Range of heat exchangers connected to copper waste pipe, Where the waste is discharged down a “rotator” into a copper waste pipe, and potable water is returned to the shower/heating device via a copper double walled jacket around the copper waste pipe. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:

1350 Heat Exchangers

Size:

½” BSP (F)

Marking:

Manufacturer ( Builidng Product Distribution) Manufacturer address Type Category BPD Ltd Serial No. Model & other information on Adhesive label.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Showersave: QB1-21C QB1-16C QB1-12C QB1-21 Cyclone QB1-21 QB1-16 QB1-12 QB1-21D QB1-21D HE Models added June 2024 - maximum working pressure of 10.0 bar. QBI-21XE QBI-10XE

Approval Holder:

BPD Limited

Company Name

BPD Limited

Address

View All Listings by this Company

Range of aerators with plastic bodies and chrome plated brass housing. Open outlet use only. Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Size:

SEE MODELS

Marking:

Neoperl on housing

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

01.0412.0 ATOMIZER TT SINGLE-JET 0.25 F M16X1: M16x1 thread 01.0413.0 ATOMIZER TT SINGLE-JET 0.25 M M18X1: M18X1 thread 01.0418.0 ATOMIZER STD TRIPLE-JET M M24X1: M24X1 thread 01.0419.0 ATOMIZER STD TRIPLE-JET F M22X1: M22X1 thread 01.0420.0 ATOMIZER TRIPLE-JET M M24X1.5: M24X1.5 thread 01.0421.0 CACHÉ ATOMIZER M M24X1.5: M24X1.5 thread 01.0424.0 ATOMIZER STD SINGLE-JET F M22X1: M22X1 thread 01.0423.0 ATOMIZER STD SINGLE-JET M M24X1: M24X1 thread 01.0425.0 ATOMIZER STD SINGLE-JET 0.25 M M24X1: M24X1 thread 01.0426.0 ATOMIZER STD SINGLE-JET 0.25 F M22X1: M22X1 thread

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Water control valve with a DZR brass body and EPDM ‘O’-rings. The product incorporates a pressure sensor, ultrasonic sensor, temperature sensor and a motorised spherical valve with a DZR brass ball (chrome plated) and PTFE seats. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2207042

Note:

This product has not been tested or approved for leak detection and automatic shut-off claims made by the approval holder.

Size:

¾” BSP (F) inlet and outlet.

Marking:

TOLLCO on adhesive label on body. CR, Size, flow arrow and HELA on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

2120013 Waterunit - Control (DN20).

Approval Holder:

Tollco AB

Company Name

Tollco AB

Address

View All Listings by this Company

Range of brass (chrome plated) quick fit connectors. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2204088

Note:

Open outlet use only

Size:

See models

Marking:

AQUATOOLS on body.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AT821122 (F), AT821123 ½” BSP (M), AT821124 (M) & AT821125 (M) quick fit connectors

Approval Holder:

AQUATOOLS

Company Name

AQUATOOLS

Address

26 rue Charles Edouard Jeanneret 78300 Poissy

Country

France

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110123

Size:

TPX1-TPX3 models - F (round flange) versions: DN25. TPX5-TPX20 models - F (round flange) versions: DN32-50. TPX1-TPX20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Dutypoint, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

TPX1, TPX3, TPX5, TPX10, TPX15 & TPX20 Range of vertical multistage pumps Code example (TPX range): TPX 20 /15 A B C D E F G H J K L M N PMP/A. Where: TPX = Pump model TPX. 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version. J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): TPX1: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); TPX3: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX5: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX10: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); TPX15: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); TPX20: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

‘3ME’ Range of horizontal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. The products are supplied with a carbon/ceramic/EPDM shaft seal. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2206044

Size:

SUCTION FLANGE (TO DIN 2532): 32-125/160/200 models: DN50, 40-125/160/200 models: DN65, 50-125/160/200 models: DN65, 65-125/160/200 models: DN80. DISCHARGE FLANGE (TO DIN 2532): 32-125/160/200 models: DN32, 40-125/160/200 models: DN40, 50-125/160/200 models: DN50, 65-125/160/200 models: DN65.

Marking:

Ebara, model, CE and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/06/2027

Model:

3ME 32-125/1,1 M (Product code: 1300206600), 3ME 32-160/1,5 M (Product code: 1300206700), 3ME 32-160/2,2 M (Product code: 1300306600), 3ME 40-125/1,5 M (Product code: 1320376600), 3ME 40-125/2,2 M (Product code: 1320276600), 3ME 50-125/2,2 M (Product code: 1330506600), 3ME/I 32-125/1,1 IE3 (Product code: 1300206604I), 3ME/I 32-125/1,1 SCA IE3 (Product code: 1300206504I), 3ME/I 32-125/1,5 SCA IE3 (Product code: 1300206704I), 3ME/I 32-160/1,5 IE3 (Product code: 1300206804I), 3ME/I 32-160/1,5 IE3 SCA (Product code: 1300206904I), 3ME/I 32-160/2,2 IE3 (Product code: 1300306604I), 3ME/I 32-160/2,2 SCA IE3 (Product code: 1300306704I), 3ME/I 32-200/1,1 CARTER IE3 (Product code: 1300206104I), 3ME/I 32-200/1,5 CARTER IE3 (Product code: 1300206114I), 3ME/I 32-200/2,2 CARTER IE3 (Product code: 1300302604I), 3ME/I 32-200/3 IE3 (Product code: 1310406604I), 3ME/I 32-200/3 IE3 SCA (Product code: 1310409604I), 3ME/I 32-200/4 CARTER IE3 (Product code: 1310558704I), 3ME/I 32-200/4 IE3 (Product code: 1310556604I), 3ME/I 32-200/4 SCA (Product code: 1310556704I), 3ME/I 32-200/5,5 IE3 (Product code: 1310756606I), 3ME/I 32-200/5,5 SCA IE3 (Product code: 1310756706I), 3ME/I 32-200/7.5 IE3 (Product code: 1310906604I), 3ME/I 32-200/7.5 IE3 SCA (Product code: 1310906704I), 3ME/I 40-125/1,5 IE3 (Product code: 1320376604I), 3ME/I 40-125/1,5 SCA IE3 (Product code: 1320376704I), 3ME/I 40-125/2,2 IE3 (Product code: 1320276604I), 3ME/I 40-125/2,2 SCA IE3 (Product code: 1320276704I), 3ME/I 40-160/3 IE3 (Product code: 1320406604I), 3ME/I 40-160/3 SCA IE3 (Product code: 1320406704I), 3ME/I 40-160/4 IE3 (Product code: 1320556604I), 3ME/I 40-160/4 SCA IE3 (Product code: 1320556704I), 3ME/I 40-200/11 IE3 EN (Product code: 1330916606I), 3ME/I 40-200/11 SCA IE3 (Product code: 1330916706I), 3ME/I 40-200/3 CARTER IE3 (Product code: 1320402704I), 3ME/I 40-200/4 CARTER IE3 (Product code: 1320556504I), 3ME/I 40-200/5,5 IE3 EN (Product code: 1330756604I), 3ME/I 40-200/5,5 SCA IE3 (Product code: 1330756904I), 3ME/I 40-200/7,5 IE3 (Product code: 1330906604I), 3ME/I 40-200/7,5 SCA IE3 (Product code: 1330906704I), 3ME/I 50-125/2,2 IE3 (Product code: 1330506604I), 3ME/I 50-125/2,2 SCA IE3 (Product code: 1330506704I), ME/I 50-125/3 (126) (Product code: 6130002990:), 3ME/I 50-125/3 IE3 (Product code: 1330556604I), 3ME/I 50-125/3 SCA IE3(Product code: 1330556704I), 3ME/I 50-125/3R (D126) (Product code: 1330556404I), 3ME/I 50-125/4 IE3 (Product code: 1330406604I), 3ME/I 50-125/4 SCA IE3 (Product code: 1330406704I), 3ME/I 50-160/5,5 230/400_50 IE3 (Product code: 1330902504I), 3ME/I 50-160/5,5 IE3 EN (Product code: 1330906606I), 3ME/I 50-160/5,5 SCA IE3 (Product code: 1330906706I), 3ME/I 50-160/7,5 IE3 (Product code: 1330896606I), 3ME/I 50-160/7,5 R154 IE3 (Product code: 1330896806I), 3ME/I 50-160/7,5 SCA IE3 (Product code: 1330896706I), 3ME/I 50-200/11 IE3 (Product code: 1330966606I), 3ME/I 50-200/11 IE3 STAC (Product code: 1330964006I), 3ME/I 50-200/11 SCA IE3 (Product code: 1330966706I), 3ME/I 50-200/116 380-460/660SCA (Product code: 1330966716I), 3ME/I 50-200/15 IE3 (Product code: 1330986606I), 3ME/I 50-200/15 SCA IE3 (Product code: 1330986706I), 3ME/I 50-200/5,5 CARTER IE3 (Product code: 1330906106I), 3ME/I 50-200/7,5 CARTER IE3 (Product code: 1330890206I), 3ME/I 50-200/9,2 IE3 (Product code: 1330976606I), 3ME/I 50-200/9,2 SCA IE3 (Product code: 1330976706I), 3ME/I 65-125/4 IE3 (Product code: 1344126604I), 3ME/I 65-125/4 SCA IE3 (Product code: 1344126804I), 3ME/I 65-125/5,5 IE3 (Product code: 1344136604I), 3ME/I 65-125/5,5 SCA IE3 (Product code: 1344136704I), 3ME/I 65-125/5.5R (D128) (Product code: 1344136404I), 3ME/I 65-125/7,5 230/400_50 IE3 (Product code: 1344146606I), 3ME/I 65-125/7,5 IE3 (Product code: 1344146604I), 3ME/I 65-125/7,5 SCA IE3 (Product code: 1344146804I), 3ME/I 65-125/7.5R (D138) (Product code: 1344146404I), 3ME/I 65-160/11 IE3 (Product code: 1345166604I), 3ME/I 65-160/11 SCA (Product code: 1345166704I), 3ME/I 65-160/15 IE3 (Product code: 1345176604I), 3ME/I 65-160/15 IE3 (Product code: 1345176704I), 3ME/I 65-160/7,5 IE3 (Product code: 1345146604I), 3ME/I 65-160/7,5 SCA IE3 (Product code: 1345146704I), 3ME/I 65-160/9,2 IE3 (Product code: 1345156604I), 3ME/I 65-160/9,2 SCA IE3 (Product code: 1345156704I), 3ME/I 65-200/15 IE3 (Product code: 1346176604I), 3ME/I 65-200/15 SCA IE3 (Product code: 1346176704I), 3ME/I 65-200/18,5 IE3 (Product code: 1346186604I), 3ME/I 65-200/18,5 IE3 SCA (Product code: 1346186704I), 3ME/I 65-200/22 IE3 (Product code: 1346196604I), 3ME/I 65-200/22 IE3 STAC (Product code: 1346193904I), 3ME/I 65-200/22 SCA IE3 (Product code: 1346196704I).

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Range of vertical multistage booster pumps, with stainless steel bodies and impellors. Maximum working pressure: See models Maximum working temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2205095

Size:

See Models

Marking:

Stuart Turner, CE, Max Temperature and other Technical info on Data Plates

Installation Requirements:

R001 R415

Expiry date:

31/05/2027

Model:

VM(.) 1 >> Size from 2 to 39 stages VM(.) 3 >> Size from 2 to 33 stages VM(.) 5 >> Size from 2 to 27 stages VM(.) 10 >> Size from 2 to 23 stages VM(.) 15 >> Size from 1 to 17 stages VM(.) 20 >> Size from 1 to 16 stages VM(.) 32 >> Size from 1 to 14 stages VM(.) 45 >> Size from 1 to 13 stages VM(.) 64 >> Size from 1 to 8 stages VM(.) 90 >> Size from 1 to 6 stages ( ) = VM >> AISI304 Components (L) = VM >> AISI316L Components (K*) = VM>> AISI304 + PRESSURE SENSOR (LK*) = VM >> AISI316L + PRESSURE SENSOR *K1 = DANFOSS MBS1900 *K2 = DANFOSS DST P 140 *K3 =SCHNEIDER XMLP0xxBD21F VM(.) 1-3 >> Available with Oval flange G1, Round Flange DN25, Loose round flange DN25, Victaulic DN32 and Clamp Ø59 VM(.) 5 >> Available with Oval flange G1¼, Round Flange DN32, Loose round flange DN32, Victaulic DN32 and Clamp Ø59. VM(.) 10 >> Available with Oval flange G1½, Round Flange DN40, Loose round flange DN40, Victaulic DN50 and Clamp Ø87. VM(.) 15-20 >> Available with Oval flange G2, Round Flange DN50, Loose round flange DN50, Victaulic DN50 and Clamp Ø87. VM(.) 32 >> Available with Loose round flange DN65. VM(.) 45 >> Available with Loose round flange DN80. VM(.) 64-90 >> Available with Loose round flange DN100. Model Bar VM( )1 2 16 VM( )1 3 16 VM( )1 4 16 VM( )1 5 16 VM( )1 6 16 VM( )1 7 16 VM( )1 8 16 VM( )1 9 16 VM( )1 10 16 VM( )1 11 16 VM( )1 12 16 VM()1 13 16 VM(L)1 14 16 VM( )1 16 16 VM( )1 18 16 VM( )1 20 16 VM( )1 22 16 VM( )1 24 16 VM( )1 26 16 VM( )1 27 25 VM( )1 29 25 VM( )1 32 25 VM( )1 34 25 VM( )1( 37 25 VM( )1 39 25 VM( )3 2 16 VM( )3 3 16 VM( )3 4 16 VM( )3 5 16 VM( )3 6 16 VM( )3 7 16 VM( )3 8 16 VM( )3 9 16 VM( )3 10 16 VM( )3 11 16 VM( )3 12 16 VM( )3 13 16 VM( )3 14 16 VM( )3 15 16 VM( )3 16 16 VM( )3 17 16 VM( )3 19 16 VM( )3 21 16 VM( )3 23 25 VM( )3 25 25 VM( )3 27 25 VM( )3 29 25 VM( )3 31 25 VM( )3 33 25 VM( )5 2 16 VM( )5 3 16 VM( )5 4 16 VM( )5 5 16 VM( )5 6 16 VM( )5 7 16 VM( )5 8 16 VM( )5 9 16 VM( )5 10 16 VM( )5 11 16 VM( )5 12 16 VM( )5 13 16 VM( )5 14 16 VM( )5 15 16 VM( )5 17 16 VM( )5 19 25 VM( )5 20 25 VM( )5 23 25 VM( )5 25 25 VM( )5 27 25 VM( )10 2 16 VM( )10 3 16 VM( )10 4 16 VM( )10 5 16 VM( )10 6 16 VM( )10 7 16 VM( )10 8 16 VM( )10 9 16 VM( )10 10 16 VM( )10 11 16 VM( )10 12 16 VM( )10 14 16 VM( )10 15 16 VM( )10 16 25 VM( )10 18 25 VM( )10 19 25 VM( )10 21 25 VM(L)10 22 25 VM( )10 23 25 VM( )15 1 16 VM( )15 2 16 VM( )15 3 16 VM( )15 4 16 VM( )15 5 16 VM( )15 6 16 VM( )15 7 16 VM( )15 8 16 VM( )15 9 16 VM( )15 10 16 VM( )15 11 16 VM( )15 12 25 VM( )15 13 25 VM( )15 15 25 VM( )15 17 25 VM()20 1 16 VM( L)20 2 16 VM( )20 3 16 VM( )20 4 16 VM( )20 5 16 VM( )20 6 16 VM( )20 7 16 VM( )20 8 16 VM( )20 9 16 VM( )20 10 25 VM( )20 11 25 VM( )20 12 25 VM( )20 13 25 VM( )20 14 25 VM( )20 15 25 VM( )20 16 25 VM( )32 1-1 16EVMS( )32 1-0 16 VM( )32 2-2 16 VM( )32 2-0 16 VM( )32 3-2 16 VM( )32 3-0 16 VM( )32 4-2 16 VM( )32 4-0 16 VM( )32 5-2 16 VM( )32 5-0 16 VM( )32 6-2 16 VM( )32 6-0 16 VM( )32 7-2 16 VM( )32 7-0 16 VM( )32 8-2 25 VM( )32 8-0 25 VM( )32 9-2 25 VM( )32 9-1 25 VM( )32 10-2 25 VM( )32 10-0 25 VM( )32 11-2 25 VM( )32 11-1 25 VM(L)32 12-2 30 VM(L)32 12-0 30 VM( )32 13-2 30 VM( )32 13-0 30 VM( )32 14-2 30 VM( )32 14-0 30 VM( )45 1-1 16 VM( )45 1-0 16 VM( )45 2-2 16 VM( )45 2-0 16 VM( )45 3-2 16 VM( )45 3-0 16 VM( )45 4-2 16 VM( )45 4-0 16 VM( )45 5-2 16 VM( )45 5-0 16 VM( )45 6-2 25 VM( )45 6-0 25 VM( )45 7-2 25 VM( )45 7-0 25 VM( )45 8-2 25 VM( )45 8-0 25 VM( )45 9-2 25 VM( )45 9-0 25 VM( )45 10-2 35 VM( )45 10-0 35 VM( )45 11-2 35 VM( )45 11-0 35 VM( )45 12-2 35 VM( )45 12-0 35 VM( )45 13-2 35 VM( )64 1-1 16 VM( )64 1-0 16 VM( )64 2-2 16 VM( )64 2-1 16 VM( )64 2-0 16 VM( )64 3-2 16 VM( )64 3-1 16 VM( )64 3-0 16 VM( )64 4-2 16 VM( )64 4-1 16 VM( )64 4-0 16 VM( )64 5-2 16 VM( )64 5-1 16 VM( )64 5-0 16 VM( )64 6-2 25 VM( )64 6-1 25 VM( )64 6-0 25 VM( )64 7-2 25 VM( )64 7-1 25 VM( )64 7-0 25 VM( )64 8-2 25 VM( )64 8-1 25 VM( )90 1-1 16 VM( )90 1-0 16 VM( )90 2-2 16 VM(L)90 2-0 16 VM(L)90 3-2 16 VM(L)90 3-0 16 VM(L)90 4-2 16 VM( )90 4-0 16 VM( )90 5-2 25 VM( )90 5-0 25 VM( )90 6-2 25 VM( )90 6-0 25

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of shower handsets with chrome plated plastic bodies and EPDM O-rings. The inlets incorporate a plastic strainer. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207060

Size:

½” BSP (M)

Marking:

Hansgrohe on base of body

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

28 558 XXX Hansgrohe PuraVida Baton hand shower 120 1jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 =PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of bonze bodied Y strainers with stainless steel mesh and PTFE gaskets. Maximum working pressure 20.0 Bar Maximum operating temperature 100.0°C

Section:

1715 Strainers

Size:

½” BSP (F) ¾” BSP (F) 1” BSP (F) 1 ¼” BSP (F) 1 ½” BSP (F) 2” BSP (F)

Marking:

TYNE, flow arrow, size and PN on body

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

71201015 71201020 71201025 71201032 71201040 71201050

Approval Holder:

Tyne Flow Ltd

Company Name

Tyne Flow Ltd

Address

411-422 Coventry Rd 1st Small Heath Birmingham

Country

UK

View All Listings by this Company

Manufacturer:

Tyne Flow Ltd

Company Name

Tyne Flow Ltd

Address

411-422 Coventry Rd 1st Small Heath Birmingham

Country

UK

View All Listings by this Company

Range of pillar taps incorporating brass bodies (chrome plated), and quarter turn ceramic disc headowks. The spout outlet incorporates a flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2104350

Size:

See model

Marking:

INSTINCT ON OPERATING MEMBER

Installation Requirements:

R001 R005

Expiry date:

30/04/2026

Model:

4E6000 - S12 Curve Basin Tap Pair– ½” BSP (M) 4E6001 - S12 Curve Bath Tap Pair – ¾” BSP (M) 4E6009 - S12 Square Basin Tap Pair – ½” BSP (M) 4E6010 - S12 Squarebath Tap Pair – ¾” BSP (M)

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company