Range of in-line pilot operated control valves with blue epoxy coated ductile iron bodies, having rate of flow control facility controlled via a pilot system. Spring ratings of pilot valve are 2 to 20 psi / 0.138 to 1.38 bar, 25 to 50 psi / 1.72 to 3.4 bar. Maximum working pressure 16.0 Bar Maximum operating temperature 60.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250902715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Model 106-RF – DN15 to DN900 Flanged Model 206-RF – DN80 to DN1200 Flanged Model 306-RF – DN50 to DN400 Flanged

Marking:

Singer, flow arrow & size & body. Singer, model and product info on data plate

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Model 106-RF Model 206-RF Model 306-RF

Approval Holder:

Henry Pratt Company LLC – DBA Singer Valve

Company Name

Henry Pratt Company LLC – DBA Singer Valve

Address

1200 Abernathy Rd NE Suite 1200, Atlanta, GA 30328, USA

View All Listings by this Company

'PENTANOL DI 8055 BLACK'. Factory applied, black coloured Bitumen based coating. Apply as per manufacturer's TDS 'January HD 2024'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250955022

Expiry date:

30/09/2030

Approval Holder:

Grauer & Weil India Ltd.

Company Name

Grauer & Weil India Ltd.

Address

Growel Corporate, Akruli Road, Kandivali (East), Mumbai 400001

Country

India

View All Listings by this Company

'Ecocoat FBE Green Powder PFC/6018 (RAL 6018)& Ecocoat FBE Red Oxide Powder PFC/3000-Red Oxide'. Factory applied, green or red coloured epoxy coatings. Apply as per manufacturer’s Product Data Sheet revised ‘1st Jan, 2024’. Cure for 3 minutes at a metal temperature of 230°C. For use with water up to 85°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250855022

Expiry date:

31/08/2030

Approval Holder:

Par Ferro Coatings Pvt. Ltd.

Company Name

Par Ferro Coatings Pvt. Ltd.

Address

129, Matheswartala Road, Kolkata - 700046, West Bengal

Country

India

View All Listings by this Company

'Belzona 1111 (Super Metal)'. Grey coloured, site applied, two-component epoxy coating. Mix Part A (dark grey, opaque paste) with Part B (light grey, opaque paste) in a 5:1 weight ratio and apply as per manufacturers IFU ’02-07-23’. Cure for 1 day@30°C or 5 days at 5 °C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250855034

Expiry date:

31/08/2030

Approval Holder:

Belzona Limited

Company Name

Belzona Limited

Address

Claro Road, Harrogate, Yorks.

Postcode

HG1 4AY

Phone

+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

'Belzona 1331'. Grey coloured, site applied, two-component epoxy coating. First coat: Mix Belzona 1331 (white, opaque paste) parts A & B in a weight ratio of 2.2:1 and apply as per manufacturer’s IFU ’06-03-19’. Cure for 6-8 hours@10°C or 3-4 hours@30°C then apply: Second coat: Mix Belzona 1331 (grey, opaque paste) parts A & B in a weight ratio of 2.2:1 and apply as per manufacturer’s IFU ’06-03-19’. Cure in accordance with manufacturer’s IFU ’06-03-19’, ‘Completion of the Molecular Reaction’ table, ‘Full mechanical/thermal loading or water immersion’. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250855035

Expiry date:

31/08/2030

Approval Holder:

Belzona Limited

Company Name

Belzona Limited

Address

Claro Road, Harrogate, Yorks.

Postcode

HG1 4AY

Phone

+44 1423 567641 Fax: 01423 505967

View All Listings by this Company