CR(N)(E) ranges of vertical multistage centrifugal pumps with stainless steel (CRN models) or black polymer coated cast iron bodies (CR models) and a stainless steel impeller. The products are available with or without a sensor. Maximum working pressure: 16.0 bar - CR(N)(E) 32 range with 1-7 stages, CR(N)(E) 45 range with 1-5 stages, CR(N)(E) 64 range with 1-5 stages. 30.0 bar - CR(N)(E) 32 range with 8-14 stages, CR(N)(E) 45 range with 6-11 stages, CR(N)(E) 64 range with 6-8 stages. 33.0 bar - CR(N)(E) 45 range with 12-13 stages. Maximum operating temperature - CR models are cold water use only. CRN models are cold water use only up to February 2nd 2023, and 99°C from February 3rd 2023.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301900

Size:

CR/CRN 32: CR/CRN 32, 1-14 stages: DN65 and DN80 flange connection. CRN32, 1-14 stages: 3” PJE connection CR/CRN 45: CR/CRN 45, 1-13 stages: DN80 and DN100 flange connection. CRN45, 1-13 stages: 4” PJE connection. CR/CRN 64: CR/CRN 64, 1-8 stages: DN100 flange connection. CRN64, 1-8 stages: 4” PJE connection.

Marking:

Grundfos and Grundfos logo, model, type, prod/version no., technical information and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

CR/CRN(E) 32-A-B C-D-E-F-XXXX, CR/CRN(E) 45-A-B C-D-E-F-XXXX, CR/CRN(E) 64-A-B C-D-E-F-XXXX. Where: Type range: CR = Pump type and Cast Iron, N = EN 1.4401, E = Preminum Electronically Controlled Motor. 32, 45 or 64 = flow rate m³/h, A = number of impellers (CR/CRN 32 1-14, CR/CRN 45 1-13, CR/CRN 64 1-8). B = number of reduced impellers: 0, 1 or 2 on CR/CRN 32 1-7, CR/CRN 45 1-5, CR/CRN 64 1-8 models, 0 or 2 on all other models. C = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, K = Pump with low NPSH, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange, D = Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). E = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. F = Code for rubber parts: E = EPDM, V = Viton. XXXX = Code for shaft seal: HQQE or V / HUUE or V / HUBE or V /HQBE or V. H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide, E = EPDM, V = Viton. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C ((CIL3) plastic body models), 99°C (S/Steel body models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Note:

R008 does not apply to the stainless steel body models. R415 does not apply if used on a closed circuit.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. UPM4XL (Added October 2024) - Extra-large version with extended performance. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70, 75 or 90. (90 variant added October 2024). E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘Homebooster’ pump with stainless steel body, plastic impeller and EPDM rubber ‘O’-rings. The product is supplied with two loose brass ¾” captive nut x ½” BSP (M) connectors and fibre gaskets for installation on the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301901

Size:

¾” BSP (M) inlet x outlet (to pump). ½” BSP (M) inlet x outlet (to optional brass connectors).

Marking:

Grundfos and Grundfos logo, type, Product no. and technical info on adhesive label on motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

UPA 15-90 N 160 Homebooster.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of wall and ceiling mounted shower outlets with chromium plated brass bodies supplied with various styled chromium plated shower arms. The shower head inlet incorporates a flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212012

Size:

½” BSP (M).

Marking:

DORNBRACHT on Showerhead.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

28 649 670, 28 649 626, 28 649 970, 28 659 970, 28 669 970, 28 679 670, 28 679 970, 28 689 970, 28 699 970, 28 765 980, 28 775 980, 28 786 710, 28 796 710.

Product Images

Approval Holder:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

View All Listings by this Company

Manufacturer:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

View All Listings by this Company

Range of shower elbows/holders with brass or stainless-steel bodies (various finishes). The elbows incorporate a plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models VOLA 070-XX & VOLA 070R-XX are supplied with a shower hose and handset.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212040

Note:

Open outlet use only.

Marking:

VOLA on body of shower elbows/holders

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

Elbow & wall plate: VOLA 070-T2-XX. VOLA 070R-T2-XX. VOLA 070-HT2-XX. Elbow, wall plate, hand shower & hose: VOLA 070-XX. VOLA 070R-XX. XX denotes finish and, on models with brass bodies, is replaced with: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey,12=Mocca,14=Bright Red,15=Dark Blue, 16=Chrome,17=Gloss Black,18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, 61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. XX denotes finish and, on models with stainless steel bodies, is replaced with: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Product Images

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company