Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2307522

'KAN-therm ultraPRESS PERTAL'. White coloured, extruded PE-RT/Al/PE-RT pipe. For use with water up to 65°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2307522
Expiry date:: 31/07/2028

Approval Holder:: KAN Sp z.o.o

Company Name
KAN Sp z.o.o
Address
Zdrojowa str 51, 16-001 Kleosin
Country
Poland

View All Listings by this Company

WRAS Approval Number: #2309507

'662016 & 662014'. White coloured (semi-translucent), extruded PTFE tape. For use with water up to 85°C.

Section:: 5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:: Components.
WRAS Approval Number:: 2309507
Expiry date:: 30/09/2028

Approval Holder:: Arctic Hayes Ltd.

Company Name
Arctic Hayes Ltd.
Address
9 Millshaw Park Avenue, Leeds
Postcode
LS11 0LR

View All Listings by this Company

WRAS Approval Number: #2309508

'INST61427N & INST61425T Tapes'. White coloured (semi-translucent), extruded PTFE tape. For use with water up to 85°C.

Section:: 5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:: Components.
WRAS Approval Number:: 2309508
Expiry date:: 30/09/2028

Approval Holder:: PHG (Plumbing Heating Group)

Company Name
PHG (Plumbing Heating Group)
Address
C/O Walter Tipper Ltd , Europa Way, Lichfield, Staffs.
Postcode
WS14 9TZ

View All Listings by this Company

WRAS Approval Number: #2307517

'01/U60EP 'O'-rings & gaskets'. Black coloured, injection moulded EPDM 'O' rings & gaskets. Shore hardness 60A. The ‘O’ rings have a tested in-radius size of 0.5mm. The gaskets have a tested in-radius size of 1.0mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 2307517
Expiry date:: 31/07/2028

Approval Holder:: LAV.EL. Gomma Srl

Company Name
LAV.EL. Gomma Srl
Address
Via Aldo Moro 20/22 25033 - Cologne (BS)
Country
Italy
Phone
0039.030.70.50.956
General Email
info@lavelgomma.it

View All Listings by this Company

WRAS Approval Number: #2307524

‘07146-80’ components. Black coloured, compression moulded EPDM components with a shore hardness of 80. Sealing Gasket with an in-radius of 1.5mm. Membrane Seal with an in-radius of 1.0mm. Sealing Gasket with an in-radius of 1.0mm. Gasket Membrane with an in-radius of 1.0mm. Sealing Ring with an in-radius of 1.0mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 2307524
Expiry date:: 31/07/2028

Approval Holder:: Gulf Rubber Group - Tumedei SpA

Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2307525

'ITK349601'. Black coloured, injection moulded EPDM C-seals. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 2307525
Expiry date:: 31/07/2028

Approval Holder:: Italstock S.r.l.

Company Name
Italstock S.r.l.
Address
Via Don Alessandro Ravizza 80, 24060 Castelli Calepio, Bergamo
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2312502

'EP5360'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in -radius size 1.1mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2312502
Expiry date:: 31/12/2028

Approval Holder:: WEFLO Valve Co., Ltd.

Company Name
WEFLO Valve Co., Ltd.
Address
No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong
Country
China

View All Listings by this Company

WRAS Approval Number: #2307515

'CS-EW70'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 0.96mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2307515
Expiry date:: 31/07/2028

Approval Holder:: Cherrysource Ltd.

Company Name
Cherrysource Ltd.
Address
Unit 7, Pinfold Lane, Llay Industrial Estate, Llay, Wrexham
Postcode
LL12 0PX

View All Listings by this Company

WRAS Approval Number: #2306559

'ML 57314'. Black coloured, compression moulded EPDM material. Shore hardness 68A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2306559
Expiry date:: 30/06/2028

Approval Holder:: SumiRiko AVS Germany GmbH

Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2309505

'0477 NBR 70' components. Black coloured, injection moulded NBR rubber ‘O’ rings, washers and lip seals. Shore hardness 70. The ‘O’ rings have an in-radius of 1.31mm, the washers 1.05mm and the lip seals 0.45mm. For use with water up to 60°C.

Section:: 5390 Rubbers
Section Subtitle:: Nitrile (Acrylonitrile Butadiene) - components.
WRAS Approval Number:: 2309505
Expiry date:: 30/09/2028

Approval Holder:: Ar-tex SpA

Company Name
Ar-tex SpA
Address
Via Rasetti 12 24060 Viadanica Bergamo
Country
Italy
Phone
+39 035 939 711
General Email
info@ar-tex.it

View All Listings by this Company