Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2206326

WC dual flush outlet valve comprising of ABS plastic body, EPDM gasket and an internal overflow. Cold water use only

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2206326
Size:: 58.82mm Ø.
Marking:: Oceanwell and model code on body
Installation Requirements:: R001 R571 R581
Expiry date:: 30/06/2027
Model:: D33-J316-01

Approval Holder:: Oceanwell (Xiamen) Industrial Co.,Ltd

Company Name
Oceanwell (Xiamen) Industrial Co.,Ltd
Address
33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
Country
China
Phone
+86-592-5710506

View All Listings by this Company
Manufacturer:: Oceanwell (Xiamen) Industrial Co.,Ltd

Company Name
Oceanwell (Xiamen) Industrial Co.,Ltd
Address
33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
Country
China
Phone
+86-592-5710506

View All Listings by this Company

WRAS Approval Number: #2207023

Range of cross and parallel flow water plate heat exchangers with stainless steel bodies. Maximum working pressure primary circuit: 3.0 bar, secondary circuit: 10.0 bar. Maximum operating temperature 80°C.

Section:: 1350 Heat Exchangers
Size:: 15.7mm ID
Marking:: CONDEVO SpA, model and date of manufacture (DD/MM/YY) on label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: Type “W” range of cross and parallel flow heat exchangers, model code is as follows: PP aaFWywRxx. Where: aa = number of plates (from 10 to 34 plates). F = parallel flow. W = identifies shape of plates. y = type of stainless steel, 4 for AISI304L and 6 for AISI316L w = type of coupling plate R (distance between holes 42mm), Q (only for crossed flow) Rxx = coupling plate with xx replaced with numbers denoting distance between holes.

Approval Holder:: Condevo SpA

Company Name
Condevo SpA
Address
Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company
Manufacturer:: Condevo SpA

Company Name
Condevo SpA
Address
Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

WRAS Approval Number: #2112364

Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Size:: ¾” BSP (F) captive nut x ¾” BSP( M) x 3/4” BSP (M)
Marking:: SF (Brand of Kingfisher) PN10, and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: EPH_WAS20_0056

Approval Holder:: Kingfisher International Products Ltd

Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

WRAS Approval Number: #2207042

Water control valve with a DZR brass body and EPDM ‘O’-rings. The product incorporates a pressure sensor, ultrasonic sensor, temperature sensor and a motorised spherical valve with a DZR brass ball (chrome plated) and PTFE seats. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2207042
Note:: This product has not been tested or approved for leak detection and automatic shut-off claims made by the approval holder.
Size:: ¾” BSP (F) inlet and outlet.
Marking:: TOLLCO on adhesive label on body. CR, Size, flow arrow and HELA on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: 2120013 Waterunit - Control (DN20).

Approval Holder:: Tollco AB

Company Name
Tollco AB
Address

View All Listings by this Company

WRAS Approval Number: #2207328

Range of pressure limiter with stainless steel spring, plastic or chrome plated brass bodies. A5.0022.0 and A5.0027.0 incorporate with a stainless-steel mesh filter. Maximum working pressure 10.0 Bar. Maximum operating temperature 65˚C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2207328
Note:: Pressure limiting claims made by the manufacturer have not been verified by test.
Size:: see model
Marking:: A5.0006.0, A5.0014.0, A5.0022.0, A5.00229.0, A5.0027.0: Neoperl moulded on body of insert, Neoperl & direction flow arrow etched on body A5.0004.0, A5.0010.0, A5.0020.0, A5.0025.0: Neoperl moulded on body of insert
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: A5.0004.0 Pressure Limiter D 1bar insert - 18.57mm OD A5.0006.0 Pressure Limiter G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0010.0 Pressure Limiter 2 bar insert - 18.57mm OD A5.0014.0 Pressure Limiter D G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0020.0 Pressure Limiter DS 1 bar insert - 18.57mm OD A5.0022.0 Pressure Limiter DS G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0025.0 Pressure Limiter DS 2 bar insert - 18.57mm OD A5.0027.0 Pressure Limiter DS G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0029.0 Pressure Limiter DS G1/2 2 bar - OF - ½”BSP(F) x ½”BSP(M)

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company