) and 10.0 bar (secondary circuit). Maximum operating temperature 80°C.

Section:: 1350 Heat Exchangers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M) Primary circuit. ½” BSP (M) Sanitary circuit.
Marking:: Condevo S.p.A. and model on adhesive label on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Type ‘J’ range comprising of: PP10FJX. PP12FJX. PP14FJX. PP16FJX. PP18FJX. PP20FJX. PP22FJX. PP24FJX. PP26FJX. PP28FJX. PP30FJX. PP32FJX. PP34FJX. X denotes the body material and is replaced with: 4 = AISI304L 6 = AISI316L

Approval Holder:: Condevo SpA

Company Name
Condevo SpA
Address
Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

WRAS Approval Number: #260104013

Range of copper brazed, stainless steel (316) heat exchangers in various sizes (4-300 plates, see models). Maximum working pressure: see models. Maximum operating temperature: 99°C.

Section:: 1350 Heat Exchangers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” - 3” BSP (M).
Marking:: SWEP, models, PN and tech info on adhesive label on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: X8T-SC-S - Number or Plates: MIN 4 – MAX 60, Max Flow rate – 4 m3/h - ½”, ¾” - 32/26bar. 10T-SC-M - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 9 m3/h - 3/8” to 1 ¼” - 41/36bar. 15T-SC-M - Number or Plates: MIN 4 – MAX 60, Max Flow rate – 4 m3/h - ½” to 1” - 45/45bar. 16DW-SC-S - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 11,3 m3/h ½” to 1 ¼” - 16/16bar. 16DW-SC-M - Number or Plates: MIN 4 – MAX 140, Max Flow rate – 11,3 m3/h - ½” to 1 ¼” - 45/45bar. 220-SC-S - Number or Plates: MIN 4 – MAX 300, Max Flow rate – 39 m3/h 1” to 2 ½” -25/25bar. 320HT-SC-S - Number or Plates: MIN 4 – MAX 300, Max Flow rate – 61,7 m3/h - 1 ½” to 2 ½” - 33/29bar. 320LT-SC-S - Number or Plates: MIN 4 – MAX 260, Max Flow rate – 76,2 m3/h - 1 ½” to 3” - 25/25bar.

Approval Holder:: SWEP International AB

Company Name
SWEP International AB
Address
Järvgatan 3B, Box 105, 26122 Landskrona
Country
Sweden

View All Listings by this Company
Manufacturer:: SWEP International AB/SWEP Slovakia s.r.o.

Company Name
SWEP International AB/SWEP Slovakia s.r.o.
Address
Box 105, 26122, Landskrona
Country
Sweden
Phone
+46 418400406

View All Listings by this Company

WRAS Approval Number: #260102020

Range of inline water meters with brass bodies Maximum working pressure 16.0 Bar. Cold water Only.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN15, DN20, DN25, DN30 & DN40
Marking:: George Kent & logo, model code, size, manufacture date George Kent Logo on Lid, Serial number above Counter all other markings cast or engraved on the chamber housing.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: GKMV30 & PSM

Approval Holder:: George Kent (Malaysia) Berhad

Company Name
George Kent (Malaysia) Berhad
Address
George Kent Technology Centre 1115 Jalan Puchong Taman Meranti Jaya 47120 Puchong Selangor
Country
Malaysia

View All Listings by this Company

WRAS Approval Number: #260102723

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: Huba Control logo and technical info on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Type 520: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 7/16"-20 UNF, sealed at front ISO 11926-1 Male G1/4", sealed at front, Female 1/2"-14 NPT, thread sealing, Male 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/8", sealed at front, Male G1/4", sealed at back without sealing groove, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/4", sealed at front, Female G1/4", sealed at front + Manometer, Male G1/4", sealed at back DIN 3852-2, Male R1/4", thread sealing EN 10226, Male G1/2", sealed at front, Male M20x1.5, sealed at front + Manometer, Male 7/16"-20 UNF, sealing cone with schrader, Female Type 522: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/2", sealed at front, Male G1/2", sealed at front + Manometer, Male M20x1.5, sealed at front + Manometer, Male Type 540: Dimension, Sealing type, Male/Female Thread G1/4", sealed at front, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male R1/4", thread sealing EN 10226, Male Additional Information The pressure orifice and the connectors are all made from stainless steel X2CrNiMo17-12-2/1.4404 / AISI316L. The Schrader is made from Stainless X8CrNi18-9/1.4305/303 All variants can use the following pressure cell options, based on application requirements: -1…9 Bar / 0…2.5 - 100 bar (Stainless Steel Cell X6Cr17-1.4016) The only difference between the models 520, 522 & 540 is the input and output signal, and the approvals (not relevant to WRAS) All the different type variants can be given a unique customer article number, to trace the full specification: Example: 520.99XXX 520 = Model Type 99 = Client / project specific number XXX = Unique file for client containing all the above options specified within model.

Manufacturer:: Huba Control AG

Company Name
Huba Control AG
Address
Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

WRAS Approval Number: #260104703

Circulation pumps with either bronze or stainless pump bodies and a plastic impeller. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 260104703
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Ebara logo, model no., serial no. and technical information on data plate. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: EHW-B 25-4-130: 1” BSP (F), EHW-B 25-4-180: 1” BSP (F), EHW-B 25-5-130: 1” BSP (F), EHW-B 25-5-180: 1” BSP (F), EHW-B 25-6-130: 1” BSP (F), EHW-B 25-6-180: 1” BSP (F), EHW-B 25-7-180: 1” BSP (F), EHW-B 25-8-180: 1” BSP (F), EHW-B 25-12-180: 1” BSP (F), EHW-S 20-6-130: ¾” BSP (M), EHW-S 25-6-180: 1” BSP (F), EHW-S 25-7-180: 1” BSP (F), EHW-S 25-8-180: 1” BSP (F), EHW-S 32-8-180: 1¼” BSP (F). Where: B = Bronze body. S = Stainless steel body. 20/25/32 = DN size (mm). 4/5/6/7/8/12 = head (m). 130/180 = Pump body size (length from body inlet to outlet) (mm).

Approval Holder:: Ebara Corporation

Company Name
Ebara Corporation
Address
11-1 Haneda Asahi-cho Ota-ku, Tokyo 144-8510
Country
Japan

View All Listings by this Company