Inlet hose consisting of a EPDM inner hose layer and corrugated outer cover. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact with water. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240704011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any anti-flooding claims made by the manufacturer have not been verified by test and are covered by this approval).

Size:

¾” BSP captive nut

Marking:

Wuxi Jinhua, Model, WRAS, date of manufacture (YYYY) etched on hose cover.

Installation Requirements:

R001 R150

Expiry date:

31/07/2029

Model:

GJS-FL-115HW - Aquastop inlet hose.

Product Images

Approval Holder:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Range of TPE shower hoses (various finishes) with EPDM seals. Open outlet use only. Maximum operating temperature 60.0°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240902020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) Captive nut

Marking:

Axor on nut

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

28 282 xx0 28 284 xx0 28 286 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of stainless-steel interlocked shower hoses and shower hose extension pieces (smaller length versions) incorporating PE/EPDM and PEX inner tube materials. Available with various surface finishes and end connectors. For further details see model section. Maximum working pressure open outlet use. Maximum operating temperature 85.0°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240402080

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP captive nut. M15x1. All connection sizes can be used with every model of hose.

Marking:

IW, WRAS & year of manufacture (YYYY) on connector

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Model：IW-XXXXXXXX 1st X stands for out diameter: from 13mm to 17mm +/-0.3mm (PVC tube use size 14mm and 15mm) 2nd X stands for outer material: S=stainless steel, B=brass, P=PVC，(PVC outer tube only with PVC inside tube) 3rd X stands for the surface treatment: C=chrome plated, P=stainless steel natural color, B=black, S=sliver, G=Gold,/Gray 4th X stands for fittings material: B=brass, S=stainless steel, Z=Zinc Alloy P=ABS 5th X stands for fittings size and shape: 1/2’ 3/8’ M15x1, M16x1,(M15*1,M16*1 use brass material only use size 13mm and 14mm only) Fitting shape find the attached1. 6th X stands for hose nipple material: B=brass, S=stainless steel, P=POM, N=Nylon 7th X stands for inner tube material:, PVC, EPDM，PEX (EPDM,PEX, tube only use with stainless steel and brass out side) 8th X stands for hose length from 10cm to 300cm. 9th X stands for the fitting number end connection type), which can be a number from 1 to 29, or 51 to 72 with the prefix: Nut and suffix: #, (if different end connection types are used two numbers will be provided Size 1/2” 3/8” (only used for stainless steel outer material) Size M15*1 M16*1 ( use brass material only, use size 13mm and 14mm only) Limits: 1. Size 1/2”can use all fitting number except #51 2. Size 1/2” 3/8” can use #13 and #30， but they are only used for stainless steel outer material. 3. #30 is used for stainless steel outer material and surface treatment of stainless steel natural color Size M15*1 only use #51, M15*1,M16*1 use size 13mm and 14mm only 4. ABS is only used in fitting size of 1/2’ 5. Only 14mm diameter is used nipple materials of stainless steel，POM and Nylon；other diameter only used brass material 6. EPDM,TPE tube only use with stainless steel and brass out side Model code example: IW-17SCB1/2”1/2”SPEX150 Nut 4# & 16#. This gives a 17mm hose with stainless steel interlocked outer, chrome surface finish, brass fittings, ½” end connections at each end, stainless steel nipples, PEX hose inner, 150cm length, end connections type Nut number 4 and 16.

Approval Holder:

Innowin International Co., LTD

Company Name

Innowin International Co., LTD

Address

No.377 Sec 3 Chang Tsao Road

Country

Taiwan

View All Listings by this Company

Range of stainless steel or nylon braided EPDM lined flexible hose assemblies with various brass end connections. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10 Bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240704012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Lux, WRAS, Date of Manufacture (YY), PN&DN stamped on crimped connector

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Bore diameter – DN6 Male M8, M10, M11, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Bore diameter – DN8 Male M10, M11, M12, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Female 1/2” BSP female with swivel conical nut and o-ring Female Elbow 1/4” BSP, 3/8” BSP Female Elbow 3/8” BSP w/gasket Compression 15mm Plug in 10mm (with 2 'O'-rings) Bore diameter – DN10 Male M12, 3/8" BSP, 1/2” BSP Female w/gasket 1/2” BSP, 3/8” BSP, 3/4” BSP Female 1/2” BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in elbow 18.6mm Straight Plug in 17mm Bore diameter – DN13 Male 1/2” BSP, 3/4" BSP Female w/gasket 1/2” BSP, 3/4” BSP Female 3/4"BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in 12mm, 15mm, 29mm, 29mm long Plug in elbow 18mm, 23.6mm, 28mm

Product Images

Approval Holder:

LUXOR S.p.A.

Company Name

LUXOR S.p.A.

Address

Via Madonnina, 94 Montichiari (BS)

Postcode

25018

Country

Italy

Phone

+39 030 9961161

General Email

marco.cauzzi@luxor.it

View All Listings by this Company

Manufacturer:

LUXOR S.p.A.

Company Name

LUXOR S.p.A.

Address

Via Madonnina, 94 Montichiari (BS)

Postcode

25018

Country

Italy

Phone

+39 030 9961161

General Email

marco.cauzzi@luxor.it

View All Listings by this Company

Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241002078

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models.

Marking:

Hualing logo, WRAS and date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.

Approval Holder:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No. 42 Jinshan Road Shagang Industrial Park Shuikou Town

Country

Kaiping City

View All Listings by this Company

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No. 42 Jinshan Road Shagang Industrial Park Shuikou Town

Country

Kaiping City

View All Listings by this Company