Directory Search Results

Print List

#241002040

Range of wall mounted, thermostatic, shower mixers, (brass bodies - various finishes) incorporating a two-way ceramic disc diverter headwork to control the flow between two shower outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with a dome type operating member. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are supplied with a shower hose, handset and overhead shower.
Size:
3/4" BSP (M) X 1/2" BSP (M) Offset Unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
26 790 xx0 Hansgrohe Croma Select S 280 Showerpipe 26 794 xx0 Hansgrohe Croma Select S 280 Showerpipe EcoSmart 9l 26 890 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet with thermostat and hand shower Raindance Select S 120 3jet 26 891 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet EcoSmart 9 l/min with thermostat and hand shower Raindance Select S 120 3jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#241002071

Range of wall mounted concealed thermostatic blending valves with (brass bodies - various finishes,). The product incorporates a manual diverter valve which can be limited to control the flow between 1, 2 or 3 outlets, a separate thermostatic cartridge controls the temperature. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002071
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The valves are available in 1-, 2- and 3-way versions. The 1 and 2-way valves have a physical stop fitted to limit the diverter rotation and there are the corresponding number of dots on the cover plate. ie Off + 1 dot for the 1-way; Off + 2 dots for the 2-way and Off + 3 dots for the 3-way. The actual valve is the same in all cases.
Size:
3/4" BSP (F) inlets x 1/2" BSP (F) Outlets
Marking:
Tissino on faceplate
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
Concealed valve TTB-100 Thermobox shower valve Face-plate and Handle set TMA-115-P (3 outlet model, chrome) TMA-116-P (1 outlet model, chrome) TMA-117-P (2 outlet model, chrome TLC-202-xx-P (3 outlet model, various finishes) TLC-203-xx-P (1 outlet model, various finishes) TLC-204-xx-P (2 outlet model, various finishes) Where ‘xx’ shown, this denotes the surface finish and can be replaced with any of the following surface finish designations, for example: MN = Matt Black BB = Brushed Brass

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#240602076

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The inlet adaptors for models DT400MX15CP & DT400MX22CP are 90° elbows instead of straight adaptors and incorporate additional integral spherical valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602076
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
IMIX DELTA, CR and size on body. IMIX DELTA on label on cap.
Installation Requirements:
R001 R040 R120
Expiry date:
30/06/2029
Model:
DT40015CP, DT40022CP DT400MX15CP & DT400MX22CP

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#241004024

Range of wall mounted concealed electronically controlled thermostatic shower mixers, incorporating plastic solenoid valves to control the flow to various outlets activated via a remote actuator. The temperature is controlled via two transducers housed within the concealed box. The products incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure: 6.0 bar. Maximum operating temperature: 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241004024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with shower hoses, handsets, riser rails or overhead shower outlets
Size:
½” BSP (M)
Marking:
Sedal
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/10/2029
Model:
CPU iSCU2 TH 20 CPU iSCU2 TH 30 CPU iSCU2 TH 40

Approval Holder:
Sedal S.A
Company Name
Sedal S.A
Address
AV Barcelona 264 08750 Molins De Rei Barcelona
Country
Spain

View All Listings by this Company

Print This Approval


#240702077

Range of gear operated butterfly valves with blue epoxy coated ductile iron bodies. Maximum working pressure 16 Bar Maximum operating temperature 80°C

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
240702077
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN150 – DN1400 Flanged
Marking:
Everfortune, size, PN, and product info on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
D341X

Approval Holder:
Suzhou Everfortune Imp. & Exp. Co., Ltd
Company Name
Suzhou Everfortune Imp. & Exp. Co., Ltd
Address
12/F, International Trade Tower, 1638 Xihuan Road, Suzhou, Jiangsu
Country
China

View All Listings by this Company

Print This Approval


#240904033

Range of wafer and fully lugged butterfly valves with a blue epoxy coated cast iron bodies, EPDM seat and a stainless steel or chrome plated iron disc. Products are either handwheel or gear operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
240904033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
IMI, TA, PN, DN & DATE OF MANUFACTURE YY/MM & FLOW ARROW ON BODY, WRAS, CE & MODEL ON DATAPLATE ON BODY.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
42450 TA-BTV

Approval Holder:
IMI Hydronic Engineering
Company Name
IMI Hydronic Engineering
Address
Route de Crassier 19, CH-1262 Eysins, Switzerland

View All Listings by this Company

Print This Approval


#2201110

Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated, ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2201110
Size:
DN50 to DN600 flanged
Marking:
Oventrop & Business address, WRAS, PN and range on data plate on body. PN and DN on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
166 85 LUGGED SERIES & 166 93 WAFER SERIES BUTTERFLY VALVES SIZE DN 50MM-DN 600MM 166 84 LUGGED SERIES & 166 92 WAFER SERIES BUTTERFLY VALVES SIZE DN 50MM-DN 600MM

Approval Holder:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company

Print This Approval


#250202002

Range of concealed and exposed two-way diverters, (brass bodies – various finishes, trim sets and operating members). The inlets on XX1650YY and XX1721YY models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C (PSA019 YY, PSA020 YY & XX1782YY) Maximum operating temperature 60°C (PSH049, XX1650YY, RZ/1721 & XX1721YY).

Section:
2050 Diverter
Section Subtitle:
Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:
250202002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Compression models are for use with copper pipe (manufactured to BS EN 1057)
Size:
½” BSP (M) (XX1650YYY & XX1721YYY) 19mm compression fitting (XX1782YY)
Marking:
Lefroy Brooks logo on body (XX1782YY) or operating member (XX1650YY & XX1721YY)
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2030
Model:
Exposed PSA019YY PSA020YY Concealed XX1782YY XX1650YY XX1721YY Rough insets only: PSH049 RZ/1721 Where XX denotes the type of trim/operating members and can be replaced with any of the following, as examples: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CR (Black crystal lever) FH (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) TH (Ten Ten handwheel) TL (Ten Ten lever) Where YY denotes the colour/plating options and can be replaced with any of the following as examples: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#241004702

Range of float operated inlet valves incorporating with brass bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2100 Valves
Section Subtitle:
Float operated, equilibrium, metal.
WRAS Approval Number:
241004702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No float supplied
Size:
see models
Marking:
V&G, size, date of manufacture YYYY.MM on body
Installation Requirements:
R001 R280 R350
Expiry date:
31/10/2029
Model:
VG-10172-G15 ½” BSP(M) VG-10172-G20 ¾” BSP (M) VG-10172-G25 1” BSP (M) VG-10172-G32 1-1/4” BSP (M) VG-10172-G40 1-1/2” BSP (M) VG-10172-G50 2” BSP (M)

Manufacturer:
Zhejiang Valogin Technology Co. Ltd.
Company Name
Zhejiang Valogin Technology Co. Ltd.
Address
Qinggang Technological Ind. Zone, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#241002007

Range of regulating and shut-off valves with brass bodies and EPDM ‘O’-Rings. Maximum working pressure 16.0 Bar for BSP (M) and 25.0 bar for BSP (F). Maximum operating temperature 85.0°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
241002007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Male thread DN15 – DN 50 Female thread DN15 – DN50
Marking:
Oventrop logo, flow arrow, PN and DN on body. Oventrop, product name and DN on face plate.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
HydroControl V Double regulating valve, female thread 1062404 - DN15 1062406 - DN20 1062408 - DN25 1062410 - DN32 1062412 - DN40 1062416 - DN50 HydroControl V Double regulating valve, male thread 1062604 - DN15 1062606 - DN20 1062608 - DN25 1062610 - DN32 1062612 - DN40 1062616 - DN50 HydroControl A Shutoff valve, female thread, 1067524 - DN15 1067526 - DN20 1067528 - DN25 1067530 - DN32 1067532 - DN40 1067536 - DN50 HydroControl A Shutoff valve, male thread, 1067624 - DN15 1067626 - DN20 1067628 - DN25 1067630 - DN32 1067632 - DN40 1067636 - DN50 HydroControl M Double regulating valve with metering station, female thread 1065844 - DN15 ULF 1065834 - DN15 LF 1065824 - DN15 MF 1065804 - DN15 1065806 - DN20 1065808 - DN25 1065810 - DN32 1065812 - DN40 1065816 - DN50

Manufacturer:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 414 of 652

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.