Directory Search Results

Print List

#240204061

Range of water meter housings incorporating DZR brass bodies and a check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
MWM, flow arrow CR on body.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
WBBADAPT112-15: 15mm compression, WBBADAPT112-22: 22mm compression, WBBADAPT112-F: ¾” BSP (F).

Approval Holder:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#240204050

Range of wall & floor mounted, two hole, single outlet combination tap assemblies with brass bodies incorporating ceramic cartridge headworks with single lever operating members. Spout incorporates a plastic aerator. Products also incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M).
Marking:
Gessi on handle.
Installation Requirements:
R001 R010 R030
Expiry date:
28/02/2029
Model:
65113 (wall mounted), 65128 (floor mounted) + 65099 (floor mounting plate / roughing set).

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#240208003

Range of flow sensors with plastic bodies and rotors. Maximum working pressure: 10 Bar. Maximum operating temperature: 80°C.

Section:
1530 Miscellaneous Fittings
Size:
See model.
Marking:
Resideo, Model, Max temperature, Max pressure & made in Japan on the front face.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
C7195A 2001 – 1/2” BSP (M). C7195B 1001 – 3/4” BSP (M). C7195C 1009 – cartridge only, to be inserted in a ø25.2 mm manifold.

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

Print This Approval


#240206001

Range of stainless steel bodied mechanical pump shaft seals. The 491 model comprises of carbon and silicone carbide seal faces and EPDM ‘O’-rings. The 1510 model comprises of carbon and silicone carbide seal faces, EPDM ‘O’-rings and an orange NBR/aramid fibre gasket. Maximum operating temperature 100°C.

Section:
1530 Miscellaneous Fittings
Size:
491: 16 - 110mm. 1510: 25 - 120mm.
Marking:
491: Chesterton on body. 1510: Chesterton on tabs.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
491 - Chesterton 491 DINS-DINL rotary internal single seal. 1510 - Chesterton 1510 General Duty Single Cartridge Seal with orange NBR/aramid fibre Gasket.
Product Images

Approval Holder:
Chesterton International GmbH
Company Name
Chesterton International GmbH
Address
Am Lenzenfleck 23, DE-85737 Ismaning
Country
Germany

View All Listings by this Company

Print This Approval


#240504017

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose. Model (5840/MBG/W) is supplied with a single lever trim set. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240504017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
THG laser etched on wall mounted bracket
Installation Requirements:
R001 R070 R415
Expiry date:
31/05/2029
Model:
5840/9/W & 5840/MBG/W
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 386 of 559

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.