Directory Search Results

Print List

#2111364

Greenstar Heatslave II range of floor standing oil-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system, which incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The cold water inlet incorporates a screwdriver operated spherical valve followed by a plastic flow regulator inserted within the pipework. Maximum working pressure: Primary circuit 2.5 bar. Secondary circuit 10.0 bar. Maximum operating temperature 82°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2111364
Size:
Primary: 28mm copper tail (25/32 models), 22mm copper tail (all other models). Secondary: 15mm inlet x 22mm copper tail outlet.
Marking:
Worcester (brand of Bosch Thermotechnology Ltd) and Worcester logo on front casing. Data label, Worcester and technical information on inside cover.
Installation Requirements:
R001 R140 R360 R430
Expiry date:
30/11/2026
Model:
7 731 600 165 Greenstar Heatslave II 12/18 ErP+, 7 731 600 166 Greenstar Heatslave II 18/25 ErP+, 7 731 600 167 Greenstar Heatslave II 25/32 ErP+, 7 731 600 168 Greenstar Heatslave II EXT 12/18 ErP+, 7 731 600 169 Greenstar Heatslave II EXT 18/25 ErP+, 7 731 600 170 Greenstar Heatslave II EXT 25/32 ErP+, 7 731 600 260 Greenstar Heatslave II 12/18 2022+, 7 731 600 261 Greenstar Heatslave II 18/25 2022+, 7 731 600 262 Greenstar Heatslave II 25/32 2022+, 7 731 600 263 Greenstar Heatslave II EXT 12/18 2022+, 7 731 600 264 Greenstar Heatslave II EXT 18/25 2022+, 7 731 600 265 Greenstar Heatslave II EXT 25/32 2022+.
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Bosch Thermotechnology Ltd.
Company Name
Bosch Thermotechnology Ltd.
Address
Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire
Postcode
S45 9BY
General Email

View All Listings by this Company

Print This Approval


#2111310

Hydraulic block assembly comprising a flow sensor, primary pump assembly, pressure relief valve preset at 3.0 bar and plate heat exchanger. Maximum working pressures: secondary = 10.0 bar and primary = 2.5 bar. Maximum operating temperature 80°C.

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2111310
Size:
Primary: ¾” captive nut. Secondary: ½” captive nut
Marking:
Bosch, model number and WRAS approved on adhesive label on circulating pump.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
8 718 687 771
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#2112344

MJ (Multi jet) range of water meters with either ductile iron (MJF model) or brass (MJ models) blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
Delta Flowtech web address, WRAS approved and other technical info on dial. Flow arrow & size on body.
Installation Requirements:
R001 R120
Expiry date:
31/12/2026
Model:
D15MJ – ¾” BSP (M). D20MJ – 1” BSP (M). D25MJ – 1 ¼” BSP (M). D32MJ – 1 ½” BSP (M). D40MJ – 2” BSP (M). D50MJ – 2 ½” BSP (M). D50MJF – DN50 flange.
Product Images

Approval Holder:
Delta Flowtech
Company Name
Delta Flowtech
Address
Bridge House, Riverside North, Bewdley
Postcode
DY12 1AB
Country
Worcestershire

View All Listings by this Company
Manufacturer:
Delta Flowtech
Company Name
Delta Flowtech
Address
Bridge House, Riverside North, Bewdley
Postcode
DY12 1AB
Country
Worcestershire

View All Listings by this Company

Print This Approval


#2112037

Range of ‘Resident Valves’ with a DZR brass body consisting of water meter manifold, an isolation valve on the inlet, a pressure reducing valve (adjustable between 1.5 and 6.0 bar) and 2 non-return valves which are located on the outlet of the water meter manifold. The ‘Plus’ models are also supplied with an isolation valve on the outlet, which incorporates a drain tap. Maximum supply pressure 16.0 Bar. Cold water above ground use only.

Section:
1510 Water Meter Manifolds
Size:
See model.
Marking:
Main body: Pegler (Pegler is a brand of Aalberts integrated piping systems Ltd.), Pegler logo, flow arrow, size, pressure and CR on body. Isolation valve: Pegler and Pegler logo, CR and PN on body.
Installation Requirements:
R001 R120 R511
Expiry date:
31/12/2026
Model:
Pegler RES1 Resident Valve 3/4x1 MF (5A3001): ¾” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES1 Resident Valve 1X1 MF (5A3002): 1” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES2 Resident Valve Plus 3/4 FF (5A3021): ¾” BSP (F) inlet/outlet. Pegler RES2 Resident Valve Plus 1 FF (5A3022): 1” BSP (F) inlet/outlet.
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2110339

Range of meter boxes incorporating a plastic manifold arrangement consisting of a stop valve with non-rising spindle , check valve (however the complete assembly has not been tested to demonstrate it provides adequate backflow) and concentric meter port. Some models incorporate a drain off or blacking plug. Connections can be compression or push fit (see model). For use with PE8-0 pipe to BS EN 12201 and copper to EN 1057. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1525 Meter Chambers - Wall Mounted
Size:
see model
Marking:
Talis logo, Talbot, flow arrow, pressure, inlet & outlet on body.
Installation Requirements:
R001 R430
Expiry date:
31/10/2026
Model:
Drain off model: WA3261515AM – 15mm x 15mm WA3261522AM – 15mm x 22mm WA3262215AM – 22mm x 15mm WA3262222AM – 22mm x 22mm WA3262515AM – 25mm p/f x 15mm WA3262522AM – 25mm p/f x 15mm Blanking plug model: WA3271515BM – 15mm x 15mm WA3271522BM – 15mm x 22mm WA3272215BM - 22mm x 15mm WA3272222BM – 22mm x 22mm WA3272515BM – 25mm p/f x 15mm WA3272522BM – 25mm p/f x 22mm
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 39 of 189

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.