Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2007389

Range of pressure relief valves incorporating brass bodies and EPDM rubber washers. The valves incorporate a manually operated rotational easing gear. For maximum working pressure please refer to model. Maximum operating temperature 99°C.

Section:: 2210 Valves
Section Subtitle:: Pressure relief.
WRAS Approval Number:: 2007389
Note:: For closed circuit use only.
Size:: See model
Marking:: SIZE & flow arrow on body. RWC, Date of manufacture (DD/MM/YYYY) & product information on cap.
Installation Requirements:: R001 R200
Expiry date:: 31/07/2025
Model:: PREL107010: ½” BSP (F) x ½ BSP (F) – 6.0 bar.

Approval Holder:: RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #2012360

Range of normally closed solenoid valves with a plastic body and silicone rubber diaphragm & ‘O’-rings. Models ending ‘007’ have a maximum working pressure of 0.25 bar. All other models have a maximum working pressure of 0.06 bar. Maximum operating temperature 90°C.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 2012360
Size:: 12mm O.D. x 10.07mm O.D. spigot. 15.04mm O.D. x 15.08mm O.D. spigot. 18.98mm O.D. x 17mm O.D. spigot.
Marking:: A.u.K Müller, model type, date of manufacture (WW/YY) and other technical information on coil. A.u.K Müller logo on body.
Installation Requirements:: R001 R008
Expiry date:: 31/12/2025
Model:: 40.006.111. 40.008.111. 40.012.111. 46.006.111. 46.008.111. 40.006.114. 40.008.114. 46.006.114. 46.008.114. 40.006.116. 40.008.116. 46.006.116. 46.008.116. 40.006.117. 40.008.117. 46.006.117. 46.008.117. 46.008.118. 40.008.101. 40.012.101. 46.008.101. 40.008.151. 46.008.151. 40.012.151. 40.008.104. 46.008.104. 40.008.154. 46.008.154. 40.012.191. 40.014.111. Where: 40 = solenoid type, either MS.026 for 40.006/008.XXX models, or MS.006 for 40.012/014.XXX models. 46 = solenoid type, MS.006. 006-012 = Orifice size in mm (DN) of valve seat, e.g. 006 = 6mm. 1st X = number of valves in a row: 1 for 40.012/014.XXX models, 1-5 for all other models. 2nd x = PTFE Valve seat: 0 = No, 1 = Yes, 5 = valve with regulated breather and PTFE seat, 9 = solenoid operated with pulsed voltage and PTFE seat (start with Un and then pulsed to reduce power consumption) 3rd X = Speciality: 1 = Valve housing and outlet moulded in one piece, 4 = Valve housing with detachable outlet, 6 = Banking valve with detachable outlet, 7 = Banking valve with valve housing and outlet moulded in one piece, 8 = Single chamber valve with special inlet and membrane. Example code: 46.008.114 = MS.006 type, single chamber solenoid valve with DN 8 valve seat orifice, PTFE valve seat and detachable outlet.

Approval Holder:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

WRAS Approval Number: #2101053

Range of bistable (all models) or monostable/normally closed (19.00x.287 only) solenoid valves with either a plastic body (19.00X.287) or plastic internal body with stainless steel threaded casing (50.005.102 and 50.005.(050) models) with EPDM diaphragms and ‘O’-rings. Maximum working pressures: 50.005.(050) model: 8.0 bar. All other models: 10.0 bar. Maximum operating temperature 70°C

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 2101053
Size:: Please refer to model.
Marking:: A. u. K. Müller, model number, manufacturing date (WW/YY) & technical information on adhesive label on body.
Installation Requirements:: R001 R008
Expiry date:: 31/01/2026
Model:: 50.005.(050): M20. 50.005.102: M20. 19.00X.287: OD 7.5mm.

Product Images

Approval Holder:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

WRAS Approval Number: #2012339

Spherical valve incorporating a brass body and ball, PTFE seat, EPDM and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 2012339
Size:: ½” BSP (M) x ½” BSP (F) captive nut.
Marking:: Pakkens logo on body.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: 8 718 645 509

Product Images

Approval Holder:: Pakkens Yedek Parca ve Makine Sanayi ve Ticaret A.S.

Company Name
Pakkens Yedek Parca ve Makine Sanayi ve Ticaret A.S.
Address
Organize Sanayi Bolgesi, 75. Yil Bulvari No:3, Nilufer 16159
Country
Bursa,

View All Listings by this Company
Manufacturer:: Pakkens Yedek Parca ve Makine Sanayi ve Ticaret A.S.

Company Name
Pakkens Yedek Parca ve Makine Sanayi ve Ticaret A.S.
Address
Organize Sanayi Bolgesi, 75. Yil Bulvari No:3, Nilufer 16159
Country
Bursa,

View All Listings by this Company

WRAS Approval Number: #2101311

Range of spherical valves incorporating DZR brass bodies and balls (nickel plated), EPDM ‘O’-rings, PTFE seats and red or blue coloured lever type operating members. Maximum working pressure 16.0 bar for compression models Maximum working pressure 40.0 bar for 1¼”-2” RP Female & pressfit models Maximum working pressure 50.0 bar ½”-1” RP Female & pressfit models. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 2101311
Size:: see model
Marking:: Herz logo (heart), size, pressure, CR and manufacturer logo (K) cast on body. Herz and Herz logo (heart) on operating member.
Installation Requirements:: R001
Expiry date:: 31/01/2026
Model:: 1 2190 01 ½" BSP (F) 1 2190 02 ¾" BSP (F) 1 2190 03 1" BSP (F) 1 2190 04 1 ¼" BSP (F) 1 2190 05 1 ½" BSP (F) 1 2190 06 2" BSP (F) 1 2190 21 ½" BSP (F) 1 2190 22 ¾" BSP (F) 1 2190 23 1" BSP (F) 1 2190 24 1 ¼" BSP (F) 1 2190 25 1 ½" BSP (F) 1 2190 26 2" BSP (F) 1 2190 41 15mm compression 1 2190 42 22mm compression 1 2190 43 28mm compression 1 2190 44 35mm compression 1 2190 45 42mm compression 1 2190 46 54mm compression 1 2190 51 15mm compression 1 2190 52 22mm compression 1 2190 53 28mm compression 1 2190 54 35mm compression 1 2190 55 42mm compression 1 2190 56 54mm compression 1 2190 61 15mm compression 1 2190 62 22mm compression 1 2190 63 28mm compression 1 2190 64 35mm compression 1 2190 65 42mm compression 1 2190 66 54mm compression C 2190 01 15mm Pressfit C 2190 02 22mm Pressfit C 2190 03 28mm Pressfit C 2190 04 35mm Pressfit C 2190 05 42mm Pressfit C 2190 06 54mm Pressfit

Product Images

Approval Holder:: Herz Valves UK Ltd

Company Name
Herz Valves UK Ltd
Address
Progress House, Moorfield Point, Moorfield Road
Postcode
GU1 1RU
Country
Slyfield Industrial Estate,
Phone
+44 1483 502211
General Email
sales@herzvalves.com

View All Listings by this Company
Manufacturer:: Herz DD

Company Name
Herz DD
Address
GRMASKA CESTA 3 1275 SMARTNO PRI LITIJI SLOVENIA
General Email

View All Listings by this Company

WRAS Approval Number: #2010077

Range of PVC-U double union ball valves incorporating EPDM O-rings. Maximum working pressure 16.0 bar. (Cold water use only).

Section:: 2270 Valves
Section Subtitle:: Spherical, plastic.
WRAS Approval Number:: 2010077
Marking:: DN, PN, size, flow arrow and EFFAST on body. EFFAST and size on operating member.
Installation Requirements:: R001
Expiry date:: 31/10/2025
Model:: “PVC-U double union ball valve – BX range Imperial Size solvent cement UK codes RBA22A0160 size. size 3/8”,, RBA22A0200 size ½”, RBA22A0250 size 3/4”, RBA22A0320 size 1”, , RBA22A0400 size 1” ¼”, RBA22A0500 size 1”1/2”, RBA22A0630 size 2”, RBA22A0750 size 2”1/2”, RBA22A090 size 3”, RBA22A1100 size 4”, Imperial Size solvent cement Effast codes BARBXA0160 size 3/8”, BARBXA0200 size ½”, BARBXA0250 size 3/4”, BARBXA0320 size 1”, BARBXA0400 size 1” ¼”, BARBXA0500 size 1”1/2”, BARBXA0630 size 2”, BARBXA0750 size 2”1/2”, BARBXA0900 size 3”, RBABXA1100 size 4”, Threaded ends UK codes RBF22F0160 size 3/8”, RBF22F0200 size ½”, RBF22F0250 size 3/4”, RBF22F0320 size 1”, RBF22F0400 size 1” 1/4, RBF22F0500 size 1”1/2”, RBF22F0630 size 2”, RBF22F0750 size 2”1/2”, RBF22F0900 size 3”, RBF22F1100 size 4”, Threaded ends Effast codes BERBXE016A size 3/8”, BERBXE020B size ½”, BERBXE025C size 3/4”, BERBXE032D size 1”, BERBXE040E size 1” 1/4, BERBXE050F size 1”1/2”, BERBXE063G size 2”, BERBXE075H size 2”1/2”, BERBXE090I size 3”, BERBXE110L size 4”, Metric size solvent cement UK codes RBI22I0160 size 16 mm, RBI22I0200 size 20 mm, RBI22I0250 size 25 mm, RBI22I0320 size 32mm, RBI22I0400 size 40 mm, RBI22I0500 size 50 mm, RBI22I0630 size 63 mm, RBI22I0750 size 75 mm, RBI22I090 size 90 mm0, RBI22I1100 size 110 mm, Metric size solvent cement Effast codes BDRBXD0160 size 16 mm, BDRBXD0200 size 20 mm, BDRBXD0250 size 25 mm, BDRBXD0320 size 32 mm, BDRBXD0400 size 40 mm, BDRBXD0500 size 50 mm, BDRBXD0630 size 63 mm, BDRBXD0750 size 75 mm, BDRBXD0900 size 90 mm, BDRBXD1100 size 110 mm. “PVC-U double union ball valve – BK1 range ready to actuator Imperial Size solvent cement Uk codes RBA22A0160A size 3/8”, RBA22A0200A size ½”, RBA22A0250A size 3/4”, RBA22A0320A size 1”, RBA22A0400A size 1” 1/4, RBA22A0500A size 1”1/2”, RBA22A0630A size 2”, RBA22A0750A size 2”1/2”, RBA22A0900 size 3”, RBA22A1100 size 4”, Imperial Size solvent cement Effast codes BARBK1A0160 size 3/8”, BARBK1A0200 size ½”, BARBK1A0250 size 3/4”, BARBK1A0320 size 1”, BARBK1A0400 size 1” 1/4, BARBK1A0500 size 1”1/2”, BARBK1A0630 size 2”, BARBK1A0750, BARBK1A0900 size 3”, BARBK1A1100 size 4”. Metric Size solvent cement UK codes RBI22I0160A size 16 mm, RBI22I0200A size 20 mm, RBI22I0250A size 25 mm, RBI22I0320A size 32 mm, RBI22I0400A size 40 mm, RBI22I0500A size 50 mm, RBI22I0630A size 63 mm, RBI22I0750A size 75 mm, RBI22I0900A size 90 mm, RBI22I1100A size 110 mm, Metric Size solvent cement Effast codes BDRBK1D0160 size 16 mm, BDRBK1D0200 size 20 mm, BDRBK1D0250 size 25 mm, BDRBK1D0320 size 32 mm, BDRBK1D0400 size 40 mm, BDRBK1D0500 size 50 mm, BDRBK1D0630 size 63 mm, BDRBK1D0750 size 75 mm, BDRBK1D0900 size 90 mm, BDRBK1D1100 size 110 mm. Threaded ends UK codes RBF22F0160A size 3/8”, RBF22F0200A size ½”, RBF22F0250A size 3/4”, RBF22F0320A size 1”, RBF22F0400A size 1” 1/4, RBF22F0500A size 1”1/2”, RBF22F0630A size 2”, RBF22F0750A size 1”1/2”, RBF22F0900A size 3”, RBF22F1100A size 4” Threaded ends Effast codes BERBK1E016A size 3/8”, BERBK1E020B size ½”, BERBK1E025C size 3/4”, BERBK1E032D size 1”, BERBK1E040E size 1” 1/4, BERBK1E050F size 1”1/2”, BERBK1E063G size 2”, BERBK1E075H size 2”1/2”, BERBK1E090I size 3” & BERBK1E110L size 4”.

Product Images

Approval Holder:: Polypipe Italia s.r.l.

Company Name
Polypipe Italia s.r.l.
Address
Loc. Pianmercato 5C-D-H Cicagna
Country
Italy
General Email
Christopher.sanguineti@effast.com

View All Listings by this Company

WRAS Approval Number: #2101347

Angled stop valve with a chrome plated brass body and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 2101347
Size:: ½” BSP (M).
Marking:: Hansgrohe on handle. HG and P797IA on body.
Installation Requirements:: R001
Expiry date:: 31/01/2026
Model:: 13901000 Models added December 2024 13 902 000 51 310 000 51 312 000 13 903 000 51 309 000

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2009328

Range of stop valves incorporating brass bodies (brass or chrome plated) with EPDM ‘O’-rings and gaskets. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 2009328
Size:: See model
Marking:: VA (brand of VA Albertoni) & P7451A on body. VA, P7761A & size on body (models ECI0001 & EOL0008)
Installation Requirements:: R001
Expiry date:: 30/09/2025
Model:: AGG103684 ½” x 3/8” AGG106384SD ½” x 3/8” AGG106384TEC ½” x 3/8” C406281SD ½” x 3/8” C408681 ½” x ½” C426481 ½” x 3/8” C428681 ½” x ½” ECI0001R ½” x 3/8” EDAL020 ½” x 3/8” EDAL103694G ½” x 3/8” ELIV0001 ½” x 3/8” ELIV0002 ½” x 3/8” EOL0001 ½” x 3/8” EOL0004 ½” x 3/8” EDAL018R ½” x 3/8 EOL0008F 5/8 x 3/8

Product Images

Approval Holder:: VA Albertoni Srl

Company Name
VA Albertoni Srl
Address
Via S,Rita 34 - 28024 Gozzano (NO)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2012071

Range of screw down stop valves with plastic bodies to be used with PEX, MDPE and copper pipe. For above ground use only. Maximum working pressure 16.0 bar, cold water use only.

Section:: 2320 Valves
Section Subtitle:: Stop, plastic, screw down.
WRAS Approval Number:: 2012071
Note:: To be used with PE pipes manufactured to EN 12201, Copper pipe to BS EN 1057 or PEX pipes to BS7291.
Size:: See Model
Marking:: John Guest Logo and flow arrow on body. John Guest, size and PN on collet.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: Stop Valves for use with PE Pipes: UGSTV2020 - 20mm pushfit x 20mm pushfit Stop Cock UGSTV2525 - 25mm pushfit x 25mm pushfit Stop Cock UGSTV3232 - 32mm pushfit x 32mm pushfit Stop Cock Stop Valves for use with PE x Copper or PEX Pipes: UGSTV2515 - 25mm pushfit x 15mm pushfit Stop Cock UGSTV2522 - 25mm pushfit x 22mm pushfit Stop Cock

Product Images

Approval Holder:: RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #2012326

Front loading, commercial washing machine. Flow is supplied via solenoid valves and the unit incorporates a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 2370 Washing Machines
Section Subtitle:: Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2012326
Size:: Stainless steel braided EPDM lined flexible hose assembly with ¾” captive nut end connectors.
Marking:: Schulthess logo, Schulthess and Professional Swiss made on front of machine. Schulthess, model, address and technical information on rear of unit.
Installation Requirements:: R001 R160 R574
Expiry date:: 31/12/2025
Model:: proLine W65– 7 Kg capacity – product code 4201.1 proLine W80 – 9 Kg capacity – product code 4202.1 proLine W100 – 11 Kg capacity – product code 4203.1 Models added September 2021: proLine W130 – 14 Kg capacity – product code 4204.1 proLine W160 – 18 Kg capacity – product code 4205.1 Variant codes can be applied after the product code and consist of the following: B – pre paid card system B1 – expert plus control H – elevated plinth with lint filter I – USB interface K – elevated plinth L – chrome steel housing N – powerline lock set P – drain pump (not applicable to W130 or W160 models) U – anthracite colour way V – drain valve Y – possibility to attach to external detergents

Product Images

Approval Holder:: Schulthess Maschinen AG

Company Name
Schulthess Maschinen AG
Address
Landstrasse 37 Wolfhaussen Switzerland
Postcode
CH8633
Phone
0041 (0)55 253 51 11

View All Listings by this Company
Manufacturer:: Schulthess Maschinen AG

Company Name
Schulthess Maschinen AG
Address
Landstrasse 37 Wolfhaussen Switzerland
Postcode
CH8633
Phone
0041 (0)55 253 51 11

View All Listings by this Company