Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309384

Size:

See model.

Marking:

Lawton tubes logo, EN1254 and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

SB-EFCOMI0151/2 CORE 15mm X 1/2" Male Adaptor Brass N3015 SB-EFCOMI0153/4 CORE 15mm X 3/4" Male Adaptor Brass SB-EFCOMI0223/4 CORE 22mm X 3/4" Male Adaptor Brass N3022 SB-EFCOMI0281 CORE 28mm X 1" Male Adaptor Brass N3028 SB-EFCOMI03511/4 CORE 35mm X 1.1/4" Male Adaptor Brass SB-EFCOMI04211/2 CORE 42mm X 1.1/2" Male Adaptor Brass SB-EFCOMI0542 CORE 54mm X 2" Male Adaptor Brass SB-EFCP015 CORE 15mm Coupler EF N1015 SB-EFCP022 CORE 22mm Coupler EF N1022 SB-EFCP028 CORE 28mm Coupler EF N1028 SB-EFCP035 CORE 35mm Coupler EF SB-EFCP042 CORE 42mm Coupler EF SB-EFCP054 CORE 54mm Coupler EF SB-EFCP06 CORE 66.7mm Coupler EF SB-EFCP076 CORE 76.1mm Coupler EF SB-EFCP108 CORE 108mm Coupler EF SB-EFEC015 CORE 15mm End Cap EF N61015 SB-EFEL015 CORE 15mm 90° Elbow EF N12015 SB-EFEL022 CORE 22mm 90° Elbow EF N12022 SB-EFEL028 CORE 28mm 90° Elbow EF N12028 SB-EFEL035 CORE 35mm 90° Elbow EF N12035 SB-EFEL042 CORE 42mm 90° Elbow EF SB-EFEL054 CORE 54mm 90° Elbow EF SB-EFEL067 CORE 66.7mm 90° Elbow EF SB-EFEL076 CORE 76.1mm 90° Elbow EF SB-EFEL108 CORE 108mm 90° Elbow EF SB-EFELS015 CORE 15mm 90° Street Elbow EF N12S015 SB-EFELS022 CORE 22mm 90° Street Elbow EF N12S022 SB-EFRED02215 CORE 22mm X 15mm Fitting Reducer EF N6022015 SB-EFRED02822 CORE 28mm X 22mm Fitting Reducer EF N6028022 SB-EFTE015 CORE 15mm Equal Tee EF N24015 SB-EFTE022 CORE 22mm Equal Tee EF N24022 SB-EFTE028 CORE 28mm Equal Tee EF SB-EFTE035 CORE 35mm Equal Tee EF SB-EFTE042 CORE 42mm Equal Tee EF SB-EFTE054 CORE 54mm Equal Tee EF SB-EFTE067 CORE 66.7mm Equal Tee EF SB-EFTE076 CORE 76.1mm Equal Tee EF SB-EFTE108 CORE 108mm Equal Tee EF SB-EFTE0221522 CORE 22mm X 15mm X 22mm Reducer Tee EF N26022015022 SB-EFTE0222215 CORE 22mm X 22mm X 15mm Reducer Tee EF N25022015

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Manufacturer:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

Electric instantaneous, vented, mains water heater. Maximum operating temperature 98°C. Cold supply only.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250604707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Ellsi, model, technical data on adhesive label on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

PDT-000930.

Product Images

Approval Holder:

Ellsi Limited

Company Name

Ellsi Limited

Postcode

DN15 8SL

Country

United Kingdom

General Email

martin@ellsi.co.uk

View All Listings by this Company

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:

1390 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, open outlet.

WRAS Approval Number:

250504712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M)

Marking:

Midea logo on body. Midea logo, Capacity, Model No.,Pressure, Other tech info on data label on body

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Da-bcd a = Volume (available in 10, 15 & 30), b = Rated power (available in 20 & 30, 20 stands for 2kW, 30 for 3kW), c = Cover type (available in VD, VD2 & VD3), d = Installation position (available in O & U, O stands for over sink, U stands for under sink) Where a typical code is: ①D10-20VDO: 10 = volume (L) 20 = rated power (2kW) VD = the type of cover O = over sink range ②D30-30VD3U: 30 = volume (L) 30 = rated power (3kW) VD3 = the type of cover U = under sink range

Product Images

Approval Holder:

Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.

Company Name

Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.

Address

Wanchun East Road Economic and Technological Development Zone Wuhu City Anhui Province

Country

China

View All Listings by this Company

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:

1390 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, open outlet.

WRAS Approval Number:

250504715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M)

Marking:

Flomasta on body & week of manufacture & other tech info on data label.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

D10-20VD3 (5063022583697) 10L 2kw VD3 cover D15-20VD3 (5063022583680) 15L 2kw VD3 cover D15-30VD3 (5063022583710) 15L 3kw VD3 cover D30-30VD3 (5063022583703) 30L 3kw VD3 cover

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. Some models, please refer to model below, incorporate only a primary circuit. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 60°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

250602716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Warmhaus on front panel. Warmhaus, product name and operating info on label on side panel

Installation Requirements:

R001 R140 R360

Expiry date:

30/06/2030

Model:

Following models are ¾” BSP M inlet/outlet primary circuit, ½” BSP M inlet/outlet secondary circuit. KM0725250101005901 EWA 2525C 25KW KM0725300101005901 EWA 2530 C 30 KW KM0725310303008701 MINERWA 25/31 COMBI BOILER IE (BLACK) KM0725300201008901 ENERWA PLUS 2530 C - UK KM0325300201001301 ENERWA PLUS 2530 C - UK + FLUE KIT KM0730350201008901 ENERWA PLUS 3035 C - UK KM0330350201001301 ENERWA PLUS 3035 C + F.KIT - DHW 35 - UK KM0735400201008901 ENERWA PLUS 3540 C - UK KM0335400201001301 ENERWA PLUS 3540 C - UK KOMBI KM0742400201001301 ENERWA PLUS 4240 C 40 KW - UK KM0745430201001301 ENERWA PLUS 4543 C 43 KW - UK KM0725310303009801 EXP.MINERWA 25 SYSTEM BOLER (BLACK) KM1220240101012201 GLOWA 2024 KM1224260101012201 GLOWA 2426 KM1228300101012201 GLOWA 2830 KM1233350101012201 GLOWA 3335 KM1220240101012401 GLOWA SMART 20/24 20KW KM1224260101012401 GLOWA SMART 24/26 24KW KM1228300101012401 GLOWA SMART 28/30 28KW KM1233350101012401 GLOWA SMART 33/35 33KW Following models are ¾” BSP M inlet/outlet and are primary circuit only KM1024000201005501 EXP.ENERWA PLUS H.O 2500H KM1024000201010201 EXP. WARMHAUS ENERWA PLUS H.O 2500H - UK KM1028000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3000H KM1028000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3000H - UK KM1033000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H KM1033000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3500H - UK KM1133000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H+F.KIT KM1133000201006201 EXP.WARMHAUS ENERWAPLUS HO 3500H-D+F.KIT KM1142000201005501 ENERWA PLUS H.O 4200H KM1145000201005501 ENERWA PLUS H.O 4500H KM1220000101012301 GLOWA 20 H.O. KM1224000101012301 GLOWA 24 H.O. KM1228000101012301 GLOWA 28 H.O. KM1233000101012301 GLOWA 33 H.O.

Product Images

Manufacturer:

Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.

Company Name

Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.

Address

Nilufer Organise Sanayi Bolgesi Selvi Cad No:3 Nilufer Bursa Turkey

Phone

+90-224-2959400

View All Listings by this Company