Directory Search Results

Print List

#240202711

‘G5 C’ command centre providing chilled (filtered) water via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202711
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R150 R170
Expiry date:
28/02/2029
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50011000UK - G5 C100 M.
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval


#240202712

‘G5 CS’ command centre providing chilled or chilled sparkling water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The product incorporates a pressure reducing valve (adjustable outlet pressure between 2.25 and 2.75 bar) on the supply to the carbonator unit. The carbonator inlet incorporates a non-return valve. The product is supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202712
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R160 R170 R415
Expiry date:
28/02/2029
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains model: H50065000UK - G5 CS100 M.

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval


#240204034

Floor mounted, single hole, single outlet (fixed) combination tap assembly (brass bodies - in various finishes), incorporating a ceramic cartridge headwork with a single lever operating member, a manual diverter to shower outlet and a waterfall type spout. Shower hose and handset is not supplied with this product. Maximum working pressure 10.0bar. Maximum operating temperature 60°C.

Section:
0463 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
240204034
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connections.
Marking:
Lanbiao etched on operating member.
Installation Requirements:
R001 R020 R160
Expiry date:
28/02/2029
Model:
F9903-** -**Represents the following different surface treatments: H-Black N- Nickel Brushed GJS- Zirconium gold brushed G- Zirconium gold QTSL- Brushed bronze bright QTS-Brushed Bronze Matte TJ- Titanium TJLS- Titanium brushed MGJ- Rose gold MGJL- Rose gold brushed HGT- Red bronze HTL- Brushed brass HTS- Brushed copper PVDQH-Gun Ash HQ-Gun Ash Brushed Q-Bronze DYB-Electrophoresis Matt White STS-Acid copper brushed BZ-Spray pearl white B-Spray matt white

Approval Holder:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company
Manufacturer:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company

Print This Approval


#240404016

Floor mounted, single hole, single outlet (swivel) combination tap assembly (brass bodies - in various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working Pressure 10 bar. Maximum operating Temperature 60 °C

Section:
0463 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
240404016
Size:
½” BSP (F)
Marking:
Crosswater X logo on body
Installation Requirements:
R001 R020
Expiry date:
30/04/2029
Model:
MPRO Range PRO416Fx Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate
Product Images

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#240202041

Range of single-hole, single outlet (fixed) electronically controlled combination tap assemblies (brass bodies – chrome plated). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating on the side of the body. The spout outlets incorporate plastic flow straighteners. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The products are supplied with single lever spherical valves. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240202041
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Delabie on operating member
Installation Requirements:
R001 R006 R009 R040
Expiry date:
28/02/2029
Model:
44900015 44900115 44900615 49900015 49900115 49900615
Product Images

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 395 of 559

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.